HP Officejet J6413 User Manual

							• An Internet connection (required for some features)
NOTE:You can open the embedded Web server without being connected to the
Internet. However, some features will not be available.
• It must be on the same side of a firewall as the device.
Print specifications
Black print resolution
Up to 1200 dpi with pigmented black ink
Color print resolution
HP enhanced photo quality with Vivera inks (up to 4800 by 1200 dpi Optimized on HP Premium
Plus photo papers with 1200 x 1200 input dpi)
Copy specifications
• Digital image processing
• Up to 100 copies from original (varies by model)
• Digital zoom: from 25 to 400% (varies by model)
• Fit to page, pre-scan
• Copy speeds vary according to the complexity of the document
Mode
TypeScan resolution (dpi)
BestBlackup to 600 x 1200
 Colorup to 600 x 1200
NormalBlackup to 300 x 300
 Colorup to 300 x 300
FastBlackup to 300 x 300
 Colorup to 300 x 300
Fax specifications
• Walk-up black-and-white and color fax capability.
• Up to 110 speed dials (varies by model).
• Up to 120-page memory (varies by model, based on ITU-T Test Image #1 at standard
resolution). More complicated pages or higher resolution takes longer and uses more memory.
• Manual fax send and receive.
• Automatic busy redial up to five times (varies by model).
• Automatic no-answer redial one time (varies by model).
• Confirmation and activity reports.
• CCITT/ITU Group 3 fax with Error Correction Mode.
• 33.6 Kbps transmission.
• 3 seconds per page speed at 33.6 Kbps (based on ITU-T Test Image #1 at standard
resolution). More complicated pages or higher resolution take longer and use more memory.
• Ring detect with automatic fax/answering machine switching.
Fax specifications187
 
						

							 Photo (dpi)Very Fine (dpi)Fine (dpi)Standard (dpi)
Black196 x 203 (8-bit
grayscale)300 x 300196 x 203196 x 98
Color200 x 200200 x 200200 x 200200 x 200
Fax to PC Specifications
• Supported file type: Uncompressed TIFF
• Supported fax types: black-and-white faxes
Scan specifications
• Image editor included
• Integrated OCR software automatically converts scanned text to editable text
• Scan speeds vary according to the complexity of the document
• Twain-compliant interface
• Resolution: 2400 x 4800 ppi optical, up to 19,200 ppi enhanced
• Color: 16-bit per RGB color, 48-bit total
• Maximum scan size from glass: 216 x 297 mm (8.5 x 11.7 inches)
• Maximum scan size from ADF: 216 x 356 mm (8.5 x 14 inches)
Environmental specifications
Operating environment
Operating temperature: 5° to 40° C (41° to 104° F)
Recommended operating conditions: 15° to 32° C (59° to 90° F)
Recommended relative humidity: 25 to 75% noncondensing
Storage environment
Storage temperature: -40° to 60° C (-40° to 140° F)
Storage relative humidity: Up to 90% noncondensing at a temperature of 65° C (150° F)
Electrical specifications
Power supply
Universal power adapter (external)
Power requirements
Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz)
Output voltage: 32 Vdc at 940 mA; 16 Vdc at 625 mA
Power consumption
35 watts printing (Fast Draft Mode); 40 watts copying (Fast Draft Mode)
Acoustic emission specifications (print in Draft mode, noise levels
per ISO 7779)
Sound pressure (bystander position)
LpAd 55 (dBA) Appendix C
188
Device specifications 
 
						

							Sound power
LwAd 6.9 (BA)
Memory card specifications
• Maximum recommended number of files on a memory card: 1,000
• Maximum recommended individual file size: 12 megapixel maximum, 8 MB maximum
• Maximum recommended memory card size: 1 GB (solid state only)
NOTE:Approaching any of the recommended maximums on a memory card might cause
the performance of the device to be slower than expected.
Supported memory card types
• CompactFlash (Type I and II)
• Memory Stick, Memory Stock Duo, Memory Stick Pro, MagicGate Memory Stick Duo
• Memory Stick Micro (requires adapter, sold separately)
• Secure Digital
• High Capacity Secure Digital
• miniSD, microSD (requires adapter, sold separately)
• MultiMediaCard (MMC), Secure MultiMediaCard
• Reduced-Size MultiMmediaCard (RS-MMC), MMC Mobile, MMCmicro (requires adapter, sold
separately)
• xD-Picture Card
Memory card specifications189
 
						

							D
Regulatory information
The device meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
FCC statement
•
Notice to users in Korea
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about the power cord
•
Toxic and hazardous substance table
•
LED indicator statement
•
Noise emission statement for Germany
•
Notice to users of the U.S. telephone network: FCC requirements
•
Notice to users of the Canadian telephone network
•
Notice to users in the European Economic Area
•
Notice to users of the German telephone network
•
Australia wired fax statement
•
Regulatory information for wireless products
•
Regulatory model number
•
Declaration of conformity
•
Environmental product stewardship program
190
Regulatory information 
 
						

							FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified 
that the following notice be brought to the attention of users of this product. 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reason-
able protection against harmful interference in a residential installation.  This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
Reorient the receiving antenna.
  Increase the separation between the equipment and the receiver.
  Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
  Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this 
device that are not expressly approved by HP may void the user's authority to operate the 
equipment.
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following 
two conditions:  (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.
Notice to users in Korea
Notice to users in Korea 191
 
						

							VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
Toxic and hazardous substance table
LED indicator statement
LED indicator statement
The display LEDs meet the requirements of EN 60825-1.
Appendix D
192
Regulatory information 
 
						

							Noise emission statement for Germany
Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19
Noise emission statement for Germany 193
 
						

							Notice to users of the U.S. telephone network: FCC requirements
Notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that 
contains, among other information, the FCC Registration Number and Ringer Equivalent 
Number (REN) for this equipment. If requested, provide this information to your telephone 
company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This 
equipment is designed to be connected to the telephone network or premises wiring using 
a compatible modular jack which is Part 68 compliant. This equipment connects to the 
telephone network through the following standard network interface jack: USOC 
RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone 
line and still have all of those devices ring when your number is called. Too many devices 
on one line might result in failure to ring in response to an incoming call. In most, but not 
all, areas the sum of the RENs of all devices should not exceed five (5). To be certain of the 
number of devices you may connect to your line, as determined by the REN, you should call 
your local telephone company to determine the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company might 
discontinue your service temporarily. If possible, they will notify you in advance. If advance 
notice is not practical, you will be notified as soon as possible. You will also be advised of 
your right to file a complaint with the FCC. Your telephone company might make changes 
in its facilities, equipment, operations, or procedures that could affect the proper operation 
of your equipment. If they do, you will be given advance notice so you will have the 
opportunity to maintain uninterrupted service. If you experience trouble with this equipment, 
please contact the manufacturer, or look elsewhere in this manual, for warranty or repair 
information. Your telephone company might ask you to disconnect this equipment from the 
network until the problem has been corrected or until you are sure that the equipment is not 
malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state public utility commis-
sion, public service commission, or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or making 
test calls to emergency numbers:
Remain on the line and explain to the dispatcher the reason for the call.
Perform such activities in the off-peak hours, such as early morning or late evening.
 Note   The FCC hearing aid compatibility rules for telephones are not applicable 
to this equipment.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a 
computer or other electronic device, including fax machines, to send any message unless 
such message clearly contains in a margin at the top or bottom of each transmitted page 
or on the first page of transmission, the date and time it is sent and an identification of the 
business, other entity, or other individual sending the message and the telephone number 
of the sending machine or such business, other entity, or individual. (The telephone number 
provided might not be a 900 number or any other number for which charges exceed local 
or long-distance transmission charges.) In order to program this information into your fax 
machine, you should complete the steps described in the software.
Appendix D
194
Regulatory information 
 
						

							Notice to users of the Canadian telephone network
Note à l’attention des utilisateurs du réseau téléphonique 
canadien/Notice to users of the Canadian telephone network
Cet appareil est conforme aux spécifications techniques des équipements terminaux 
d’Industrie Canada. Le numéro d’enregistrement atteste de la conformité de l’appareil. 
L’abréviation IC qui précède le numéro d’enregistrement indique que l’enregistrement a été 
effectué dans le cadre d’une Déclaration de conformité stipulant que les spécifications 
techniques d’Industrie Canada ont été respectées. Néanmoins, cette abréviation ne signifie 
en aucun cas que l’appareil a été validé par Industrie Canada.
Pour leur propre sécurité, les utilisateurs doivent s’assurer que les prises électriques reliées 
à la terre de la source d’alimentation, des lignes téléphoniques et du circuit métallique 
d’alimentation en eau sont, le cas échéant, branchées les unes aux autres. Cette précaution 
est particulièrement importante dans les zones rurales.
Remarque    Le numéro REN (Ringer Equivalence Number) attribué à chaque 
appareil terminal fournit une indication sur le nombre maximal de terminaux qui 
peuvent être connectés à une interface téléphonique. La terminaison d’une 
interface peut se composer de n’importe quelle combinaison d’appareils, à 
condition que le total des numéros REN ne dépasse pas 5.
Basé sur les résultats de tests FCC Partie 68, le numéro REN de ce produit est 0.0B.
This equipment meets the applicable Industry Canada Terminal Equipment Technical 
Specifications. This is confirmed by the registration number. The abbreviation IC before the 
registration number signifies that registration was performed based on a Declaration of 
Conformity indicating that Industry Canada technical specifications were met. It does not 
imply that Industry Canada approved the equipment.
Users should ensure for their own protection that the electrical ground connections of the 
power utility, telephone lines and internal metallic water pipe system, if present, are 
connected together. This precaution might be particularly important in rural areas.
Note   The REN (Ringer Equivalence Number) assigned to each terminal device 
provides an indication of the maximum number of terminals allowed to be 
connected to a telephone interface. The termination on an interface might consist 
of any combination of devices subject only to the requirement that the sum of the 
Ringer Equivalence Numbers of all the devices does not exceed 5. 
The REN for this product is 0.0B, based on FCC Part 68 test results.
Notice to users of the Canadian telephone network 195
 
						

							Notice to users in the European Economic Area
Notice to users in the European Economic Area
This product is designed to be connected to the analog Switched Telecommunication 
Networks (PSTN) of the European Economic Area (EEA) countries/regions.
Network compatibility depends on customer selected settings, which must be reset to use 
the equipment on a telephone network in a country/region other than where the product 
was purchased. Contact the vendor or Hewlett-Packard Company if additional product 
support is necessary.
This equipment has been certified by the manufacturer in accordance with Directive 
1999/5/EC (annex II) for Pan-European single-terminal connection to the public switched 
telephone network (PSTN). However, due to differences between the individual PSTNs 
provided in different countries, the approval does not, of itself, give an unconditional 
assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the 
unlikely event of problems with loop disconnect dialing, it is recommended to use this 
equipment only with the DTMF tone dial setting.
Notice to users of the German telephone network
Hinweis für Benutzer des deutschen Telefonnetzwerks
Dieses HP-Fax ist nur für den Anschluss eines analogen Public Switched Telephone Network 
(PSTN) gedacht. Schließen Sie den TAE N-Telefonstecker, der im Lieferumfang des 
HP All-in-One enthalten ist, an die Wandsteckdose (TAE 6) Code N an. Dieses HP-Fax kann 
als einzelnes Gerät und/oder in Verbindung (mit seriellem Anschluss) mit anderen zugelass-
enen Endgeräten verwendet werden.
Australia wired fax statement
In Australia, the HP device must be connected to Telecommunication Network through a line 
cord which meets the requirements of the Technical Standard AS/ACIF S008.
Appendix D
196
Regulatory information