Inter-Tel 824 Installation And Field Maintenance Manual

INTER-TEL PRACTICES 
824 INSTALLATIOPJ C MAI=mCE STATION FEATURES 
Issue 1, June 1984 
6. SPECIAL DISPLAY KEYSET FEATURES 
6.01 
Display keysets, 
with LCD message displays, can be used on 
the 824 system. These keysets also has LEDs under the DSS keys 
to create a Busy Lamp Field (BLF). 
keysets include: The special features of these 
A. .Remote Contacts 
B. Absent Mode 
C. Message Registration 
D. Keyset Status Checks 
E. Silent Calls . . 
A. REMOTE COETTACTS 
6.02 As an optional feature, 
control...

INTER-TEL PRACTICES 
824 IHSTALLATIOBl 6r HAINTEHANCE STATION FEATURES 
Issue 1, June 1984 
6.06 To cancel Absent Mode: 
(1) Lift th 
e handset and.press the MEM key. The 
PROGRAM 
MODE” message displays. 
(2) Press the RLS key to .return the keyset to the date/time 
message. 
The MEM key will double flash and then the MEM 
and MSG keys will go out. 
C. 
MESSAGE REGISTRA+IOrJ 
6.07 You may leave a message on yourkeyset when you will be 
away. When the system is initialized messages are: 
01 BACK AT...

INTER-TEL PRACTICES 
STATION FEATURES 
824 IEEiTALLATIOB h MAINTENANCE Issue 1, 
June 1984 
(3) Enter .the two-digit message code using the keypad or 
press the asterisk (*) key repeatedly to view the message 
list until the desired message appears. If you choose 
message 01, 02, 03 or 04, 
enter the special information 
using the keypad: 
._ 
l BACK AT xx:00 - 
Enter the hour you expect to return. 
l TRIP,BACK ON XX - Enter the day of the month when you 
will return. 
l CALL XXXXXXXXXXX - 
Enter the...

INTER-TEL PRACTICES STATIoN FEATURES .. 
824 INSTALLATION & MAI-CE .Issue f, June 1984  
i- D. KEYSET STATUS CHECKS 
6.11 YOU may check the status of your station and for the remote 
contacts with a few keystrokes. This can be done at any time, 
even during a call. 
6.12 To check keyset status: 
(1) Press the INFO key. The STATUS message appears. 
(2) Press the asterisk (*) key repeatedly to view the status 
of the keyset features in the following order: 
l Last two callers while in Absent Mode or NO...

INTER-TEL PRACTICES  STATION FEATURES 
824 INSTALLATION h MAINTENANCE Issue 1, June 1984 
(3) A status message Will appear on your keyset. Possible 
status message,include: 
l C/O CALL - The station user is busy on an outside call. 
l I/C CALL - The station user is busy on an intercom 
call. 
l D/M CALL - The station user is busy on a Door-Mate 
call. 
l IDLE - The station.is not in use. 
l IN USE - The station user is busy on a conference call 
or the handset is off-hook. 
m PAGE - The station is being....

i IBTER-TEL PRACTICES 
INDEX 
824 ILsSTALLhTION h MAINTENANCE 
Issue 1, 
June 1984 
_. 
-- mm 
A 
Absent Mode, 8-36 
Account Codes, 8-2, 8-3, 8-18 
Allowed Area Codes List, 4-21, 8-7 
Allowed Class 411 Calls, 4-20, 8-8 
Alternate Methods of Dialing, 8-21 
last number redial, 8-26; 
off-hook, 8-21 
on-hook, 8-21; 
SCC numbers, manual, 8-22 
SCC numbers, speed dial, 8-25; 
speed dial, 8-22 
Attenuation Pad, 2-5, 3-24 
Audible Tone Indications, 8-13 
AUTO Key, 
8-10, 8-19, 8-20 
priorities, 8-20;...

INTER-TEL PRACTICES 
INDEX 
824 INSTALLATION C MAINTEHANCE 
Issue 1, Junk 1984 
-- C contd -- 
Cabl@g,,2+, 3-3, 3-4 
bridge clips, 3-6, 3-8, 3-11, 3-14 
C.O. 
lines, 3-6, 3-7; 
description, 2-8 
Door-Mate, 3-4, 3-11, 3-12; 
external equipment, 3-11, 3-12 
hot pre-wires, 3-4, 3-14; 
KSU, 3-34, 3-35 
loop limits, 3-2, 3-13; modular jacks, 3-3, 3-4, 3-36 
stations, 3-3, 
3-4, 3-8, 3-9, 3-10, 3-14 
Calendar Setting, programming, 4-15 
Call Forwarding, 8-32 
Call Number Buffering, 8-14 
Call Privacy, 8-6...

INTER-TEL PRACTICES 
INDEX 
824 INSTALLATION & MAImENANCE 
.Issue 1, 
June 1984 
-- C contd -- 
CO1 Jumper PCB, 
description, 2-5; 
installation, 3-24; 
photo, 3-27 
Conference Calls, 2-11, 8-29 
one inside/two outside, 8-30; 
programming, 4-15 
two inside/one outside, 8-30 
Control boards, keyset, 3-42, 3-43 
CPU -- see Central Processor Unit (CPU) PCB 
-- -- D 
Data Base Back-Up, 8-5 
Defective Unit Return Policy, 6-1 
Diagnostic Programming, 5-l 
C.O. Monitor, 5-3; 
Keyset (KTS) Monitor, 5-2 
Station...

INTER-TEL PRACTICES 
INDEX 
824 INSTALLATION & MAINTENANCE 
Issue 1, June 1984 
-- D contd -- 
Door-Mate 
description, 2-3; 
dimensions, 2-3 
installation, 3-44, 3-4s; 
photos, 2-16, 3-46 
procedures, 8-35; 
programming, 4-13; 
volume, 
3-31, 3-33 
see also Cabling: see also Door Interface (DOOR) PCB 
see also Main Distribution Frame (MDF) Backboard 
Door-Mate Interface (DOOR) PCB 
description, 2-7; 
installation, 3-31; 
see also Cabling photo, 3-33 
-_. 
DTMF 
-- see Dual-Tone Multi-Frequency 
Dual-Tone...

INTER-TEL PRACTICES 
INDEX 
824 INSTALLATION & MINTF.NANCE 
.Issue 1, 
June 1984 
-- H contd -- 
I 
Hold Recall Timer, 4-16, 8-28 
Hot Pre-Wires, 3-4, 3-14 
. 
3 
 
f -- -- 
1 
I-Hold, 8-26, 4-13 . . 
Incoming C.O. 
Flash/Tone programming, 4-14 
Incoming Ring Tone programming,.4-12 
INFO Key, 8-10, 8-39 
Initial Programming Procedure, 4-5 
Initialization, 4-6 
Installation, 3-l 
Instruction Stand for keyset, 2-2, 3-41 
Intercom Camp-On and Call Waiting, 8-16 
Intercom Features, 8-15 ; 
., 
Intercom...