HP LaserJet Pro 400 M401 User Manual

Print product reports from a touchscreen control panel
1.From the Home screen on the prod uct control panel, touch the Setup  button.
2. Touch the  Reports button.
3. Touch the name of the report that you want to print.
Printer sharing disclaimer
HP does not support pe er-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at 
www.microsoft.com .
ENWW Printer sharing disclaimer
9 

10 Chapter 1   Product introduction ENWW 

2 Paper tray
●Supported paper sizes
●
Supported paper types
●
Load the input trays
ENWW 11 

Supported paper sizes
This product supports a number of paper sizes, and it  adapts to various media.
NOTE:To obtain best results, select the correct paper  size and type in the print driver before printing.
Table 2-1  Supported paper and print media sizes
Size and dimensions Tray 1Tray 2Optional 500-
sheet Tray 3 Duplexer (duplex
models only)
Letter
216 x 279 mm (8.5 x 11 in)
Legal
216 x 356 mm (8.5 x 14 in)
A4
210 x 297 mm (8.27 x 11.69 in)
A5
148 x 210 mm (5.83 x 8.27 in) 
A6
105 x 148 mm (4.1 x 5.8...

Table 2-1  Supported paper and print media sizes (continued)
Size and dimensions Tray 1Tray 2Optional 500-
sheet Tray 3 Duplexer (duplex
models only)
Envelope Commercial #10
105 x 241 mm (4.13 x 9.49 in)
    
Envelope B5 ISO
176 x 250 mm (6.7 x 9.8 in)
    
Envelope C5 ISO
162 x 229 mm (6.93 x 9.84 in)
    
Envelope DL ISO
110 x 220 mm (4.33 x 8.66 in)
    
Envelope Monarch
98 x 191 mm (3.9 x 7.5 in)
    
Custom
76 x 127 mm to 216 x 356 mm
(3.0 x 5.0 in to 8.5 x 14 in)
    
ENWW Supported paper sizes
13 

Supported paper types
For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/support/
ljm401series.
Paper type (control panel) Paper type  (print driver) Tray 1 Tray 2 Optional
500-sheet
Tray 3Duplexer
(duplex
models only)
PLAIN 75–95 G Plain
HP EcoSMART Lite HP EcoSMART Lite
LIGHT 60-74 GLight 60-74g
MID-WEIGHT 96-110 Mid-weight
HEAVY 111–130 G Heavy 111–130g 
EXTRA HEAVY 131–175 G Extra heavy 131–175g
   
TRANSPARENCY Monochrome Laser Transparency
 
LABELS Labels...

Load the input trays
Load Tray 1
1.Open Tray 1, and pull the tray extension away
from the product.  
2.
For long paper, flip ou t the extension to help
hold the paper in the tray.  
ENWW
Load the input trays
15 

3.Place the paper stack into Tray 1, and slide
the paper guides so that they are against the
sheets.  
4.
Feed the paper stack into the tray as far as it
will go.  
Load Tray 2
1.
Pull the tray out of the product.  
16 Chapter 2   Paper tray ENWW 

2.Slide open the paper length and width guides
by pushing outward on the blue tabs.  
3.
To load Legal-size paper, extend the tray by
pressing the release butt on at the back of the
tray inward and pulling the back of the tray
out.
NOTE: When loaded with Legal-size paper,
the tray extends from the rear of the product
approximately 70 mm (2.75 in).  
4.
Place the paper in the tray and make sure that
it is flat at all four corners. Slide the paper
length and width guides so that they are
against the stack...

5.Push down on the paper  to make sure that the
paper stack is below th e paper limit tabs on
the right side and rear of the tray.  
6.
Slide the tray into the product.  
Load optional Tray 3
1.Pull the tray out of the product.  
18 Chapter 2   Paper tray ENWW