HP Color LaserJet CP4005dn User Manual

Control panel messageDescriptionRecommended action
STORAGE FULL4.For 68.1  errors, use the HP Web
Jetadmin software to delete files from
the disk drive.
5. For 68.1  errors that persist, contact
HP Support.
68.X PERMANENT
STORAGE WRITE FAILA non-volatile storage device is full. Pressing
the  button should clear the message.
Printing can continue, but there may be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)1. Press  to continue.
2. If the message persists,...

Control panel messageDescriptionRecommended action
[FS] DEVICE
WRITE PROTECTED
To clear press 
alternates with
Ready
The file system device is protected and no
new files can be written to it.1.To enable writing to the Flash Memory,
turn off write protection, using HP Web
Jetadmin.
2. To clear the message, press the 
 key.
3. If the message persists, turn the printer
off then on.
[FS] FILE
SYSTEM IS FULL
To clear press 
alternates with
Ready
The printer received a PJL file system
command that attempted...

Control panel messageDescriptionRecommended action
The supplies gauge will display the
consumption levels of print cartridges.3.Remove the incorrect print cartridge.
4. Install the correct print cartridge.
5. Close image transfer unit and then close
the top and front covers.
Calibrating...The printer is calibrating.No action necessary.
Canceling... XThe printer is in the process of canceling a
job. The message will continue to be
displayed while the job is stopped, the paper
path flushed, and any...

Control panel messageDescriptionRecommended action
Creating... CLEANING PAGEThis message is displayed while a cleaning
page is being generated. When the page is
complete, the control panel display backs up
one screen to the PRINT QUALITY menu.No action necessary.
When the page is printed, follow the
instructions printed on the cleaning page to
process the page.
CYAN CARTRIDGE IN
WRONG POSITION
alternates with
For help press 
The supplies gauge will display the
consumption levels of print cartridges.
The...

Control panel messageDescriptionRecommended action
DISK FILE
SYSTEM IS FULL
To clear press 
alternates with
Ready
The printer received a PJL file system
command that attempted to store something
on the file system but was unsuccessful
because the file system is full.1.Use the HP Web Jetadmin software to
delete the stored job from the printer
control panel.
2. To clear the message, press the 
 key.
3. If the message persists, turn the printer
off then on.
DISK FILE
SYSTEM IS FULL
To clear press...

Control panel messageDescriptionRecommended action
INCOMPATIBLE SUPPLIES
alternates with
For status press 
The supplies gauge will display the
consumption levels of print cartridges.
At least two supplies are installed that are not
intended for use in this device.1.Press  to access the  SUPPLIES
STATUS  menu.
2. Press 
 and  to highlight the specific
supply that has a problem.
3. Press 
 to view help for the supply.
4. Press 
 and  to step through the
instructions.
Incorrect PINThe wrong PIN was...

Control panel messageDescriptionRecommended action
DIMMS
LOAD TRAY 1:
[TYPE] [SIZE]
alternates with
LOAD TRAY 1:
[TYPE] [SIZE]
For help press Tray 1 is loaded and configured for a type and
size other than the one specified in the job.1.If the correct paper is loaded, press .
2. Otherwise, remove the incorrect paper
and load Tray 1 with the specified paper.
3. If prompted, confirm the size and type of
paper loaded.
4. Confirm that the media guides are in the
correct position.
5. To use another tray,...

Control panel messageDescriptionRecommended action
MAGENTA CARTRIDGE IN
WRONG POSITION
alternates with
For help press 
The supplies gauge will display the
consumption levels of print cartridges.
The magenta cartridge is installed in the
wrong slot and the cover is closed.1.Open the top and front covers.
CAUTION The image
transfer unit can be easily
damaged.
2. Open the image transfer unit.
3. Remove the incorrect print cartridge.
4. Install the correct print cartridge.
5. Close image transfer unit and...

Control panel messageDescriptionRecommended action
Then press  to
print second sides
Moving solenoid
To exit press.  StopThe printer is executing a component test and
the component selected is a solenoid.No action necessary.
Moving solenoid and motor
To exit press.  StopThe printer is executing a component test and
the components selected are the solenoid
and the motor.No action necessary.
No job to cancelThere are no stored jobs that can be
canceled.No action necessary.
NON HP SUPPLY
IN USE
alternates...

Control panel messageDescriptionRecommended action
5.Press  to access help for the supply.
6. Obtain a part number from help.
7. Order the supply.
8. Repeat the previous steps as necessary
for each supply that needs to be
ordered.
9. Supplies ordering information is also
available from the embedded Web
server. See 
Using the embedded Webserver  for more information.
ORDER TRANSFER KIT
LESS THAN X PAGES
For help press 
alternates with
Ready
The transfer unit is near end of life. Printing
can continue.1....