JVC Gz Ex310bu User Manual

							AUTHENTICATE
METHODSet this when the authentication method needs to
be changed.USERNAMEEnter the username.PASSWORDEnter the password.Caution : 
0 It is necessary to obtain an e-mail account in advance.
0 Some web-based mail addresses do not support this feature.
0 These are Gmail settings as of December 2012.
Perform setting manually if changes have been made to the Gmail
specifications.
0 To make use of addresses other than Gmail, please consult the mail
service provider (Internet provider, etc.) for information on the settings.
Registering the Recipient’s E-mail Address of the Camera
Registers the e-mail addresses of recipients on the camera.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “MAIL SETTING”.
(Operation on this camera)
.
6Tap “RECIPIENT'S EMAIL”.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)161 
						

							.
7Tap “ADD”.
(Operation on this camera)
.
8Enter the recipient’s e-mail address.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
9 After tapping “DETECT/MAIL” or “VIDEO MAIL” depending on the
function in use, tap “SET”.
.
0An icon ( 0012) appears after tapping “DETECT/MAIL”, and the
recipient’s e-mail address for the Detect/Mail.
0 An icon ( 000E) appears after tapping “VIDEO MAIL”, and the recipient’s
e-mail address for the VIDEO MAIL.
0 To cancel, press the icon one more time.
Memo : 
0
Up to 8 e-mail addresses can be registered as recipients.Caution : 
0When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0 Check whether notifications indicating errors have been sent to the
sender’s e-mail address. (Make use of a computer or similar devices as it
is not possible to check from the camera.)
If no notifications are received: Refer to “Unable to send e-mails.” and adjust the settings accordingly.
If notifications are received: Check the content of the notification.*Note
Do not continue sending e-mails with the same settings if you receive error
notifications. Depending on the provider, you may be marked as a sender
of spam (junk mail).Using Wi-Fi (GZ-EX355/GZ-EX310)162 
						

							Setting the Detection Method of this Camera (DETECT/MAIL
SETTING)
Sets the detection method to start recording.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( 0012).
(Operation on this camera)
.
4Tap “DETECTION METHOD”.
(Operation on this camera)
.
5Tap “MOTION DETECTION” or “FACE DETECTION” to make a
selection.
.
0Select “MOTION DETECTION” to start recording upon detection of
subject’s movements.
0 Select “FACE DETECTION” to start recording upon detection of
human faces.
Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)
Sets the time period to enable detection again after the previous one.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( 0012).
(Operation on this camera)
.
4Tap “DETECTION INTERVAL”.
(Operation on this camera)
.
5Tap the desired detection interval.
.
0Set the interval to perform detection. By default, it is set to 10 minutes.
Using Wi-Fi (GZ-EX355/GZ-EX310)163 
						

							Setting Self Recording on this Camera (DETECT/MAILSETTING)
Sets whether to record videos on this camera during detection.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( 0012).
(Operation on this camera)
.
4Tap “SELF RECORDING”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to record videos on this camera.
0 Select “OFF” not to record videos on this camera.
Registering the Access Points of the Camera to Connect
(ACCESS POINTS)
There are 4 ways to register the access points (wireless LAN router) for
connection.
Wi-Fi Protected
Setup (WPS)
RegistrationThis is the easiest way of registration.
Authentication method and wireless LAN setup are
performed automatically in WPS, allowing easy
registration of connection settings between
devices.Search and
RegisterA search is conducted to locate access points.
Select and register an access point from the list of search results.Manual
RegistrationEnter the name and authentication method
manually to register an access point.WPS PIN
RegistrationEnter the WPS PIN code of the camera to the
access point to register.Memo : 
0 By registering multiple access points, you can change connection to
another access point by tapping on the desired one from the list.
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)164 
						

							.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch and Register1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
Using Wi-Fi (GZ-EX355/GZ-EX310)165 
						

							7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oManual Registration1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
Using Wi-Fi (GZ-EX355/GZ-EX310)166 
						

							7Tap “MANUAL”.
(Operation on this camera)
.
8Enter the name (SSID) of the access point (wireless LAN router) and tap
“SET”.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
9 Select the type of authentication method (security).
(Operation on this camera)
.
0Select according to the setting of your router.
10 When authentication method is not set to “NONE”, enter a password and
tap “SET”.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
11 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
Using Wi-Fi (GZ-EX355/GZ-EX310)167 
						

							oWPS PIN Registration1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “WPS PIN”.
(Operation on this camera)
.
0The PIN code appears.
8 Enter the PIN code displayed on the camera to the access point
(wireless LAN router).
0 For details on how to enter the PIN code, refer to the instruction
manual of the device in use.
9 Tap “START”.
(Operation on this camera)
.
0Tap “START” after entering PIN code to the wireless LAN router.
(Connection cannot be established if “START” is tapped before
entering the code.)
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
Using Wi-Fi (GZ-EX355/GZ-EX310)168 
						

							Editing LAN Settings of Access Points (Wireless LAN Router)
Change accordingly such as when you want to fix the IP address for the
camera.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “LAN SETTINGS”.
(Operation on this camera)
.
0 Tap “USE” to use the selected access point.
0 Tap “DELETE” to delete the registered access point.
7 Perform the LAN settings. (when “DHCP” is set to “OFF”)
(Operation on this camera)
.
0After setting, tap “OK”.
0 LAN settings comprise of the following items.
DHCPON: Obtains IP address from the DHCP server
automatically.
OFF: Settings of “IP ADDRESS”, “SUBNET
MASK”, “DEFAULT GATEWAY”, “PRIMARY
DNS”, and “SECONDARY DNS” are required.IP ADDRESSEnter the IP address.SUBNET MASKEnter the subnet mask.DEFAULT GATEWAYEnter the default gateway.PRIMARY DNS /SECONDARY DNSEnter the IP addresses of the primary and
secondary DNS servers.Using Wi-Fi (GZ-EX355/GZ-EX310)169 
						

							Setting the Password (DIRECT MONITORING)
Sets the password for direct monitoring. (8 to 32 characters)
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “PASSWORD”.
(Operation on this camera)
.
5Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026
 or  0027
 to move one space to the left or right.
0 After setting, tap “SET”.
6 Tap “SET”.
(Operation on this camera)
0 Settings will not be saved until “SET” is tapped.
Enabling the MAC Address Filter (TV MONITORING)
By enabling “MAC ADDRESS FILTER”, Everio can be searched from the
device (TV monitor); the MAC address of the device needs to be registered to Everio in advance.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “TV MONITORING”.
4 Tap “MAC ADDRESS FILTER”.
5 Select “ON” or “OFF”.
Memo : 
0If “MAC ADDRESS FILTER” is enabled while no MAC address is
registered, Everio can not be searched from all the devices.Using Wi-Fi (GZ-EX355/GZ-EX310)170