HP Color LaserJet CP4005dn User Manual

5.Gently pull on the black tabs to pull the formatter board from the printer. Place the formatter board
on a clean, flat, grounded surface.
6.To replace a DDR DIMM that is currently installed, spread the latches apart on each side of the
DIMM slot, lift the DDR DIMM up at an angle, and pull it out.
7.Remove the new DIMM from the antistatic package. Locate the alignment notch on the bottom
edge of the DIMM.
ENWW Installing memory 225
 

8.Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the
metal contacts are not visible.
9.Push down on the DIMM until both latches engage the DIMM.
NOTE If you have difficulty inserting the DIMM, make sure the notch on the bottom of the
DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are
using the correct type of DIMM....

10.Align the formatter board in the tracks at the top and bottom of the slot, and then slide the board
back into the printer.
11.Reconnect the power cable and interface cables, and turn the printer on.
12.If you installed a memory DIMM, go to Enabling memory .
ENWW Installing memory 227
 

Enabling memory
If you installed a memory DIMM, set the printer driver to recognize the newly added memory.
To enable memory for Windows 2000 and Windows XP
1.On the  Start menu, point to  Settings, and click  Printers or Printers and Faxes .
2. Right-click the printer and select  Properties.
3. On the  Device Settings  tab, click Printer Memory  (in the Installable Options  section).
4. Select the total amount of memory that is now installed.
5. Click  OK.
228 Appendix A   Working with memory ENWW
 

B Supplies and accessories
To order supplies in the U.S., contact http://www.hp.com/go/ljsupplies. To order supplies worldwide,
see 
http://www.hp.com/ghp/buyonline.html . To order accessories, see http://www.hp.com/go/
accessories.
ENWW 229
 

Ordering directly through the embedded Web server (for
printers with network connections)
Use the following steps to order printing supplies directly through the embedded Web server (see Using
the embedded Web server .)
1. In the Web browser on the computer, enter the IP address for the printer. The printer status window
appears. Or, go to the URL provided in the alert e-mail.
2. Click  Other Links .
3. Click  Order Supplies . The browser opens to a page in which you can choose to send information
about...

Part numbers
To order supplies through the embedded Web server, select the part numbers you want to order and
follow the instructions on the screen.
Supplies, accessories, and part numbers
PartPart numberType/size
MemoryQ7721ADIMM 128-MB DDR 200-pin SDRAM
 Q7722ADIMM 256-MB DDR 200-pin SDRAM
 Q7723ADIMM 512-MB DDR 200-pin SDRAM
AccessoriesQ7501APrinter stand
 Q7499AOptional 500-sheet paper feeder (Tray 3)
Printer suppliesCB400AHP black print cartridge with
ColorSphere toner
 CB401AHP cyan print...

PartPart numberType/size
 Q6547AHP Professional 120 Glossy Laser Paper
(A4)
 Q6607AHP Color Laser Glossy Photo Paper
(letter), 200 sheets
 Q6614AHP Photo 220 Glossy Laser Paper (A4),
100 sheets
 Q6610AHP Color Laser Brochure Paper (letter),
250 sheets
 Q6616AHP Superior 160 Glossy Laser Paper
(A4), 150 sheets
 C2934AHP Color Laser Transparencies (letter),
50 sheets
 C2936AHP Color Laser Transparencies (A4), 50
sheets
Reference materialsCB503-90901HP Color LaserJet CP4005 User Guide
For downloadable...

PartPart numberType/size
For downloadable versions, go tohttp://www.hp.com/support/ljcp4005.
When connected, select  Manuals
ENWW Part numbers 233
 

234 Appendix B   Supplies and accessories ENWW