HP Color LaserJet CM2320nf User Manual

PCL5
Use these options to configure the settings when you are using the PCL print personality.
NOTE:You must click  Apply before your changes take effect.
PostScript
Use this option when you are using the PostScript print personality. When the  Print PostScript error
option is turned on, the PostScript error page automatically prints when PostScript errors occur.
NOTE: You must click  Apply before your changes take effect.
Network Settings
The network administrator can use this tab to control the...

Embedded Web server
This product is equipped with an embedded Web server (EWS), which provides access to information
about product and network activities. A Web server provides an environment in which web programs
may run, much in the same way that an operating system, such as Windows, provides an environment
for programs to run on a computer. The output from these programs can then be displayed by a Web
browser, such as Microsoft Internet Explorer, Safari, or Netscape Navigator.
An “embedded” Web...

Use HP Web Jetadmin software
HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and
troubleshooting network-connected peripherals. The intuitive browser interface simplifies cross-platform
management of a wide range of devices, including HP and non-HP devices. Management is proactive,
allowing network administrators the ability to resolve issues before users are affected. Download this
free, enhanced-management software at 
www.hp.com/go/webjetadmin_software. 
To...

Turn on private receive feature
The password-protection feature must be turned on before the private-receive feature can be activated.
1.On the control panel, press  Setup.
2. Use the arrow buttons to select  Fax setup, and then press  OK.
3. Use the arrow buttons to select  Advanced setup, and then press OK.
4. Use the arrow buttons to select  Private receive, and then press  OK.
5. Use the arrow buttons to select  On, and then press  OK.
6. Use the alphanumeric buttons to enter the product security...

Manage supplies
Check and order supplies
You can check the supplies status by using the product control panel, printing a supplies status page,
or viewing HP ToolboxFX. Hewlett-Packard recommends that you place an order for a replacement print
cartridge when Low message for a print cartridge first appears. Use a new, authentic HP print cartridge
to obtain the following types of supplies information:
●Amount of cartridge life remaining
● Approximate number of pages remaining
● Number of pages printed
●...

Store supplies
Follow these guidelines for storing print cartridges:
●Do not remove the print cartridge from its package until you are ready to use it.
CAUTION:
To prevent damage, do not expose the print cartridge to light for more than a few
minutes.
● See Environmental specifications on page 255
 for operating and storage temperature ranges.
● Store the supply in a horizontal position.
● Store the supply in a dark, dry location away from heat and magnetic sources.
HP policy on non-HP supplies...

Replace supplies
Print cartridge
1Cartridge E-label
2Plastic shield
3Imaging Drum. Do not touch the imaging drum on the bottom of the print cartridge. Fingerprints on the imaging drum can
cause print-quality problems.
1.Open the front door.
ENWW Manage supplies 185
 

2.Pull out the print-cartridge drawer.
3.Grasp the handle on the old print cartridge and then pull the cartridge straight up to remove it.
4.Remove the new print cartridge from the packaging.
186 Chapter 14   Manage and maintain the product ENWW
 

5.Remove the orange, plastic shield from the bottom of the new print cartridge.
CAUTION: Do not touch the imaging drum on the bottom of the print cartridge. Fingerprints on
the imaging drum can cause print-quality problems.
6. Insert the new print cartridge into the product.
7.Pull the tab on the left side of the print cartridge straight up to completely remove the sealing tape.
Discard the sealing tape.
ENWW Manage supplies 187
 

8.Close the print-cartridge drawer.
9.Close the front door.
10.Place the old print cartridge in the box for the new print cartridge. Follow the recycling instructions
that are included in the box.
CAUTION: If toner gets on any clothing, wipe it off with a dry cloth and wash the clothing in cold water.
Hot water sets toner into the fabric .
Memory DIMMs
Information
The product comes with 160 MB of RAM. The product also has one DIMM slot that can be used to add
a 64 MB or 128 MB DIMM. Some available RAM...