HP Officejet 7000 User Manual

							Ink cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printing device.
This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished,
misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end
of warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found
on the product as indicated:
Prepare the device for shipment
NOTE:If you are in Japan, contact HP Customer Support for more information.
After contacting HP Customer Support or returning to the point of purchase, you might be asked to
send the device in for service. If you send the device in for service, make sure you follow the
instructions provided by HP or the associates at the point of purchase when packing and shipping
the device.
Prepare the device for shipment 117
 
						

							C Device specifications
For media and media-handling specifications, see Understand specifications for supported media.
•
Physical specifications
•
Product features and capacities
•
Processor and memory specifications
•
System requirements
•
Network protocol specifications
•
Embedded Web server specifications
•
Print resolution
•
Environmental specifications
•
Electrical specifications
•
Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779)
Physical specifications
Size (width x depth x height)
Device: 575 x 402 x 181 mm (22.7 x 15.8 x 7.13 inches)
Device weight (does not include printing supplies)
Device: 6.7 kg (14.76 lb)
Product features and capacities
FeatureCapacity
Connectivity• USB 2.0-compliant high speed
• Wired network
Ink cartridgesFour ink cartridges (black, yellow, magenta,
cyan)
Supply yieldsVisit www.hp.com/pageyield/ for more
information on estimated ink cartridge yields.
Device languagesHP PCL 3
HP PCL 3 GUI
Font supportUS fonts: CG Times, CG Times Italic, Universe,
Universe Italic, Courier, Courier Italic, Letter
Gothic, Letter Gothic Italic.
Duty cycleUp to 7000 pages per month
Processor and memory specifications
Device processor
192 MHz ARM946ES, ETM9 (medium)
Device memory
64 MB built-in RAM, 32 MB built-in Flash ROM
118 Device specifications
 
						

							System requirements
NOTE:For the most current information about supported operating systems and system
requirements, visit http://www.hp.com/support/.
Operating system compatibility
• For Windows XP SP 2 Starter Edition and Windows Vista Starter Edition, only printer drivers
and the Toolbox are available.
• Linux (For more information, see 
http://www.hp.com/go/linuxprinting).
Minimum requirements
• Microsoft® Windows® XP (32-bit) Service Pack 2: Intel® Pentium® II or Celeron® processor,
512 MB RAM, 228MB free hard disk space, Microsoft Internet Explorer 6.0
• Microsoft® Windows® Vista: 800 MHz 32-bit (x86) or 64-bit (x64) processor, 512MB RAM,
1,156MB free hard disk space, Microsoft Internet Explorer 7.0
• Microsoft Windows 7: 800 MHz 32-bit (x86) or 64-bit (x64) processor, 512 MB RAM, 1,082 MB
free hard disk space, Microsoft Internet Explorer 7.0
•Mac OS X v10.4.11, v10.5.6: PowerPC G4, G5, or Intel Core processor, 256MB memory, 500
MB free hard disk space
Recommended requirements
• Microsoft® Windows® XP (32-bit) Service Pack 2: Intel® Pentium® III or higher processor,
512MB RAM, 824MB free hard disk space, Microsoft Internet Explorer 6.0 or later
• Microsoft® Windows® Vista: 1 GHz 32-bit (x86) or 64-bit (x64) processor, 1GB RAM, 2,569MB
free hard space, Microsoft Internet Explorer 7.0
• Microsoft Windows 7: 1 GHz 32-bit (x86) or 64-bit (x64) processor, 1 GB RAM, 2,515 MB free
hard disk space, Microsoft Internet Explorer 7.0
•Mac OS X v10.4.11, v10.5.6: PowerPC G4, G5, or Intel Core processor, 512MB memory, 500
MB free hard disk space
Network protocol specifications
Network operating system compatibility
• Windows XP (32-bit) (Professional and Home Editions), Windows Vista 32-bit and 64-bit
(Ultimate, Enterprise and Business Edition), Windows 7 (32-bit and 64-bit)
• Mac OS X (10.4.11 and higher,10.5.x)
Compatible network protocols
TCP/IP
Network management
• HP Web Jetadmin plug-ins
• Embedded Web server
Features
Ability to remotely configure and manage network devices
Network protocol specifications 119
 
						

							Embedded Web server specifications
Requirements
• A TCP/IP-based network (IPX/SPX-based networks are not supported)
• A Web browser (either Microsoft Internet Explorer 6.0 or higher, Opera 8.0 or higher, Mozilla
Firefox 1.0 or higher, or Safari 1.2, or higher)
• A network connection (you cannot use the embedded Web server connected directly to a
computer with a USB cable)
• An Internet connection (required for some features)
NOTE:You can open the embedded Web server without being connected to the Internet.
However, some features will not be available.
• It must be on the same side of a firewall as the device.
Print resolution
Black
Up to 1200 dpi with pigmented black ink
Color
HP enhanced photo quality (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers
with 1200 x 1200 input dpi)
Environmental specifications
Operating environment
Operating temperature: 5° to 40° C (41° to 104° F)
Recommended operating conditions: 15° to 32° C (59° to 90° F)
Recommended relative humidity: 20 to 80% noncondensing
Storage environment
Storage temperature: -40° to 60° C (-40° to 140° F)
Storage relative humidity: Up to 90% noncondensing at a temperature of 60° C (140° F)
Electrical specifications
Power supply
Universal power adapter (external)
Power requirements
Input voltage: 100 to 240 VAC (± 10%), 50 to 60 Hz (± 3Hz)
Output voltage: 32 Vdc, 1560 mA
Power consumption
34.03 watts
Acoustic emission specifications (print in Draft mode, noise levels per
ISO 7779)
Sound pressure (bystander position)
LpAd 54 (dBA) Appendix C
120 Device specifications
 
						

							Sound power
LwAd 6.7 (BA)
Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) 121
 
						

							D Regulatory information
This section contains the following topics:
•
FCC statement
•
Notice to users in Korea
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about the power cord
•
Toxic and hazardous substance table
•
LED indicator statement
•
Regulatory model number
•
Declaration of conformity
•
Environmental product stewardship program
•
Third-party licenses
FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified 
that the following notice be brought to the attention of users of this product. 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reason-
able protection against harmful interference in a residential installation.  This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
Reorient the receiving antenna.
  Increase the separation between the equipment and the receiver.
  Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
  Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this 
device that are not expressly approved by HP may void the user's authority to operate the 
equipment.
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following 
two conditions:  (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.
122 Regulatory information
 
						

							Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
Toxic and hazardous substance table
Toxic and hazardous substance table 123
 
						

							LED indicator statement
LED indicator statement
The display LEDs meet the requirements of EN 60825-1.
Regulatory model number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRC-0803 (HP Officejet 7000 Printer). This
regulatory number should not be confused with the marketing name (HP Officejet 7000 Printer
Series) or product number. Appendix D
124 Regulatory information
 
						

							Declaration of conformity
Declaration of conformity 125
 
						

							Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been
designed to separate easily. Fasteners and other connections are easy to locate, access, and
remove using common tools. High priority parts have been designed to access quickly for efficient
disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html
This section contains the following topics:
•
Paper use
•
Plastics
•
Material safety data sheets
•
Recycling program
•
HP inkjet supplies recycling program
•
Disposal of waste equipment by users in private households in the European Union
•
Power consumption
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at:
www.hp.com/go/msds
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions,
and partners with some of the largest electronic recycling centers throughout the world. HP
conserves resources by reselling some of its most popular products. For more information regarding
recycling of HP products, please visit:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges
free of charge. For more information, go to the following Web site:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/ Appendix D
126 Regulatory information