JVC Gz Ex310bu User Manual

							.
0When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
7 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
8 Tap “OK” when “COMPLETED” is displayed.
.
9Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
Files cannot be added to the DVD-R/DVD-RW later.
Memo : 
0 To check the created disc, refer to ““Playing Back with a DVD Writer”
( A  p. 105) ”.
“Playing Back with a DVD Writer” ( A p. 105)Copying Files by Date
Videos or still images are sorted and copied according to the date on which
they were recorded.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still
image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap the media you would like to make a backup.
.
4Tap “CREATE BY DATE” (video) or “SAVE BY DATE” (still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
5 Tap to select a recording date.
.
0You cannot select more than one recording date for copying.
To copy files from multiple recording dates, it is recommended to copy
by creating a playlist.
“Creating Playlists from the Recorded Videos” ( A p. 85)
“Copying Selected Playlists” ( A p. 102)
6 Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Copying101 
						

							Prepare the discs accordingly.
0 Tap “CHECK” to check the content.
7 Tap “AUTO” or “BY DATE”. ( 0010 mode only)
.
0 When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
8 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
9 Tap “OK” when “COMPLETED” is displayed.
.
10Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
Files cannot be added to the DVD-R/DVD-RW later.
Memo : 
0 To check the created disc, refer to ““Playing Back with a DVD Writer”
( A  p. 105) ”.
“Playing Back with a DVD Writer” ( A p. 105)Copying Selected Playlists
Arrange and copy the created playlists in the order you like.
0 The following is a screen of the model with the built-in memory.
1
Select video mode.
2 Tap “SELECT AND CREATE”.
.
3Tap the media you would like to make a backup.
.
4Tap “CREATE BY PLAYLIST”.
.
5Tap on the playlist to copy to disc.
.
00019  appears on the selected playlist (upper row).
Tap  0029 to deselect.
0 Tap on the selected playlist again to check the content of the playlist.
After checking, tap  0029.
0 Tap  001C/001D  or move the zoom lever to display the previous/next playlist.
6 Tap “ADD” to insert a playlist.
.
0Repeat steps 5-6 and arrange the playlists.
0 To change the position of a playlist (lower row), select the insertion
point with  0026/0027  after step 5 and tap “ADD”.
0 0019  appears when the inserted playlist is selected.
Tap  0029 to deselect.
0 Tap on the selected playlist again to check the content of the playlist.
After checking, tap  0029.
Copying102 
						

							0To delete of a video in the playlist (lower row), tap the video, then tap
“CANCEL”.
7 After arranging, tap “SAVE”.
.
8Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
0 Tap “CHECK” to check the content. After checking, tap  0029.
9 Tap “OK”.
.
10Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
11 Tap “OK” when “COMPLETED” is displayed.
.
12Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
Files cannot be added to the DVD-R/DVD-RW later.
Memo : 0 A list of playlists is displayed on the top menu of the created DVD.
0 To check the created disc, refer to ““Playing Back with a DVD Writer”
( A  p. 105) ”.
“Playing Back with a DVD Writer” ( A p. 105)
0 To create a playlist
“Creating Playlists from the Recorded Videos” ( A p. 85)Copying103 
						

							Copying Selected Files
Select and copy the desired videos or still images individually.0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “SELECT AND CREATE” (video) or “SELECT AND SAVE” (still
image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap  0010 to switch between the video and still image modes.
3 Tap the media you would like to make a backup.
.
4Tap “SELECT FROM SCENES” (video) or “SELECT FROM IMAGES”
(still image).
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
5 Tap on the videos or still images to copy.
.
0P appears on the selected files.
To remove  P from a file, tap on the file again.
0 Tap “CHECK” to check the file.
After checking, tap  0029.
0 While the video mode is shown in the image, the same operations
apply for the still image mode.
6 After selecting all the files, tap “SAVE”.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
7 Tap “EXECUTE”.
.
0The number of discs required to copy the files is displayed.
Prepare the discs accordingly.
8 Tap “AUTO” or “BY DATE”. ( 0010 mode only)
.
0 When “AUTO” is selected, videos with similar recording dates are
displayed in groups.
0 When “BY DATE” is selected, videos are displayed according to
recording dates.
9 Tap “EXECUTE”.
.
0When “INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
EXIT” appears, change the disc.
10 Tap “OK” when “COMPLETED” is displayed.
.
11Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 All DVDs will be finalized automatically.
Files cannot be added to the DVD-R/DVD-RW later.
Memo : 
0 To check the created disc, refer to ““Playing Back with a DVD Writer”
( A  p. 105) ”.
“Playing Back with a DVD Writer” ( A p. 105)Copying104 
						

							Playing Back with a DVD Writer
You can play back the DVDs created on this unit.
1Connect this unit to the DVD writer and TV.
(If this unit is not connected to a TV, images can be played back on the
LCD monitor of this unit.)
.
“Preparing a DVD Writer (CU-VD3)” ( A p. 99)
“Preparing a DVD Writer (CU-VD50)” ( A p. 99)
2 Tap “PLAYBACK” in the “BACK-UP” menu.
.
0An index screen (thumbnail display) of the videos in the disc appears.
3 Tap on the file to start playback.
.
0Tap “ 0029” to return to the “BACK-UP” menu.
0 For details on video playback, refer to ““Operation Buttons for Video
Playback” ( A p. 64) ”.
“Operation Buttons for Video Playback” ( A p. 64)
0 To exit, stop playback and turn off the camcorder by pressing the  002C
button for about 2 seconds. Then, disconnect the USB cable.
Memo : 
0 To play back the recorded image on TV, connect this unit via the HDMI
mini cable or the AV Cord while this unit is connected to the DVD writer.
“Connecting via the HDMI Mini Connector” ( A p. 77)
“Connecting via the AV Connector” ( A p. 79)Creating a Disc Using a Connected Blu-ray
Recorder
You can create discs using a Blu-ray recorder by connecting it to this unit
using a USB cable.
0 The following is a screen of the model with the built-in memory.1
Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect to a Blu-ray recorder.
.
A Connect using the provided USB cable.
B  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 This unit powers on automatically when the AC adapter is connected,
and the “SELECT DEVICE” screen is displayed.
0 Be sure to use the supplied AC adapter.
0 This unit turns on and the “SELECT DEVICE” screen appears.
4 Tap “CONNECT TO OTHER”.
.
5Tap the desired media.
.
0The following screen is displayed after the camera operation is
completed.
.
0Operations are to be performed on the Blu-ray recorder after the
screen switches.
6 Perform dubbing on the Blu-ray recorder.
Copying105 
						

							0Refer also to the instruction manual of the Blu-ray recorder.
0 After dubbing is complete, disconnect the USB cable. Operations
cannot be performed on this unit until the USB cable is disconnected.Dubbing Files to a Disc by Connecting to a
DVD Recorder
You can dub videos in standard quality by connecting to a DVD recorder. 0 Refer also to the instruction manuals of the TV and DVD recorder.1
Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect to a DVD recorder.
.
A Connect using the provided AV cable.
B  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 Be sure to use the supplied AC adapter.
4 Tap “
						

							Memo : 
0AV cable (P/N: QAM1322-001)
Wiring specifications (for video/audio) of the 4-pole mini plug are described in the following.
For purchasing, consult your nearest JVC service center.
.
Memo : 
0When there are many videos to dub, you can create a playlist in advance
and play it back so that all your favorite videos can be dubbed at once.
“Creating Playlists with Selected Files” ( A p. 85)
“ PLAYBACK PLAYLIST ” ( A p. 72)
0 To include the recording date and time during dubbing, set “DISPLAY
DATE/TIME” in the “PLAYBACK SETTING” menu to “ON”. Or, set
“DISPLAY ON TV” in the “CONNECTION SETTINGS” menu to “ON”.Dubbing Files to a VHS Tape by Connecting
to a VCR
You can dub videos in standard quality by connecting to a VCR.
0 Refer also to the instruction manuals of the TV and VCR.1
Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect to a VCR/DVD recorder.
.
A Connect using the provided AV cable.
B  Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC adapter is connected.
0 Be sure to use the supplied AC adapter.
4 Tap “
						

							Memo : 
0AV cable (P/N: QAM1322-001)
Wiring specifications (for video/audio) of the 4-pole mini plug are described in the following.
For purchasing, consult your nearest JVC service center.
.
Memo : 
0When there are many videos to dub, you can create a playlist in advance
and play it back so that all your favorite videos can be dubbed at once.
“Creating Playlists with Selected Files” ( A p. 85)
“ PLAYBACK PLAYLIST ” ( A p. 72)
0 To include the recording date and time during dubbing, set “DISPLAY
DATE/TIME” in the “PLAYBACK SETTING” menu to “ON”. Or, set
“DISPLAY ON TV” in the “CONNECTION SETTINGS” menu to “ON”.Using a USB External Hard Disk Drive
You can copy video and still image files to a USB external hard disk drive
from this unit. You can also play the files in the USB external hard disk drive
on this unit.
0 Refer also to the instruction manual of the external hard disk drive.
Compatible External Hard Disk Drives
You can use the “LaCie Hard Disk Sleek black design USB2.0” series from LaCie.
Memo : Before purchasing, check the compatible devices on the LaCie website.
0 LaCie
http://www.lacie.com/home.htm?cc=1
0 USB external hard disk drives up to 2 TB can be used.
Copying and Playback with a USB External Hard Disk Drive
“Preparing a USB External Hard Disk Drive” ( A p. 109)
“Copying All Files” ( A p. 109)
“Playing Back Files in the USB External Hard Disk Drive” ( A p. 110)
“Deleting Folders in the USB External Hard Disk Drive” ( A p. 111)
Memo : 
0
Format the USB external hard disk drive when connecting it to this unit for
the first time. (All data will be deleted.)
“Formatting the USB External Hard Disk Drive” ( A p. 111)
0 Refer to the help file of the provided LoiLoFit for Everio software when you
use the PC to operate the data in the USB external hard disk drive directly
copied from this unit.
0 USB external hard disk drives with the capacity over 2 TB cannot be used.
0 Copying may take time. (For example, saving 1 hour video in XP mode
takes about 20 minutes.)
0 When there are many files to back up, it may take time for the backup to
be completed. Wait for a while as the access lamp appears blinking, which
indicates normal operation.
0 Sound or video may be interrupted during playback.Caution : 
0
Do not connect a USB hub between this unit and the USB external hard
disk drive.
0 Disconnect the USB external hard disk drive when using other USB
devices such as DVD writer, external Blu-ray drive, or another USB
external hard disk drive.
0 Avoid the following operations during copying and playing back. - Turning
off the unit or the USB external hard disk drive. - Disconnecting the USB
cable.
0 Do not format the USB external hard disk drive using the PC. If you did,
format again using this unit. (All the data in the USB external hard disk
drive will be erased.)
0 Avoid the following operations using the PC. - Deleting files or folders in
the USB external hard disk drive. - Moving files or folders in the USBexternal hard disk drive. - Changing the name of files or folders in the USB
external hard disk drive.
These operations make the data impossible to be played back on this unit.
0 When you use the PC to edit the data in the USB external hard disk drive,
copy the data to the PC before editing. Editing the data in the USB external
hard disk drive directly from the PC makes the data impossible to be
played back on this unit.
0 Videos in iFrame format cannot be backed up.
Copying108 
						

							Preparing a USB External Hard Disk DriveMemo : 
0When connecting to the external hard disk drive, use a USB cable
indicated below. The USB cable provided with this unit cannot be used.
0 To use the USB cable provided with the USB external hard disk drive,
purchase the following USB conversion cable.
(Part number: QAM0852-001) * Mini-A (Male) – A (Female)
*Consult your nearest service center.1 Remove the AC adapter and battery pack from this unit.
2 Open the LCD monitor.
.
3Connect the USB cable and the AC adapter.
.
*Consult your nearest service center.
A  Connect the USB cable with the USB external hard disk drive.
B  Connect the AC adapter of the USB external hard disk drive.
0 Turn on the external hard disk drive.
C  Connect the AC adapter to this unit.
0 This unit turns on and the “BACK-UP” menu appears.
0 While the USB cable is connected, the “BACK-UP” menu is
displayed.
0 Refer also to the instruction manual of the external hard disk drive.
Caution : 
0Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
0 Do not connect a USB hub between this unit and the USB external hard
disk drive.
Copying All Files
All videos or still images recorded on this unit will be copied.
You can also select and copy only the videos or still images that have never
been copied.
0 The following is a screen of the model with the built-in memory.
1
Select video or still image mode.
2 Tap “BACK UP”.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
0 Tap the  0010
 icon to switch between the video and still image modes.
3 Tap the media you would like to make a backup.
.
4Tap the desired method.
.
0“ALL SCENES” (video)/“ALL IMAGES” (still image):
All videos or still images in this unit are copied. 0 “UNSAVED SCENES” (video)/“UNSAVED IMAGES” (still
image):
Videos or still images that have never been copied are automatically
selected and copied.
5 Check that there is sufficient remaining space on the hard disk drive and
tap “YES”.
.
0Backup starts when “YES” is tapped.
Copying109 
						

							6Tap “OK” when “COMPLETED” is displayed.
.
7Press and hold the  002C button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution : 
0 Do not turn off the power or remove the USB cable until copying is
complete.
0 Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0 Copying may take time. (For example, saving 1 hour video in XP mode
takes about 20 minutes.)
Playing Back Files in the USB External Hard Disk Drive
Videos or still images saved in an external hard disk drive can be played
back on this unit.
1 Tap “PLAYBACK”.
.
2Select video or still image mode.
.
0If step 2 is not displayed, go to step 3.
0 If the backup files of video or still image are not made, these icons
won’t be displayed.
3 Tap on the folder to play back.
.
0Tap “ 0029” to return to the “BACK-UP” menu.
4 Tap on the file to play back.
.
0Tap “ 0029” to return to the folder index screen.
0 For details on video playback, refer to ““Operation Buttons for Video
Playback” ( A p. 64) ”.
“Operation Buttons for Video Playback” ( A p. 64)
0 To exit, stop playback and turn off the camcorder by pressing the  002C
button for about 2 seconds. Then, disconnect the USB cable.
Memo : 
0 Sound or video may be interrupted during playback.Copying110