HP LaserJet Pro 400 M401 User Manual
Have a look at the manual HP LaserJet Pro 400 M401 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Print product reports from a touchscreen control panel 1.From the Home screen on the prod uct control panel, touch the Setup button. 2. Touch the Reports button. 3. Touch the name of the report that you want to print. Printer sharing disclaimer HP does not support pe er-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP printer drivers. Go to Microsoft at www.microsoft.com . ENWW Printer sharing disclaimer 9
2 Paper tray ●Supported paper sizes ● Supported paper types ● Load the input trays ENWW 11
Supported paper sizes This product supports a number of paper sizes, and it adapts to various media. NOTE:To obtain best results, select the correct paper size and type in the print driver before printing. Table 2-1 Supported paper and print media sizes Size and dimensions Tray 1Tray 2Optional 500- sheet Tray 3 Duplexer (duplex models only) Letter 216 x 279 mm (8.5 x 11 in) Legal 216 x 356 mm (8.5 x 14 in) A4 210 x 297 mm (8.27 x 11.69 in) A5 148 x 210 mm (5.83 x 8.27 in) A6 105 x 148 mm (4.1 x 5.8 in) B5 (JIS) 182 x 257 mm (7.17 x 10.12 in) Executive 184 x 267 mm (7.24 x 10.51 in) Postcard (JIS) 100 x 148 mm (3.9 x 5.8 in) Double Postcard (JIS) 148 x 200 mm (5.8 x 7.9 in) 16K 184 x 260 mm (7.2 x 10.2 in) 16K 195 x 270 mm (7.7 x 10.6 in) 16K 197 x 273 mm (7.8 x 10.8 in) 8.5 x 13 216 x 330 mm (8.5 x 13 in) 12 Chapter 2 Paper tray ENWW
Table 2-1 Supported paper and print media sizes (continued) Size and dimensions Tray 1Tray 2Optional 500- sheet Tray 3 Duplexer (duplex models only) Envelope Commercial #10 105 x 241 mm (4.13 x 9.49 in) Envelope B5 ISO 176 x 250 mm (6.7 x 9.8 in) Envelope C5 ISO 162 x 229 mm (6.93 x 9.84 in) Envelope DL ISO 110 x 220 mm (4.33 x 8.66 in) Envelope Monarch 98 x 191 mm (3.9 x 7.5 in) Custom 76 x 127 mm to 216 x 356 mm (3.0 x 5.0 in to 8.5 x 14 in) ENWW Supported paper sizes 13
Supported paper types For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/ ljm401series. Paper type (control panel) Paper type (print driver) Tray 1 Tray 2 Optional 500-sheet Tray 3Duplexer (duplex models only) PLAIN 75–95 G Plain HP EcoSMART Lite HP EcoSMART Lite LIGHT 60-74 GLight 60-74g MID-WEIGHT 96-110 Mid-weight HEAVY 111–130 G Heavy 111–130g EXTRA HEAVY 131–175 G Extra heavy 131–175g TRANSPARENCY Monochrome Laser Transparency LABELS Labels LETTERHEAD Letterhead PREPRINTED Preprinted PREPUNCHED Prepunched COLORColored ROUGH Rough BOND Bond RECYCLED Recycled ENVELOPE Envelope 14 Chapter 2 Paper tray ENWW
Load the input trays Load Tray 1 1.Open Tray 1, and pull the tray extension away from the product. 2. For long paper, flip ou t the extension to help hold the paper in the tray. ENWW Load the input trays 15
3.Place the paper stack into Tray 1, and slide the paper guides so that they are against the sheets. 4. Feed the paper stack into the tray as far as it will go. Load Tray 2 1. Pull the tray out of the product. 16 Chapter 2 Paper tray ENWW
2.Slide open the paper length and width guides by pushing outward on the blue tabs. 3. To load Legal-size paper, extend the tray by pressing the release butt on at the back of the tray inward and pulling the back of the tray out. NOTE: When loaded with Legal-size paper, the tray extends from the rear of the product approximately 70 mm (2.75 in). 4. Place the paper in the tray and make sure that it is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper. ENWW Load the input trays 17
5.Push down on the paper to make sure that the paper stack is below th e paper limit tabs on the right side and rear of the tray. 6. Slide the tray into the product. Load optional Tray 3 1.Pull the tray out of the product. 18 Chapter 2 Paper tray ENWW