JVC Gz Ex310bu User Manual

							Preparing a BD Writer (External Blu-ray Drive)Memo : 
0When connecting this unit to the BD writer (external Blu ray drive), use an
Mini-A (male) - B (male) USB conversion cable. Please note that the
supplied USB cable cannot be used for this purpose.
0 To use the USB cable provided with the BD writer (external Blu-ray drive),
purchase the following USB conversion cable.
(Part number: QAM0852-001) * Mini-A (Male) – A (Female) *Consult your nearest service center.1 Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect the USB cable and the AC adapter.
.
A Connect the USB cable of the BD writer (external Blu-ray drive) to this
unit.
0 The USB cable provided with this unit cannot be used.
B  Connect the AC adapter of the BD writer (external Blu-ray drive).
C  Turn on the BD writer (external Blu-ray drive).
D  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 This unit turns on and the “BACK-UP” menu appears.
0 While the USB cable is connected, the “BACK-UP” menu is
displayed.
0 Refer also to the instruction manual of the BD writer (external Blu-ray
drive).
4 Insert a new disc.
.
A Press the eject button to open the disc tray.
B  Load a new disc properly.
C  Press the eject button to close the disc tray.
Caution : 
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
0 Do not connect the AC adapter provided with this unit to the BD writer.
0 Do not connect the AC adapter provided with the BD writer to this unit.
Copying91 
						

							Creating a Disc
Creating a Disc
1Preparing a BD Writer (External Blu-ray Drive)
0 Insert a new disc into the BD writer (external Blu-ray drive).
“Preparing a BD Writer (External Blu-ray Drive)” ( A p. 91)
2 Copy files to the disc with the following methods.
“Copying All Files” ( A p. 92)
“Copying Files by Date” ( A p. 93)
“Copying Selected Playlists” ( A p. 95)
“Copying Selected Files” ( A p. 96)
Copying All Files
All videos or still images recorded on this unit will be copied.
You can also select and copy only the videos or still images that have never
been copied.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “CREATE FROM ALL” (video) or “SAVE ALL” (still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap “Blu-ray DISC” or “DVD(AVCHD)”.
.
0The media changes to the tapped item. Select the appropriate setting
according to the disc.
0 Selecting “Blu-ray DISC” enables you to save videos in a Blu-ray disc
in the high definition quality.
0 Selecting “DVD(AVCHD)” enables you to save videos in a DVD in the
high definition quality.
4 Tap the media you would like to make a backup.
.
5Tap the desired method.
.
0“ALL SCENES” (video)/“ALL IMAGES” (still image):
All videos or still images in this unit are copied. 0 “UNSAVED SCENES” (video)/“UNSAVED IMAGES” (still
image):
Videos or still images that have never been copied are automatically
selected and copied.
6 Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
7 Tap “AUTO” or “BY DATE”. ( 0010 mode only)
.
0 When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
8 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
9 Tap “OK” when “COMPLETED” is displayed.
.
10Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Copying92 
						

							Caution : 
0Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
While files cannot be added to the DVD-R/DVD-RW later, files can still be added to the BD-R/BD-RE.
0 DVDs that are created in “DVD(AVCHD)” format are playable only on
AVCHD compatible devices.
Memo : 
0 To check the created disc, refer to ““Playing Back with a BD Writer
(External Blu-ray Drive)” ( A p. 98) ”.
“Playing Back with a BD Writer (External Blu-ray Drive)” ( A p. 98)Copying Files by Date
Videos or still images are sorted and copied according to the date on which
they were recorded.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still
image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap “Blu-ray DISC” or “DVD(AVCHD)”.
.
0The media changes to the tapped item. Select the appropriate setting
according to the disc.
0 Selecting “Blu-ray DISC” enables you to save videos in a Blu-ray disc
in the high definition quality.
0 Selecting “DVD(AVCHD)” enables you to save videos in a DVD in the
high definition quality.
4 Tap the media you would like to make a backup.
.
5Tap “CREATE BY DATE” (video) or “SAVE BY DATE” (still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
6 Tap to select a recording date.
.
Copying93 
						

							Memo : 
0You cannot select more than one recording date for copying.
To copy files from multiple recording dates, it is recommended to copy by
creating a playlist.
“Creating Playlists from the Recorded Videos” ( A p. 85)
“Copying Selected Playlists” ( A p. 95)
7
Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
8 Tap “AUTO” or “BY DATE”. ( 0010
 mode only)
.
0 When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
9 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
10 Tap “OK” when “COMPLETED” is displayed.
.
11Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
While files cannot be added to the DVD-R/DVD-RW later, files can still be added to the BD-R/BD-RE.
0 DVDs that are created in “DVD(AVCHD)” format are playable only on
AVCHD compatible devices.
Memo : 0 To check the created disc, refer to ““Playing Back with a BD Writer
(External Blu-ray Drive)” ( A p. 98) ”.
“Playing Back with a BD Writer (External Blu-ray Drive)” ( A p. 98)Copying94 
						

							Copying Selected Playlists
Arrange and copy the created playlists in the order you like.
0 The following is a screen of the model with the built-in memory.
1
Select video mode.
2 Tap “SELECT AND CREATE”.
.
3Tap “Blu-ray DISC” or “DVD(AVCHD)”.
.
0The media changes to the tapped item. Select the appropriate setting
according to the disc.
0 Selecting “Blu-ray DISC” enables you to save videos in a Blu-ray disc
in the high definition quality.
0 Selecting “DVD(AVCHD)” enables you to save videos in a DVD in the
high definition quality.
4 Tap the media you would like to make a backup.
.
5Tap “CREATE BY PLAYLIST”.
.
6Tap on the playlist to copy to disc.
.
00019  appears on the selected playlist (upper row).
Tap  0029 to deselect.
0 Tap on the selected playlist again to check the content of the playlist.
After checking, tap  0029
.
0 Tap  001C
/001D
 or move the zoom lever to display the previous/next playlist.
7 Tap “ADD” to insert a playlist.
.
0Repeat steps 6-7 and arrange the playlists.
0 To change the position of a playlist (lower row), select the insertion
point with  0026/0027  after step 6 and tap “ADD”.
0 0019  appears when the inserted playlist is selected.
Tap  0029 to deselect.
0 Tap on the selected playlist again to check the content of the playlist.
After checking, tap  0029.
0 To delete of a video in the playlist (lower row), tap the video, then tap
“CANCEL”.
8 After arranging, tap “SAVE”.
.
9Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
0 Tap “CHECK” to check the content.
Copying95 
						

							10Tap “OK”.
.
11Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
12 Tap “OK” when “COMPLETED” is displayed.
.
13Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
While files cannot be added to the DVD-R/DVD-RW later, files can still be added to the BD-R/BD-RE.
0 DVDs that are created in “DVD(AVCHD)” format are playable only on
AVCHD compatible devices.
Memo : 
0 A list of playlists is displayed on the top menu of the created DVD.
0 To check the created disc, refer to ““Playing Back with a BD Writer
(External Blu-ray Drive)” ( A p. 98) ”.
“Playing Back with a BD Writer (External Blu-ray Drive)” ( A p. 98)
0 To create a playlist
“Creating Playlists from the Recorded Videos” ( A p. 85)Copying Selected Files
Select and copy the desired videos or still images individually.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still
image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap “Blu-ray DISC” or “DVD(AVCHD)”.
.
0The media changes to the tapped item. Select the appropriate setting
according to the disc.
0 Selecting “Blu-ray DISC” enables you to save videos in a Blu-ray disc
in the high definition quality.
0 Selecting “DVD(AVCHD)” enables you to save videos in a DVD in the
high definition quality.
4 Tap the media you would like to make a backup.
.
5Tap “SELECT FROM SCENES” (video) or “SELECT FROM IMAGES”
(still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
Copying96 
						

							6Tap on the videos or still images to copy.
.
0P appears on the selected files.
To remove  P from a file, tap on the file again.
0 Tap “CHECK” to check the file.
After checking, tap  0029.
7 After selecting all the files, tap “SAVE”.
.
8Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
9 Tap “AUTO” or “BY DATE”. ( 0010 mode only)
.
0 When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
10 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
11 Tap “OK” when “COMPLETED” is displayed.
.
12Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
While files cannot be added to the DVD-R/DVD-RW later, files can still be added to the BD-R/BD-RE.
0 DVDs that are created in “DVD(AVCHD)” format are playable only on
AVCHD compatible devices.
Memo : 
0 To check the created disc, refer to ““Playing Back with a BD Writer
(External Blu-ray Drive)” ( A p. 98) ”.
“Playing Back with a BD Writer (External Blu-ray Drive)” ( A p. 98)Copying97 
						

							Playing Back with a BD Writer (External Blu-ray Drive)
You can play back the Blu-ray discs created on this unit.
1Connect this unit to the BD write and TV.
(If this unit is not connected to a TV, images can be played back on theLCD monitor of this unit.)
.
“Preparing a BD Writer (External Blu-ray Drive)” ( A p. 91)
“Connecting to and Viewing on TV” ( A p. 77)
0 Insert a disc to play back into the BD writer.
2 Tap “PLAYBACK” in the “BACK-UP” menu.
.
0An index screen (thumbnail display) of the videos in the disc appears.
3 Tap on the file to start playback.
.
0For details on video playback, refer to ““Operation Buttons for Video
Playback” ( A p. 64) ”.
“Operation Buttons for Video Playback” ( A p. 64)
0 To exit, stop playback and turn off the camcorder by pressing the  002C
button for about 2 seconds. Then, disconnect the USB cable.
Memo : 
0 To play back the recorded image on TV, connect this unit via the HDMI
mini cable or the AV cord while this unit is connected to the BD writer
(external Blu-ray drives).
“Connecting via the HDMI Mini Connector” ( A p. 77)
“Connecting via the AV Connector” ( A p. 79)Creating Discs with a DVD Writer
You can copy the recorded files to discs or play back the created discs using
an optional DVD writer.
Creating Discs with a DVD Writer
o Preparing a DVD Writer
“Preparing a DVD Writer (CU-VD3)” ( A p. 99)
“Preparing a DVD Writer (CU-VD50)” ( A p. 99)
o Copying to Discs
“Copying All Files” ( A p. 100)
“Copying Files by Date” ( A p. 101)
“Copying Selected Playlists” ( A p. 102)
“Copying Selected Files” ( A p. 104)
o Other Operations
“Playing Back with a DVD Writer” ( A p. 105)
Memo : 
0
Images recorded in UXP mode cannot be copied to a DVD writer.
0 Videos in iFrame format cannot be backed up.
0 When there are many files to back up, it may take time for the backup to
be completed. Wait for a while as the access lamp appears blinking, which
indicates normal operation.
0 Date and time information as saved as subtitles in the created discs.Copying98 
						

							Preparing a DVD Writer (CU-VD3)1Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect the USB cable and the AC adapter.
.
A Connect the USB cable of the DVD writer to this unit.
B  Connect the AC adapter of the DVD writer.
0 Turn on the DVD writer.
C  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 This unit turns on and the “BACK-UP” menu appears.
0 While the USB cable is connected, the “BACK-UP” menu is
displayed.
0 Refer also to the instruction manual of the DVD writer.
4 Insert a new disc.
.
A Press the eject button to open the disc tray.
B  Pull out the tray completely and load a new disc properly.
C  Push the disc tray in until it clicks into place.
Caution : 
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Preparing a DVD Writer (CU-VD50)1 Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect the USB cable and the AC adapter.
.
A Connect the USB cable provided with the DVD writer.
B  Connect the AC adapter of the DVD writer.
0 Turn on the DVD writer.
C  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 This unit turns on and the “BACK-UP” menu appears.
0 While the USB cable is connected, the “BACK-UP” menu is
displayed.
0 Refer also to the instruction manual of the DVD writer.
4 Insert a new disc.
.
A Press the eject button.
B  Pull out the disc tray.
C  Pull out the tray completely and load a new disc properly.
D  Push the disc tray in until it clicks into place.
Caution : 
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Memo : 
0 All buttons on the DVD writer CU-VD50, other than the power and eject
buttons, will not work when connected to this unit.Copying99 
						

							Creating a Disc1Prepare a DVD writer.
0 Insert a new disc into the DVD writer.
“Preparing a DVD Writer (CU-VD3)” ( A p. 99)
“Preparing a DVD Writer (CU-VD50)” ( A p. 99)
2 Copy files to the disc with the following methods.
“Copying All Files” ( A p. 100)
“Copying Files by Date” ( A p. 101)
“Copying Selected Playlists” ( A p. 102)
“Copying Selected Files” ( A p. 104)Copying All Files
All videos or still images recorded on this unit will be copied.
You can also select and copy only the videos or still images that have never
been copied.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “CREATE FROM ALL” (video) or “SAVE ALL” (still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap the media you would like to make a backup.
.
4Tap the desired method.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 “ALL SCENES” (video)/“ALL IMAGES” (still image):
All videos or still images in this unit are copied. 0 “UNSAVED SCENES” (video)/“UNSAVED IMAGES” (still
image):
Videos or still images that have never been copied are automatically
selected and copied.
5 Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
6 Tap “AUTO” or “BY DATE”. ( 0010 mode only)
Copying100