HP Color LaserJet CM4730 User Manual

Use the Services tab
If the product is connected to a network, use the Services tab to obtain product and supply-status
information. Click the Device and Supplies status icon to open the Device Status page of the
HP Embedded Web Server. This page shows the current status of the product, the percentage of life
remaining for each supply, and information for ordering supplies. For more information, see
Embedded Web server.
In the Internet Services area, select an option from the list to go to various...

Macintosh printer-driver features
Create and use printing shortcuts in Macintosh
Use printing shortcuts to save the current printer driver settings for reuse.
Create a printing shortcut
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences.
3.Select the print settings.
4.In the Printing Shortcuts box, click Save As..., and type a name for the shortcut.
5.Click OK.
Use printing shortcuts
1.On the File menu in the software program, click...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the File menu, click Print.
2.Open the Watermarks menu.
3.Next to Mode, select the type of watermark to use. Select Watermark to print a semi-transparent
message. Select Overlay to print a message that is not transparent.
4.Next to Pages, select whether to print the watermark on all pages or on the first page only.
5.Next to Text, select one of the standard messages, or...

To use two-sided printing:
●Verify that the printer driver is configured to show the two-sided printing options: automatic and
manual.
●After the two-sided printing option appears, select the appropriate settings in the printer-driver
software, including the page and binding orientation.
●Automatic two-sided printing is not supported for certain media types:
●Transparencies
●Envelopes
●Labels
●Heavy, extra heavy, cardstock, and HP Tough paper
The maximum weight paper for automatic duplex printing is 120...

Enable or disable automatic two-sided printing from the control panelIf you cannot adjust two-sided printi ng settings in your software program or printer driver, adjust them
on the control panel. The factory default setting is  1-sided.
CAUTION Do not use two-sided printing when printing on labels. Serious damage can result.
NOTEChanging settings for two-sided printing on t he MFP control panel affects all print jobs.
Whenever possible, change settings for two-side d printing through your software...

Enable or disable automatic two-sided printing in the Macintosh printer driver
Use automatic duplex printing 1.Insert enough paper into one of the trays to acco mmodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
● For all other trays, load the letterhead paper fa
ce-down with the top edge at the back of the
tray.
2. Open the printer driver...

Options for binding two-sided printing jobs
Before printing a two-sided document, use the printer driver to select the binding. Long-edge or book
binding is the conventional layout used in book binding. Short-edge or tablet binding is the typical
calendar binding.
NOTEThe default binding setting is to bind on the long edge when the page is set up for portrait
orientation. To change to long-edge binding, click the Flip Pages Up check box.
Manual duplex printing
Print on both sides manually
1.Insert enough...

4.Select the Installable Options tab.
5.Scroll to Accessory Output Bins and select HP 500 sheet stapler/stacker or HP 700 sheet 3-
bin Mailbox.
6.Click Apply Changes.
Set the color options
Use the Color Options pop-up menu to control how colors are interpreted and printed from software
programs.
1.On the File menu in the software program, click Print.
2.Select the driver, and then click Properties or Preferences.
3.Open the Color Options pop-up menu.
4.If you are using Mac OS X, click Show Advanced...

Staple documents
The optional stapler/stacker has the following specifications:
●It can staple jobs of up to 30 sheets of 75 g/m
2 (20 lb) paper.
●It can staple letter-size, A4-size, legal-size paper, Executive (JIS), and 8.5 x 13.
●It can stack up to 500 sheets of paper.
●Paper weight can range from 60 to 120 g/m
2 (16 to 32 lb).
●If the job consists of only one sheet or more than 30 sheets, the MFP will print the job to the bin,
but will not staple the job.
●It supports paper only. Do not try to staple...

Set the stapler at the control panel for a single copy job
NOTEThe following procedure sets the stapling  option for only the current copy job.
1.Scroll to and touch  Copy.
2. Touch  Staple/Collate .
3. Touch the staple option you want to use.
Configure the device to stop  or continue when the staple cartridge is empty
You can specify whether the MFP stops printing when  the staple cartridge is empty or if it continues
printing but does not staple the jobs.
1. Scroll to and touch  Administration.
2....