HP Color LaserJet CP4005dn User Manual

Control panel messageDescriptionRecommended action
Printing...
DIAGNOSTICS PAGEThe printer is generating the diagnostics
page. The printer will return to the online
Ready state when the page is completed.No action necessary.
Printing...
ENGINE TESTThe printer is generating the engine test
page. The printer will return to the online
Ready state when the page is completed.No action necessary.
Printing...
EVENT LOGThe printer is generating the event log page.
The printer will return to the online  Ready...

Control panel messageDescriptionRecommended action
Processing...
copy  of The printer is currently processing or printing
collated copies. The message indicates that
copy X of Y total copies is currently being
processed.No action necessary.
Processing...
INTERMITTENT MODE
For help press This message might be displayed during
periods of heavy usage if the printer becomes
overheated. If this occurs, the printer enters
a mode in which it prints for one minute and
pauses for one minute. This cycle...

Control panel messageDescriptionRecommended action
PRINT CARTRIDGES
To exit press. Stop
Remove at least one
print cartridge.
To exit press.  StopThe printer is executing a disable cartridge
check or component test where the
component selected is the cartridge motor.Remove one print cartridge.
REPLACE [COLOR]
CARTRIDGE
The supplies gauge will display the
consumption levels of print cartridges.
alternates with
The supplies gauge will display the
consumption levels of print cartridges.The identified print...

Control panel messageDescriptionRecommended action
●Remove the old fuser unit from the
printer.
● Install the new fuser unit.
● Close the top cover.
● Supplies ordering information is
also available from the embedded
Web server. See 
Using theembedded Web server
 for more
information.
REPLACE SUPPLIES
The supplies gauge will display the
consumption levels of print cartridges.Multiple supplies are at the end of their useful
life and the  REPLACE SUPPLIES  setting in
the  SYSTEM SETUP  menu is set to...

Control panel messageDescriptionRecommended action

REPLACE TRANSFER KIT
For help press The transfer unit is at end of life. Printing can
continue but print quality might be reduced.1.Open the top and front cover.
2. Lower the transfer unit by pulling the
green handle at the top of the unit
downward.
3. Depress the small blue latches located
on either side of the bottom of the
transfer unit and lift the unit out of the
printer.
4. Install the new transfer unit.
5. Close the front and top covers.
6....

Control panel messageDescriptionRecommended action
a restore action, such as RESTORE COLOR
VALUES .
Restoring...
factory settingsThe printer is restoring factory settings.No action necessary.
RESTRICTED FROM PRINTING IN COLOR
alternates with
ReadyThe printer is set to  COLOR IF ALLOWED
and you or your software program are not
authorized to print in color.Get your network administrator to set the user
or program permissions that will allow you to
print in color.
Rotating [COLOR]
motor
To exit press....

Control panel messageDescriptionRecommended action
4.Close the image transfer unit and then
close the top and front covers.
5. If the error persists, contact HP Support
at 
http://www.hp.com/support/ljcp4005 .
TRAY X EMPTY
[TYPE] [SIZE]
alternates with
ReadyThe specified tray is empty and the current
job does not need this tray to print.Refill the tray at a convenient time.
TRAY X OPEN
For help press 
alternates with
Ready
The specified tray is open or not closed
completely.Close the tray.
TRAY X SIZE=...

Control panel messageDescriptionRecommended action
to reinitializedevice modes have changed or the printer is
coming out of the diagnostics mode and will
automatically restart.
Waiting for
tray X to liftThe printer is waiting for Tray 2 or optional
Tray 3 to lift.No action necessary.
Warming upThe printer is coming out of sleep mode.
Printing will continue as soon as warmup is
completed.No action necessary.
X.X EMBEDDED
JET DIRECT ERRORThis message is generated by a failure of the
embedded Jetdirect...

Paper jams
Use this illustration to troubleshoot paper jams in the printer. For instructions on clearing paper jams,
see 
Clearing jams.
NOTEAll areas of the printer that might need to be opened to clear jams are equipped with
green handles for rapid identification.
1Top cover area
2Duplex path
3Paper path
4Input path
5Optional Tray 3
Paper jam recovery
This printer automatically provides paper jam recovery, a feature that allows you to set whether the
printer should attempt to automatically reprint...

To disable paper jam recovery
1.Press  Menu to enter the  MENUS.
2. Press 
 to highlight  CONFIGURE DEVICE .
3. Press 
 to select  CONFIGURE DEVICE .
4. Press 
 to highlight  SYSTEM SETUP .
5. Press 
 to select  SYSTEM SETUP .
6. Press 
 to highlight  JAM RECOVERY .
7. Press 
 to select  JAM RECOVERY .
8. Press 
 to highlight  OFF.
9. Press 
 to select  OFF.
10. Press the  Menu button to return to the  Ready state.
To improve print speed and increase memory resources, you might want to disable paper jam...