HP LaserJet Pro 400 M401 User Manual

Set up HP Wireless Direct Printing
NOTE:This feature is available with wireless models only.
The HP Wireless Direct Printing feature lets you prin t from your wireless mobile device directly to an
HP Wireless Direct-enabled produc t without requiring connection to an established network or the
Internet. Use HP Wireless Direct to prin t wirelessly from the following devices:
● iPhone, iPad, or iTouch using Apple AirPrint
● Mobile devices that run Android, iOS, or Symb
ian using the HP ePrint Home & Biz...

Use HP Web Services applications
Several innovative applications are available for this product that you can download directly from the
Internet. For more information and to download these  applications go to the HP ePrintCenter Web site
at 
www.hpeprintcenter.com.
To use this feature, the product must be connected to a computer or network that has an Internet
connection. HP Web Services must be enabled on the product. Follow this procedure to enable
HP Web Services:
Use HP Web Services applicat ions...

Configure IP network settings
View or change network settings
Use the HP Device Toolbox  to view or change IP configuration settings.
1. Print a configuration page,  and locate the IP address.
● If you are using IPv4, the IP address contains only digits. It has this format:
xxx.xxx.xxx.xxx
● If you are using IPv6, the IP address is a hexa
decimal combination of characters and digits. It
has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2. Open the  HP Device Toolbox by clicking the  Start button,...

5.Use the numeric keypad to enter  the subnet mask, and touch the OK button. Touch the Yes  button
to confirm.
6. Use the numeric keypad to enter th e default gateway, and touch the OK button. Touch the  Yes
button to confirm.
Rename the product on a network
If you want to rename the produc t on a network so that it can be uniquely identified, use the
HP Embedded Web Server.
1. To open the HP Embedded Web Server, type the  product IP address into the address line of a
Web browser.
NOTE: You can also...

Link speed and duplex settings
NOTE:This information applies only to Ethernet netw orks. It does not apply to wireless networks.
The link speed and communication mode of the print server must match the network hub. For most
situations, leave the produc t in automatic mode. Incorrect changes to the link speed and duplex settings
might prevent the product from communicating with  other network devices. If you need to make
changes, use the product control panel.
NOTE: The setting must match with th e...

SettingDescription
10T Full 10 Mbps, full-duplex operation
10T Half 10 megabytes per second (Mbps), half-duplex operation
100TX Full 100 Mbps, full-duplex operation
100TX Half 100 Mbps, half-duplex operation
5.Touch the  OK button. The product turns off and then on.
64 Chapter 4   Manage and maintain ENWW 

HP Device Toolbox (Windows)
Use the HP Device Toolbox for Windows to view or change product settings from your computer. This
tool opens the HP Embedded Web Server for the product.
NOTE: This tool is available only if you performed a  full installation when you installed the product.
1.Click the  Start button, and then click the  Programs item.
2. Click your HP product group, and then click the  HP Device Toolbox item.
Tab or sectionDescription
Home  tab
Provides product, status, and
configuration...

Tab or sectionDescription
Print  tab
Provides the ability to change
default print settings from your
computer. ●
Printing
: Change the default product print setti ngs, such as number of copies and
paper orientation. These are the same opti ons that are available on the control
panel.
● PCL5c
: View and change the PCL5c settings.
● PostScript
: Turn off or on the  Print PS Errors feature.
Networking  tab
Provides the ability to change
network settings from your
computer. Network administrators can use...

HP Utility for Mac OS X
Use the HP Utility for Mac OS X to view or change product settings from your computer. This tool opens
the HP Embedded Web Server for the product.
You can use the HP Utility when the  product is connected with a USB cable or is connected to a TCP/IP-
based network.
Open the HP Utility
▲ From the dock, click 
HP Utility.
-or-
From  Applications , click Hewlett Packard , and then click HP Utility.
HP Utility features
Use the HP Utility software to perform the following tasks:...

HP Web Jetadmin
HP Web Jetadmin is an award-winning, industry-leading tool for efficiently managing a wide variety of
networked HP devices, including  printers, multifunction products, and digital senders. This single
solution allows you to remotely install, monitor,  maintain, troubleshoot, and secure your printing and
imaging environment — ultimately increasing busine ss productivity by helping you save time, control
costs, and protect your investment.
HP Web Jetadmin updates are periodically made av...