JVC Gz Ex310bu User Manual

							.
0The URL (WAN) for the smartphone to connect to appears.
(Does not appear if DDNS is not set or set incorrectly.)
0 “L UPnP” is displayed when UPnP cannot be used.
7 Check the URL (WAN).
.
0After checking the URL, tap “QUIT” to return to the previous screen.
0 “L UPnP” is displayed when UPnP cannot be used.
o Operation on the smartphone
1
Start “Everio sync. 2” on the smartphone after setting “OUTDOOR
MONITORING”.
.
0Tap “START” in OUTDOOR MONITORING on the camera to start.
2 Tap “OUTDOOR MONITORING”.
.
3Log in with your username and password.
(if authentication cannot be achieved)
.
0 The username is “everio” and the default password is “0000”.
“Changing the Settings” ( A p. 153)
4 The recording screen is displayed.
.
0How to operate from a smartphone
“Using Smartphone Applications” ( A p. 175)
o Monitoring from the computer (Windows7)
1
On the Internet Explorer (web browser), enter the URL (WAN) that is
checked by “Operation on this camera”.
.
2Log in with your username and password.
Using Wi-Fi (GZ-EX355/GZ-EX310)141 
						

							0The username is “everio” and the default password is “0000”.
“Changing the Settings” ( A p. 153)
0 Operations from the Web browser
“Using the Wi-Fi Function from a Web Browser” ( A p. 188)Caution : 
0
To monitor images while you are out, make sure in advance that you can
establish a connection via the Internet by entering the URL (WAN)
displayed in “Network Information”.
However, you cannot monitor (operate) in the same way as while you are out when your smartphone (or computer) is connected via access point
(wireless LAN router) at home.
0 Start using after changing the password.
If the password is not changed, there is a high risk of unauthorized access from others.
Also, avoid using easily guessable passwords, such as birth dates.
You are recommended to change your password periodically.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/
OUTDOOR MONITORING)” ( A p. 155)
0 There is no guarantee that the operations will work with all computer
environments. For example, the video download feature of mobile safari
browser, etc. is not supported.
Caution : 
0 Too much usage may cause high communication fees to be incurred, and
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
0 If the network connection is slow, video images may appear jumpy, or
audio sound may be interrupted or delayed.
0 This function is not designed for disaster or crime prevention.
0 To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0 When not monitoring from a smartphone (or computer), the focus of the
camera is fixed.
0 Even when monitoring from a smartphone (or computer), the focus of the
camera will be fixed if not operated for more than 3 hours. (Focus works
again when the camera is operated.)Sending Still Images via E-mail upon
Detection of Face or Movement (DETECT/ MAIL)
A still image is automatically captured and sent via e-mail when faces or
movements are detected by the camera.
.Memo : 
0Size of the still images shot by DETECT/MAIL is 640 x 360.
0 Operation via connection to a smartphone (or computer) using “INDOOR
MONITORING”/“OUTDOOR MONITORING” may be performed even
during detection standby.
0 When the camera is connected to a smartphone (or computer), “DETECT/
MAIL SETTING” will be temporarily unavailable.
0 You can set to record videos on this unit automatically during detection.
“Recording on this unit” ( A p. 153)
0 To prevent too many e-mails from being sent in case of detections
occurring frequently, you can set the interval of e-mail delivery.
“Setting detection interval” ( A p. 153)
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0 Internet connection
0 Account for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
Settings Required in Advance
To send e-mails, the following settings are required in advance.
*The above settings are not necessary if they have already been set for other
functions.
1 Registering an access point
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
2 Setting the account for sending e-mails
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
3. Registering the recipient’s e-mail address for notification mails (up to 8
addresses)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)
Operation Method
1 Tap “MENU”.
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
.
3 Tap “DETECT/MAIL” ( 0012).
Using Wi-Fi (GZ-EX355/GZ-EX310)142 
						

							.
4Tap “DETECT/MAIL ATTN.”.
.
5Select “DETECT/MAIL ATTN.”, then tap  0029.
.
0 To display the  0012 icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( 000C).
.
7 Start making a connection.
.
8DETECT/MAIL detection standby
.
0Detection is suspended for the first 5 seconds.
9 DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
.
0 The “PHOTO” icon appears on the screen for about 2 seconds upon
detection.
0 Images are captured automatically when moving subjects or human
faces appear on the camera’s screen. (The PHOTO icon appears on
the screen upon detection.)
0 The captured still images will be sent via e-mail to the selected
recipients.
10 Detection suspended
.
0Until the next detection is made, detection is suspended for the pre-
set length of time.
0 “DETECTION INTERVAL” can be selected from 15 seconds, 1
minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.
“Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)” ( A p. 163)
Caution : 
0
This function is not designed for disaster or crime prevention.
0 To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0 While on standby for notification mails, the focus is fixed. Perform the
camera settings first, then enable notification mails.
Focus may not be set correctly if the notification mails start before camera settings are made. In this case, disable notification mails temporarily, then
enable it again.
0 Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0 When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0 If you reply to the received e-mail by using this unit, the receiver can not
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
0 JVC will not be responsible for any trouble that occurs upon the sending
of mails.
Using Wi-Fi (GZ-EX355/GZ-EX310)143 
						

							Record and Send Videos via E-mail (VIDEOMAIL)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With this function, short videos can be delivered easily even on a daily basis, such as to show the growing up of small children to their distant
grandparents.
.Memo : 
0Specifications of the videos sent via video mail are as follows:
System: MP4
Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate
Audio:
- Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
What You Need
0 Wireless LAN router (use a product that has a Wi-Fi certification logo)
0 Internet connection
0 Account for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
Settings Required in Advance
To send e-mails, the following settings are required in advance.
*The above settings are not necessary if they have already been set for other
functions.
1 Registering an access point
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
2 Setting the account for sending e-mails
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
3 Registering the recipient’s e-mail address (up to 8 addresses)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)
Operation Method
1 Tap “MENU”.
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
.
3 Tap “VIDEO MAIL” ( 000E).
.
4
Tap “VIDEO MAIL ADDRESS”.
.
5Select “VIDEO MAIL ADDRESS”, then tap  0029.
.
0 To display the  000E icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( 000C).
.
7 Press the START/STOP button to start recording.
.
0Or, tap the REC on screen.
8 Recording starts after the 5-second countdown.
0 Recording starts immediately after pressing the START/STOP button
again during the countdown.
.
0You can allow the recording to be performed for 15 seconds or press
the START/STOP button to stop.
Using Wi-Fi (GZ-EX355/GZ-EX310)144 
						

							9Tap “SEND”.
.
0Sending of the video mail starts.
0 To check the file, tap “PLAY TO CHECK”.
0 When it is complete, tap “OK”.
Caution : 
0
Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0 When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0 Depending on the e-mail service provider, the sending of video mail may
not be supported.
0 Too much usage may cause high communication fees to be incurred, and
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
0 If you reply to the received e-mail by using this unit, the receiver can not
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
0 JVC will not be responsible for any trouble that occurs upon the sending
of mails.
0 Videos captured via video mail are not saved to the camera or SD card.
0 Videos that have already been captured cannot be sent.Image Monitoring on TV (TV MONITORING)
You can connect this unit to a DLNA compatible TV wirelessly to playback
still images on this unit on the TV screen. (This function may not be available
depending on the DLNA device in use.)
Connect via access point (wireless LAN router) at home.
What You Need
0 DLNA compatible device
0 Wireless LAN router (use a product that has a Wi-Fi certification logo)
Settings Required in Advance
1 Connect the camera to the access point (wireless LAN router).
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
2. Connecting the DLNA compatible device to the access point (this function is available for a connection via cables as well)*The above settings are not necessary if they have already been set for other functions.
Operation Method
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “TV MONITORING” ( 000D).
(Operation on this camera)
.
4Tap “START” ( 000C).
(Operation on this camera)
.
5Start making a connection.
Using Wi-Fi (GZ-EX355/GZ-EX310)145 
						

							(Operation on this camera).
6Connection in progress
.
7After the connection is completed, wait for the DLNA device to start up.
(Operation on this camera)
.
0If a considerable number of videos/still images are recorded in the
camera, it may take some time to start.
8 Operate from the DLNA device
0 From the DLNA device, access to the still image folder on Everio to
select the images to playback.
0 For operation details, refer to the instruction manual of the DLNA
device in use.
9 Images appear on the monitor of the DLNA device
(Operation on DLNA device)
.
0From the following instructions, perform operations on the DLNA
device.
For details on using the TV, refer to the instruction manual of the TV
in use.
Memo : 
0 If the DLNA compatible TV in use cannot detect Everio, tap “STOP” to start
from the step 1 again.Caution : 
0 This function is not designed for disaster or crime prevention.
0 We do not guarantee the compatibility of all the DLNA compatible TVs.
0 This function is available when a connection to the access point is made
with wires as well.
0 To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.EASY STORAGE
You can save the videos and still images to your computer by following easy steps.
Connect to the computer wirelessly via access point at home (wireless LAN
router).
What You Need
0 Computer (install LoiLoFit for Everio in your computer)
“Installing the Provided Software” ( A p. 115)
0 Wireless LAN router (use a product that has a Wi-Fi certification logo)
Settings Required in Advance
1 Registration of the required information for connecting the camera to the
access point (wireless LAN router) is necessary.
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
2 It is also necessary to connect the computer to the access point in advance. *The above settings are not necessary if they have already been set for other functions.
Operation Method
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the shortcut menu ( 0008
).
(Operation on this camera)
.
3Tap “EASY STORAGE”.
(Operation on this camera)
.
4Start making a connection.
(Operation on this camera)
.
Using Wi-Fi (GZ-EX355/GZ-EX310)146 
						

							5Connection is established; backup starts.
(Operation on this camera)
.
6Everio Watcher appears on the task bar of the computer.
0 To see the status of backing up and remaining time, move the arrow
to it.
7 Backup is completed.
(Operation on this camera)
.
0Tap “OK”, or wait for about 10 seconds to turn off the power
automatically.
Memo : 
0
0Recording the Location Information
You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.Memo : 
0To obtain the location information, it is necessary to connect the
smartphone to the camera and start the smartphone application.
Also, setting the “LOC INFO TRANS INT” for the smartphone application is necessary.
“Smartphone Application Settings” ( A p. 186)
0 Activate the GPS function of the smartphone in advance.
0 The recorded location information can be used on the software provided
with this unit.
What You Need
0 Smartphone
Settings Required in Advance
Set up your camera and smartphone by performing the following operations. For a smartphone with WPS support, refer to the “Wi-Fi Protected Setup
(WPS)”.
*WPS is a method to connect the camera and the smartphone wirelessly by easy button operations.
o Connection by entering the Wi-Fi password
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)147 
						

							.
4Tap “START” ( 000C).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
.
5Check the SSID and the PASS being displayed on the screen of the
camera.
.
6Select the SSID in step 5 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone (or computer))
.
0For details on connecting your smartphone (or computer) to a Wi-Fi
network, please refer to the instruction manual of the phone terminal
in use.
7 A connection is established and  0014 appears on the camera’s screen.
.
o
Connection by Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “START” ( 000C).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
.
Using Wi-Fi (GZ-EX355/GZ-EX310)148 
						

							5Tap “WPS”.
(Operation on this camera)
.
6Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
0 To activate WPS, refer to the instruction manual of the device in use.
7 A connection is established and  0014
 appears on the camera’s screen.
.
Operation Method
1 Activate the GPS function of the smartphone.
(Operation on the smartphone)
.
0For details on using the smartphone, refer to the instruction manual
of the device in use.
2 Start “Everio sync. 2” on the smartphone.
.
3Tap “DIRECT MONITORING”.
.
4Monitor screen is displayed.
.
0To change the time interval for obtaining the GPS location information
(OFF-15 sec.), tap  003A.
“Smartphone Application Settings” ( A p. 186)
5 Receiving the location information
(Display on this camera)
.
0When the GPS location information is received from the smartphone,
an icon ( 0027) is displayed on the camera screen.
6 Start recording.
(Operation on this camera)
Using Wi-Fi (GZ-EX355/GZ-EX310)149 
						

							.
0Press the “START/STOP” button to start a normal recording.
Memo : 
0Manual recording cannot be performed.
0 It is not possible to switch to the playback mode.Using the Pan Cradle (Sold Separately)
Panning operation (moving the camera to the left/right, horizontal direction) can be controlled via smartphone by setting the camera on the pan cradle.To use a pan cradle, change the setting of “AV TERMINAL” in advance.
Change the setting from the menu screen of the camera.
o Changing the setting of the AV terminal.
0 By default, the AV terminal is set to “AV”. To use a pan cradle, change the
setting as described in the following steps.1 Tap “MENU”.
(Operation on this camera)
.
2Tap “CONNECTION SETTINGS”.
.
3Tap “AV TERMINAL”.
.
4Tap “PAN CRADLE”.
.
0Tap  L to exit the setting screen.
Using Wi-Fi (GZ-EX355/GZ-EX310)150