JVC Gz Ex310bu User Manual

							.
0The username is “everio” and the default password is “0000”.
“Changing the Settings” ( A p. 153)
4 The recording screen is displayed.
.
5Operate from a smartphone
.
0How to operate from a smartphone
“Using Smartphone Applications” ( A p. 175)
o
Monitoring from the computer (Windows7)1
On the Internet Explorer (web browser), enter the URL (WAN) that is
checked by “Operation on this camera”.
.
2Log in with your username and password.
0 The username is “everio” and the default password is “0000”.
“Changing the Settings” ( A p. 153)
0 Operations from the Web browser
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)211 
						

							DETECT/MAIL
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.Memo : 
0 Perform operations in step 2 and 3 after creating a QR code, and read the
QR code one by one by the camera.
o Enter values in the required items for setting the recipient’s
e-mail address.
0 E-mail address: set the recipient’s e-mail address.
0 E-mail function: set the function of the e-mail that is transmitted to the
recipient’s e-mail address.
0 Up to 8 e-mail addresses can be set.
o Enter values in the required items for setting the sender’s
e-mail address.
0 E-mail address: set the sender’s e-mail address.
o Enter values in the required items for setting the e-mail
server (SMTP server).
0 SMTP server: set the name of the e-mail server (SMTP server) from which
an e-mail account is obtained.
0 SMTP port number: set according to the condition when the e-mail
account is obtained. Normally set to “25”.
0 SMTP authentication method: set according to the condition when the e-
mail account is obtained.
0 User name: set if the SMTP authentication method is set to other than
“None”. (same as the registered user name (account name) when the e-
mail account is obtained)
0 Password: set if the SMTP authentication method is set to other than
“None”. (same as the registered password when the e-mail account is
obtained)
o Enter values in the required items for setting notification
mails.
0 Detection method: set the detection method of when to start recording
video for notification e-mails.
0 Detecting interval: select the time period to enable detection again after
the previous one.
0 Self recording: specify whether to save the detected video on the camera
(ON) or not (OFF).
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
0Contents of the screen vary depending on the QR code that is read
by this unit.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)212 
						

							3Tap “OK”.
.
0Step 2-  E is displayed.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6 Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)213 
						

							.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9 Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other methods, such as “Manual Registration” and “WPS PIN
Registration” are also available. Refer to the following link for details.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
o Regular Operation
Sending a Notification Mail.
1 Tap “MENU”.
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)214 
						

							.
3Tap “DETECT/MAIL” ( 0012).
.
4 Tap “DETECT/MAIL ATTN.”.
.
5Select “DETECT/MAIL ATTN.”, then tap  0029.
.
0 To display the  0012 icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( 000C).
.
7 Start making a connection.
.
8DETECT/MAIL detection standby
.
0Detection is suspended for the first 5 seconds.
9 DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
.
0The “PHOTO” icon appears on the screen for about 2 seconds upon
detection.
0 Images are captured automatically when moving subjects or human
faces appear on the camera’s screen. (The PHOTO icon appears on the screen upon detection.)
0 The captured still images will be sent via e-mail to the selected
recipients.
10 Detection suspended
.
0Until the next detection is made, detection is suspended for the pre-
set length of time.
0 “DETECTION INTERVAL” can be selected from 15 seconds, 1
minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.
“Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)” ( A p. 163)
Check the incoming e-mail.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)215 
						

							VIDEO MAIL
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.Memo : 
0 Perform operations in step 2 and 3 after creating a QR code, and read the
QR code one by one by the camera.
o Enter values in the required items for setting the recipient’s
e-mail address.
0 E-mail address: set the recipient’s e-mail address.
0 E-mail function: set the function of the e-mail that is transmitted to the
recipient’s e-mail address.
0 Up to 8 e-mail addresses can be set.
o Enter values in the required items for setting the sender’s
e-mail address.
0 E-mail address: set the sender’s e-mail address.
o Enter values in the required items for setting the e-mail
server (SMTP server).
0 SMTP server: set the name of the e-mail server (SMTP server) from which
an e-mail account is obtained.
0 SMTP port number: set according to the condition when the e-mail
account is obtained. Normally set to “25”.
0 SMTP authentication method: set according to the condition when the e-
mail account is obtained.
0 User name: set if the SMTP authentication method is set to other than
“None”. (same as the registered user name (account name) when the e-
mail account is obtained)
0 Password: set if the SMTP authentication method is set to other than
“None”. (same as the registered password when the e-mail account is
obtained)
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4 Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
0Contents of the screen vary depending on the QR code that is read
by this unit.
3 Tap “OK”.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)216 
						

							.
0Step 2-  E is displayed.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6 Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)217 
						

							.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9 Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other methods, such as “Manual Registration” and “WPS PIN
Registration” are also available. Refer to the following link for details.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
o Regular Operation
Record videos to send a video mail.
1 Tap “MENU”.
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)218 
						

							.
3Tap “VIDEO MAIL” ( 000E).
.
4 Tap “VIDEO MAIL ATTN.”.
.
5Select “DETECT/MAIL ATTN.”, then tap  0029.
.
0 To display the  0012 icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( 000C).
.
7 Press the START/STOP button to start recording.
.
0Or, tap the REC on screen.
8 Recording starts after the 5-second countdown.
.
0You can allow the recording to be performed for 15 seconds or press
the START/STOP button to stop.
9 Tap “SEND”.
.
0Sending of the video mail starts.
0 To check the file, tap “PLAY TO CHECK”.
0 When it is complete, tap “OK”.
Check the incoming e-mail.
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)219 
						

							TV MONITORING
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.
o Enter values in the required items for the TV monitor.
0 MAC address filter: set to “ON” if monitoring images with a specific TV
device.
0 Add the MAC address: register the physical address when monitoring
images with a specific TV device. (Up to 8 addresses can be registered)
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “SET FROM QR CODE”.
.
6
Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
3Tap “OK”.
.
0Step 2-  E is displayed.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)220