HP Color LaserJet CM1312 User Manual

13 Photo
NOTE:This section applies only to the HP LaserJet CM1312 (fax/photo-card model) product.
●Insert a memory card
●
Change memory card default settings
●
Print photos directly from the memory card
●
Print a memory card thumbnail sheet
●
Print and scan photos from a proof sheet
ENWW149
 

Insert a memory card
The HP LaserJet CM1312 (fax/photo-card model) product can read the following memory-card types:
●CompactFlash (CF) Type 1 and Type 2
●Memory Stick, Memory Stick PRO, and Memory Stick Duo
●MultiMedia Card (MMC)
●Secure Digital (SD)
●xD Picture Card
The HP LaserJet CM1312 (fax/photo-card model) memory card reader recognizes only the .JPEG file
format when printing from the product control panel. To print other file types, you must do one of the
following:
●Use the software, such as...

Insert and remove a memory card
NOTE:The HP LaserJet CM1312 (fax/photo-card model) recognizes memory cards up to 2 GB.
1.Push the memory card into the appropriate memory slot to seat it.
NOTE:You can use only one memory card in the product at a time. If two or more are inserted,
the product displays an error message.
2.The product reads the card, and then the product control panel displays X photos found on
card, where X is the number of recognized .JPEG files found on the memory card.
After a few...

3.Grasp the card and gently pull it straight out of the memory card slot to remove it.
CAUTION:To avoid damaging the files stored on the card, do not remove a memory card while
the product is accessing it. Wait for the LED near the memory card slots to stop blinking before
you remove the memory card. When the LED remains illuminated, it is safe to remove the memory
card.
152 Chapter 13   PhotoENWW
 

Change memory card default settings
The HP LaserJet CM1312 (fax/photo-card model) product comes with default settings that you can
change for photo printing from the product control panel.
NOTE:The default settings remain as selected until you change and save them again. If you want to
change the settings temporarily for a particular photo-printing job, see 
Print photos directly from the
memory card on page 154.
1.Press Setup.
2.Use the arrow buttons to select Photo setup, and then press OK.
3.Use the...

Print photos directly from the memory card
Use the control panel to print directly from a memory card and to change the settings for a print job.
Print individual photos from the memory card
1.Insert the memory card into the product. The Photo Menu displays.
2.Use the arrow buttons to select Easy Print and then press OK.
3.Use the arrow buttons to select Individual photo and then press OK.
4.Use the arrow buttons or numeric keypad to make selections for each of the following menu items,
and then press...

Print all of the photos from the memory card
1.Insert the memory card into the product. The Photo Menu displays.
2.Use the arrow buttons to select Easy Print, and then press OK.
3.Use the arrow buttons to select All photos (# - #), and then press OK.
4.Use the arrow buttons to make selections for each of the following menu items, and then press
OK.
●Select image size: Set the size for the printed image.
●Select paper size: Select the media size.
●Select paper type: Select the media type.
●Number of...

Print and scan photos from a proof sheet
Preview images and print photos from a proof sheet. A proof sheet can contain as many as 20 images.
This feature has been optimized and tested for use with Genuine HP Toner Supplies.
1.Insert the memory card into the product. The Photo Menu displays.
2.Use the arrow buttons to select Options and then press OK.
3.Use the arrow buttons to select Proof Sheet and then press OK.
4.Use the arrow buttons to select Print proof sheet and then press OK.
5.If more than 20...

14 Manage and maintain the product
●Information pages
●
HP ToolboxFX
●
Embedded Web server
●
Use HP Web Jetadmin software
●
Security features
●
Manage supplies
ENWW157
 

Information pages
Information pages reside within the product memory. These pages help diagnose and solve problems
with the product.
NOTE:If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System setup menu on the control panel or the embedded Web server. See 
Control panel
on page 7.
Page descriptionHow to print the page
Configuration page
Shows the current...