HP Color LaserJet CM4730 User Manual

Menu itemSub-menu itemSub-menu itemValuesDescription
General Copy
BehaviorScan Ahead Enabled (default)
DisabledTurn on no-wait scanning. With Scan Ahead
enabled, the pages in the original document
are scanned to disk and held until the device
becomes available.
Auto Print Interrupt Enabled
Disabled (default)When this feature is enabled, copy jobs can
interrupt print jobs that are set to print multiple
copies.
The copy job is inserted into the print queue
at the end of one copy of the print job. After
the...

Menu itemSub-menu itemSub-menu itemValuesDescription
General Printing
BehaviorOverride A4/Letter No
Yes (default)When this feature is enabled, the job prints on
letter-size paper when an A4 job is sent but
no A4-size paper is loaded in the device (or
prints on A4 paper when a letter-size job is
sent but no letter-size paper is loaded). This
option also overrides A3 with ledger-size
paper and ledger with A3-size paper.
Manual Feed Enabled
Disabled (default)When this feature is enabled, the user can
select...

Menu itemSub-menu itemSub-menu itemValuesDescription
 PCL Form LengthType a value
between 5 and 128
lines. The factory
default is 60 lines.PCL is a set of printer commands that
Hewlett-Packard developed to provide
access to printer features.
OrientationPortrait (default)
LandscapeSelect the orientation that is most often used
for print jobs. Select Portrait if the short edge
is at the top or Landscape if the long edge is
at the top.
Font SourceSelect the source
from the list.Select the font source for...

Print Quality menu
Administration > Print Quality
Table 2-16  Print Quality menu
Menu itemSub-menu itemValuesDescription
Adjust ColorHighlightsCyan Density. Magenta
Density. Yellow Density.
Black Density
+5 to –5. Default is 0.Adjust the darkness or lightness of highlights on a
printed page. Lower values represent lighter highlights
on a printed page, and higher values represent darker
highlights on a printed page.
MidtonesCyan Density. Magenta
Density. Yellow Density.
Black Density
+5 to –5. Default is...

Menu itemSub-menu itemValuesDescription
OptimizeCACO3 In countries/regions where paper is expensive, this
compound is added to paper to make it less expensive
to produce. This compound makes the paper dusty,
which affects print quality.
Background1  
Background2  
Registration  
Long Paper  
Pre-rotation  
Re-transfer  
Tray 1  
Belt Contact  
Restore Optimize  
Color REt Enabled (default)
DisabledEnable or disable Resolution Enhancement
technology (REt), which produces print output with
smooth angles,...

Troubleshooting menu
Administration > Troubleshooting
NOTEMany of the menu items under the Troubleshooting menu are for advanced
troubleshooting purposes.
Table 2-17  Troubleshooting menu
Menu itemSub-menu itemSub-menu itemValuesDescription
Event Log  PrintThis shows the event codes and their
corresponding engine cycles on the control-
panel display.
Calibrate Scanner  CalibrateUse this feature to compensate for offsets in
the scanner imaging system (carriage head)
for ADF and flatbed scans.
You might...

Menu itemSub-menu itemSub-menu itemValuesDescription
Disable Cartridge
Check   Use this item to enter a mode where a
cartridge (or color pair of cartridge and drum)
can be removed to determine which particular
color is the source of a problem. In this mode,
all consumable-related errors are ignored.
Paper Path Test Test Page PrintGenerate a test page for testing the paper-
handling features. Define the path for the test
in order to test specific paper paths.
Source All trays
Tray 1
Tray 2
(Additional...

Menu itemSub-menu itemSub-menu itemValuesDescription
Finishing Paper Path
TestStaplesFinishing OptionsChoose from a list of
available options.Test the paper-handling features on the
finisher.
Select the option that you want to test.
Media SizeLetter
Legal
A4
Executive (JIS)
8.5 x 13Select the paper size for the test.
Media TypeSelect from a list of
types.Select the paper type for the test.
CopiesRange: 2-30,
Default=2Select the number of copies to include in the
test.
DuplexOff
OnSelect whether to use...

Menu itemSub-menu itemSub-menu itemValuesDescription
Component Test   Exercise individual parts independently to
isolate noise, leaking, or other issues. To start
the test, select one of the components. The
test runs the number of times specified in the
Repeat option. You might be prompted to
remove parts from the device during the test.
Press the Stop button to abort the test.
Print/Stop Test  Continuous value
from 0 to 60,000
milliseconds.
Default: 0Isolate faults by stopping the device during
the...

Resets menu
Administration > Resets
Table 2-18  Resets menu
Menu itemValuesDescription
Clear Local Address BookClearUse this feature to clear all addresses from the address books that
are stored on the device.
Clear Fax Activity LogYes
No (default)Use this feature to clear all events from the Fax Activity Log.
Restore Factory Telecom SettingRestoreUse this option to restore the following settings to their factory default
settings: Transmit Signal Loss, V34, Maximum Baud Rate, Speaker
Mode.
Restore...