Iwatsu Adix Vs Owners Manual

							Digital Telephone User’s Guide - 89  Save Number Redial 
Allows you to save a number that you dialed when you receive either a busy signal or 
no answer.  The memory for this feature is shared with Memo Dial. 
 
Operation 
While making a call: 
F Press the Feature button FEAT then dial 21 
Or 
F Press the Save Number Redial button SAVE if assigned as a 
Multipurpose button 
 
You will hear a confirmation tone. 
 
To make a Save Number Redial call: 
F Lift the receiver 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 21 
Or 
F Press the Save Number Redial button SAVE if assigned as a 
Multipurpose button 
Shift Call 
Allows you to initiate a new intercom call without having to hang up if the called 
extension does not answer or if there was a dialing mistake.  This differs from Clear 
Call by allowing you to dial the last digit of an extension number to reach the next 
extension. 
 
Operation 
When you make an intercom call, but the called extension cannot be reached, and you 
wish to reach the next extension number: 
F Do not hang up 
F Dial the last digit of the next desired extension number  
						

							Digital Telephone User’s Guide - 90  Speed Dial 
Allows you to have abbreviated outside number dialing. 
 
System Speed Dial 
Allows you to have access to frequently dialed outside numbers that are common to 
everyone in the office. The numbers may be 32 digits in length and may include the 
insertion of a pause.  There are 90 available System Speed Dial Numbers (00-89). 
 
Personal Speed Dial 
Allows you to program up to 10 frequently dialed outside numbers for either one-
touch or abbreviated dialing (90-99).  The numbers may be 32 digits in length and may 
include the insertion of a pause. 
 
Personal Speed Dial Registration 
 
To register Personal Speed Dial numbers: 
F Press the Feature button FEAT 
F Press the Speed Dial button SPEED 
F Dial the desired Personal Speed Dial Code 90- -99 
F Dial the phone number 
F Press the Feature button FEAT to end the operation 
 
To register several Speed Dial numbers: 
After entering a phone number: 
F Press the Speed button SPEED 
F Dial the next Speed Dial Code 90- -99 
F Repeat the same procedure 
 
To register a pause time: 
When registering the telephone number, at the place where you want to 
insert a pause: 
F Press the Hold button HOLD/DND 
F Dial 1-9 for desired pause time in seconds 
 
To register a Short Flash: 
When registering the telephone number, at the place where you want to 
insert a Short Flash: 
F Press the Flash button FLASH 
  
						

							Digital Telephone User’s Guide - 91  To register an outside line group to be selected for Speed Dialing: 
F Press the Feature button FEAT 
F Press the Speed button SPEED 
F Dial # 
F Dial the desired Personal Speed Dial Code 90- -99 
F Dial the desired outside line group number 01- -10 
F Press the Feature button FEAT to end the operation 
 
To register several outside line groups: 
After entering an outside line group: 
F Press the Speed button SPEED 
F Dial #  
F Dial the next Speed Dial Code number 90- -99 
F Repeat the same procedure 
 
To register a directory name for a Speed Dial Number: 
F Press the Feature button FEAT 
F Press the Speed button SPEED 
F Dial * 
F Dial the desired Personal Speed Dial Code 90- -99 
F Register the letters of the name using the dial pad 
F Press the button until the desired letter is displayed  
F Press the Hold button to enter that letter or number 
 
The name may be 10 characters. 
If you make a mistake, press the Hold button to back space to the desired 
position. 
The numbers on the dial pad represent the following for name registration: 
 
1-,.,(space),1 2 A,B,C,2 3 D,E,F,3 
4 G,H,I,4 5 J,K,L,5 6 M,N,O,6 
7 P,R,S,7 8 T,U,V,8 9 W,X,Y,9 
* Alphanumeric 0 Q,Z,0 # Upper/lower case 
 
F Press the Feature button FEAT to end the operation 
  
						

							Digital Telephone User’s Guide - 92  To register several directory names: 
After entering a name: 
F Press the Speed button SPEED  
F Dial * 
F Dial the next Speed Dial Code number 90- -99 
F Repeat the same procedure 
 
To Speed Dial a Number 
To Speed Dial a registered number, perform one of the following operations: 
 
Outside Line Pre-Select (you select the outside line): 
F Lift the receiver 
F Press the button for an outside line 
F Wait for the dial tone 
F Press the Speed button SPEED  
F Dial Speed Dial Code 
 
The system will automatically dial the registered number. 
 
Quick Dial (the system selects the outside line): 
F Lift the receiver   
F Press the Speed button SPEED  
F Dial Speed Dial Code 
 
The system will automatically dial the registered number.  
This operation will not work unless you register the outside line group 
number. 
  
						

							Digital Telephone User’s Guide - 93  Speed Dial Display Scrolling: 
If your phone is equipped with a display you may display the Speed Dial 
Numbers that are registered in both Personal and System Speed Dial.  If a 
name is associated with this number it will also appear. 
 
To display a number: 
F Press the Speed Dial button SPEED 
F Dial * 
F Dial a Speed Dial code 
 
To scroll up: 
F Dial # 
 
To scroll down: 
F Dial * 
 
To dial displayed number: 
F Press the Speed Dial button SPEED 
Station External Ringer Connection 
Allows for the connection of an external ringer through an IX-LRSP to provide loud 
ringing on incoming calls. 
 
Operation 
F None  
						

							Digital Telephone User’s Guide - 94  Station Restriction Password 
You may enter a personalized password to prevent anyone from using your phone 
when you are not present. The password must be programmed through system 
programming and may be six digits in length. 
 
Operation 
To restrict your phone: 
F Press the Speaker button SPKR 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 44 
Or 
F Press the Lock button LOCK if assigned as a Multipurpose button 
F Dial the password 
F Wait for a confirmation tone 
F Press the Speaker button SPKR 
 
To cancel restriction at your phone: 
F Press the Speaker button SPKR 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 044 
Or 
F Press the Lock button LOCK if assigned as a Multipurpose button 
F Dial the password 
F Wait for a confirmation tone 
F Press the Speaker button SPKR  
						

							Digital Telephone User’s Guide - 95  Text Messaging 
Allows you to send text messages to the display of another system extension. 
 
System Text Messages 
Allows you to have access to frequently used messages that are common to everyone 
in the office. The messages may be 16 characters in length. A maximum of 90 may be 
stored in system memory. 
 
Station Text Messages 
Allows you to program up to 10 frequently used messages for either one-touch or 
abbreviated access. The messages may be 16 characters in length. 
 
Station Text Message Registration 
 
To register Station Text Messages: 
F Press the Feature button FEAT 
F Press the Text Message multipurpose button TXT MSG 
F Dial the desired Personal Text Message Code 90- -99 
F Enter the desired message contents up to 16 characters in length. Use 
the following keys on your telephone for text message data entry: Press 1 2 3 4 5 6 7 8 9 0 HOLD # 1X - A D G J M P T W Q write character lower case 2X . B E H K N R U X Z cancel character upper case 3X sp C F I L O S V Y &   4X 1 2 3 4 5 6 7 8 9 0   F Press the Feature button FEAT to end the operation 
 
To register several Text Messages: 
After entering a text message: 
F Press the Text Message multipurpose button TXT MSG 
F Dial the next Personal Text Message Code 90- -99 
F Repeat the same procedure as above 
 
To Send a Text Message 
To send a registered text message, perform one of the following operations: 
  
						

							Digital Telephone User’s Guide - 96  Busy Bypass Text Message Operation 
To select and send a busy bypass text message to another system extension: 
F While calling a busy or idle extension 
F Press TXT MSG 
F Enter the desired text message number 00-99, or press TXT 
MSGn. 
 
To respond to a busy bypass text message while on a call: 
F While on a call with a busy bypass text message on your display 
F Press TXT MSG + * 
F Enter the desired text message number 00-99, or press TXT 
MSGn. 
F Press TXT MSG 
 
To delete a busy bypass text message from your display: 
F While a text message is on your display  
F Press TXT MSG + # + * 
 
Manual Signaling Text Message Operation 
To select and send a manual signaling text message to another system extension: 
F Lift the receiver 
F Press TXT MSG 
F Enter the desired text message number 00-99, or press TXT 
MSGn. 
F Enter the desired extension number, or press DSS or CCV. 
Group Text Message Operation 
To select and send a text message to a text message group: 
F Lift the receiver 
F Press TXT MSG 
F Enter the desired text message number 00-99, or press TXT 
MSGn. 
F Press the MSGGPn Text Message Group key.  
						

							Digital Telephone User’s Guide - 97  Stored Text Message Operation 
To select and send a stored text message to another system extension: 
F While calling a busy or idle extension 
F Press TXT MSG 
F Enter the desired text message number 00-99, or press TXT 
MSGn. 
F Press # 
 
To display a stored text message: 
F With you TXT MSG key red LED lit 
F Press TXT MSG + # to display a stored text message 
 
To responded to a stored text message by calling the originating extension: 
F With you TXT MSG key red LED lit 
F Press TXT MSG + # to display a stored text message 
F Press # a second time to call the station that sent the text message. 
 
Scrolling and Selecting Text Messages 
To scroll through the available system text messages: 
F Lift the receiver. 
F Press [TXT MSG] + [*] 
F Select a text message number 00-99 
F With a message displayed press # to scroll forward and * to scroll 
backward.  
						

							Digital Telephone User’s Guide - 98  Time Reminder 
Allows you to be reminded that it is a certain time. You are reminded by hearing tones 
that are generated from the phones speaker.  If your phone has a display the word 
Reminder will also appear.  The time must be entered in military time. 
 
Operation 
To set the time: 
F Press the Speaker button SPKR 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 41 
Or 
F Press the Time Reminder button TM REMD  
F Dial the time in military time H H : M M 
F Wait for a confirmation tone 
F Press the Speaker button SPKR 
 
To cancel: 
F Press the Speaker button SPKR 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 041 
Or 
F Press the Time Reminder button TM REMD then dial * 
F Wait for a confirmation tone 
F Press the Speaker button SPKR