HP Color LaserJet CM4730 User Manual

UNIX
The HP Jetdirect Printer Installer for UNIX is a simple printer installation utility for HP-UX and Solaris
networks. It is available for download from HP Customer Care Online at 
http://www.hp.com/support/
net_printing.
NOTESample model scripts for UNIX (HP-UX, Sun Solaris) are available at http://www.hp.com/
go/unixmodelscripts. Sample model scripts for Linux networks are available at
http://linuxprinting.org.
ENWWUNIX 75
 

76 Chapter 5   Software for other operating systems ENWW
 

6 Connectivity
●Parallel connection
●
USB connection
●
Auxiliary connection
●
Network configuration
●
Network utilities
ENWW77
 

Parallel connection
Establish a parallel connection by connecting the MFP to the computer with a bidirectional parallel cable
(IEEE-1284C compliant) that has a c- connector. The cable can be a maximum of 10 meters (30 feet)
long.
Figure 6-1   Parallel port connection
1C-connector
2Parallel port
NOTETo use the enhanced ca pabilities of the bidirectional para llel interface, ensure that the
most recent printer  driver is installed.
Factory settings support automatic switching betw een the parallel port...

USB connection
This MFP supports USB 2.0 device and host USB connections. The USB ports are located on the back
of the MFP. You must use an A-to-B type USB cabl e that is no longer than 2 meters (6.56 feet)
Figure 6-2  USB connection
1USB connector
2USB port
ENWW USB connection 79
 

Auxiliary connection
This MFP supports an auxiliary connection for paper handling input devices. The port is located on the
back of the MFP.
NOTE This connector cannot be used by the 3- bin mailbox or stapler/stacker accessories.
Figure 6-3  Auxiliary connection
1Auxiliary connection port (Jetlink)
80 Chapter 6   Connectivity ENWW
 

Network configuration
You might need to configure certain network parameters on the device. You can configure these
parameters in the following locations:
●Installation software
●Device control panel
●Embedded Web server
●Management software (HP Web Jetadmin or HP LaserJet Utility for Macintosh)
NOTEFor more information about using the embedded Web server, see
Embedded Web server
For more information on supported networks and network configuration tools, see the HP Jetdirect Print
Server Administrator’s...

6.Touch IPV4 Settings.
7.Touch Config Method.
8.Touch Manual.
9.Touch Save.
10.Touch Manual Settings.
11.Touch IP Address.
12.Touch the IP Address text box.
13.Use the touchscreen keypad to type the IP address.
14.Touch OK.
15.Touch Save.
Set the subnet mask
1.Scroll to and touch Administration.
2.Scroll to and touch Initial Setup.
3.Touch Networking and I/O.
4.Touch Embedded Jetdirect.
5.Touch TCP/IP.
6.Touch IPV4 Settings.
7.Touch Config Method.
8.Touch Manual.
9.Touch Save.
10.Touch Manual Settings....

5.Touch TCP/IP.
6.Touch IPV4 Settings.
7.Touch Config Method.
8.Touch Manual.
9.Touch Save.
10.Touch Manual Settings.
11.Touch Default Gateway.
12.Touch the Default Gateway text box.
13.Use the touchscreen keyboard to type the default gateway.
14.Touch OK.
15.Touch Save.
Configure TCP/IPv6 parameters
For information about configuring the device for a TCP/IPv6 network, see the HP Jetdirect Print Server
Administrators Guide.
Disable network protocols (optional)
By factory default, all supported network...

7.Touch Off.
8.Touch Save.
Disable AppleTalk
1.Scroll to and touch Administration.
2.Scroll to and touch Initial Setup.
3.Touch Networking and I/O.
4.Touch Embedded Jetdirect.
5.Touch AppleTalk.
6.Touch Enable.
7.Touch Off.
8.Touch Save.
Disable DLC/LLC
1.Scroll to and touch Administration.
2.Scroll to and touch Initial Setup.
3.Touch Networking and I/O.
4.Touch Embedded Jetdirect.
5.Touch DLC/LLC.
6.Touch Enable.
7.Touch Off.
8.Touch Save.
HP Jetdirect EIO print servers
HP Jetdirect print servers...