HP Color LaserJet CM4730 User Manual

Media typeMedia
specificationsMedia quantityDriver settingsPaper orientationOutput
Heavy0.13 mm (0.005
in.) thickMaximum stack
height: 56 mm (2.2
in.)Light glossy,
glossy, or heavy
glossySide to be printed
on facing up 
Glossy Range:
75 g/m
2 (20 lb)
bond to 120 g/m2
(32 lb) bondMaximum stack
height: 56 mm (2.2
in.)Light glossy,
glossy, or heavy
glossySide to be printed
on facing up 
Table 9-2  Tray 2, tray 3, and tray 4 media information (continued)
ENWW Media type and tray loading 115
 

Windows printer-driver features
Create and use printing shortcuts in Windows
Use printing shortcuts to save the current driver settings for reuse. Shortcuts are available on most
printer-driver tabs. You can save up to 25 printing shortcuts.
Create a printing shortcut
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences.
3.Select the print settings that you want to use. Click Save As.
4.In the Printing Shortcuts box, type a name for the...

3.Click the Paper/Quality tab.
4.In the Special pages list box, click Print pages on different paper.
5.Click Settings.
6.Select the settings that you want to use to print specific pages on different paper. Click Add.
7.Click OK to return to the Paper/Quality tab.
8.Click OK.
NOTEThe paper size must be the same for all pages of the print job.
Print a blank first page
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences.
3.Click the...

Reduce or enlarge a document
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences.
3.On the Effects tab, next to % of Actual Size, type the percentage by which you want to reduce or
enlarge your document.
You can also use the scroll bar to adjust the percentage.
4.Click OK.
Print a document onto a different paper size
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences....

Print on both sides of the page (duplex printing)
Automatic two-sided (duplex) printing
Specify two-sided printing options in your software program or in the printer driver. If you cannot see
this option, use the following information to make the duplex printing options available.
●Verify that the printer driver is configured to show the two-sided printing options: automatic and
manual. To change or verify the configuration, click the Start button, choose Settings, and click
Printers and Faxes. Then...

Enable or disable automatic two-sided printing from the control panelIf you cannot adjust two-sided printing settings in  your software program or printer driver, adjust them
on the control panel. The factory default setting is  1-sided.
CAUTION Do not use two-sided printi ng when printing on labels. Serious damage can result.
NOTEChanging settings for two-sided printing on the MFP control panel affects all print jobs.
Whenever possible, change settings for two-sided printing through your software...

Enable or disable automatic two-sided printing in the Windows printer driver1.Insert enough paper into one of the trays to accommodate the print job.
CAUTION Do not load media that is heavier than 105 g/m2 (28 lb bond). This can jam the
MFP.
2. Open the printer driver.
3. On the  Finishing  tab, click Print on Both Sides .
4. Click  OK.
Layout options for printing on both sides The following are the four duplex orientation  options. To select option 1 or 4, select Flip Pages Up in
the printer driver....

NOTEThe default binding setting is to bind on the long edge when the page is set up for portrait
orientation. To change to long-edge binding, click the Flip Pages Up check box.
Printing booklets
Some versions of the printer driver offer booklet-printing settings. Select binding on the left or right side
on letter, legal, or A4 paper size. Windows 2000 and XP support booklet printing for all paper sizes.
Manual two-sided (duplex) printing
If you want to print on two sides (duplex) on paper other than the...

1234
1. Long-edge landscapeEvery other printed image is oriented upside-down. Facing pages are read
continuously from top to bottom.
2. Short-edge landscapeEvery printed image is oriented right-side-up. Facing pages are read from top to
bottom.
3. Long-edge portraitThis is the default setting, and the most common layout used. Every printed image
is oriented right-side-up. Facing pages are read from top to bottom.
4. Short-edge portrait Every other printed image  is oriented upside-down. Facing pages are...

3.Click the Device Settings tab.
4.On the Output tab, click the drop-down list under Staple, and click One-edge.
Configure the printer driver to recognize the optional stapler stacker
1.Open the Printers folder.
2.Select HP Color LaserJet CM4730 MFP.
3.On the File menu, click Properties.
4.Select the Device Settings tab.
5.Use either of the following methods to select the stapler/stacker:
Scroll to Automatic Configuration, select Update Now, and then click Apply.
-or-
Scroll to Accessory Output Bin,...