HP Designjet Z6200 1524 mm Photo User Manual

Setup menu
Printing preferencesSelect graphics language [E]  
Print quality Select quality level
Enable maximum detail
Enable EconoMode
Color options Color/Grayscale
Select RGB source profile
Emulate printer
Select CMYK source profile [P]
Select rendering intent [P]
Black point compensation [P]
HP PANTONE® emulation [P]
Paper options Select paper size
Remove top/bottom blanks
Resize
Rotate
Enable mirror image
Enable crop lines
Enable printing paper info
Margins Select margins
Select margins layout [E]...

Job management optionsEnable queue [E]  
When to start printing [E]  
Nest options Enable nesting [E]
Select wait time
Enable crop lines [E]
Oversize nested job margin
Autorotate  
Max. number of printed jobs [E]  
Select job recovery mode  
Paper mismatch action  
Front panel options Select language  
Select display contrast  
Enable buzzer  
Select units [E]  
Date and time options View current device time [E]
Set date [E]
Set time [E]
Set time zone [E]
Enable sleep mode  
Sleep mode wait time  
Resets...

Image quality maintenance menu
Optimize print quality  
Optimization actions   
Calibrate color   
Align printheads   
Print diagnostic image   
Paper advance calibration Calibrate paper advance 
Adjust paper advance  
Reset paper advance  
Clean printheads Clean all 
Clean (colors)  
Enable color calibration   
ENWW Image quality maintenance menu
195
Front-panel menus
 

Connectivity menu
Gigabit EthernetView information 
View configuration  
Modify configuration  
Restore factory settings  
USB View information 
Jetdirect EIO View information 
View configuration  
Modify configuration  
Restore factory settings  
Advanced Select I/O timeout 
Allow SNMP  
Embedded Web Server Allow EWS
Reset EWS access control
Web Services Printer utility software
Color and paper management
Restore factory settings  
View information shows whether the interface is installed,  whether the...

Internal prints menu
Demo printsPrint fine arts demo 
Print B&W photo 1  
Print B&W photo 2  
Print Color photo 1  
Print Color photo 2  
Print retail demo 1  
Print retail demo 2  
Print GIS map  
Print GIS aerial photo  
Print drawing demo  
User information pr ints Print menu map  
Print configuration  
Print usage report  
Print HP-GL/2 palette  
Print PS font list [P]  
Service information prints Print current information 
Print usage information  
Print event logs  
Print calibration status  
Print...

Information menu
View printer information  
Printer logs System errors  
System warnings  
Printheads  
Ink cartridges  
View printer information displays general printer informat ion including Product name, Product
number, Serial number, Servic e ID, Language, Memory, Disk capacity and Firmware version.
198 Appendix C   Front-panel menus ENWW
Front-panel menus
 

D Front-panel error messages
Under certain circumstances, a front-panel error message appears. Follow the advice in the
Recommendation column to resolve the error.
If an error message appears  on the front panel that is not included in this list, and you are in doubt
over the correct response, contact HP Support. See 
HP Customer Care on page 176 .
Table D-1   Text messages
Message Recommendation
[Color] cartridge has expired Replace the cartridge. See 
Remove an ink cartridge on page 60 and
Insert an...

Table D-1  Text messages (continued)
Message Recommendation
PDL Error: memory full Restart the printer and try resending the job; if necessary, reduce the
complexity of the job.
PDL Error: out of paper Load more paper.
PDL Error: parsing error The print job is unintelligible to the printer. Try to recreate and resend it.
Check your cable connections.
PDL Error: print mode error The paper type or print quality specified for the job are incorrect.
Change the loaded paper type or the print settings.
PDL...

Table D-2  Numeric error messages (continued)
Error code Recommendation
61:01 Unsupported file format: the printer cannot process the job. Try the following remedies:
● Turn off the printer by using the 
Power key on the front panel and the power switch at the
back of the printer; disconnect the power co rd; then reconnect the power cord and turn
on the printer.
● Make sure that the graphic language setting is correct. See 
Change the graphic
language setting on page 26
.
● Resubmit the file to the...

Table D-2  Numeric error messages (continued)
Error code Recommendation
77:04 An Embedded Web Server internal software  error has occurred. Try the following remedies:
● Turn off the printer by using the 
Power key on the front panel and the power switch at the
back of the printer; disconnect the power co rd; then reconnect the power cord and turn
on the printer.
● Check that your printer firmware is up to date. See 
Update the printer firmware
on page 138
.
If the problem persists, contact HP Support....