HP Color LaserJet CM1312 User Manual

Define custom copy settings
When you change the copy settings at the control panel, Custom settings appears on the control-panel
display. The custom settings remain in effect for approximately 2 minutes, and then the product returns
to the default settings. To immediately return to the default settings, press Cancel.
Print or copy edge-to-edge
The product cannot print fully edge-to-edge. The maximum printing area is 203.2 x 347 mm (8 x 13.7 in),
leaving a 4 mm unprintable border around the page....

Change the default media-type setting
1.On the product control panel, press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select Paper setup, and then press OK.
4.Use the arrow buttons to select Default paper type, and then press OK.
5.Use the arrow buttons to select a media type, and then press OK.
6.Press OK to save the selection.
Restore the copy-settings defaults
Use the control panel to restore the copy settings to the factory-set default...

2.Gently close the lid.
3.Gently press down on the lid to press the book to the flatbed scanner surface.
CAUTION:Pressing on the flatbed cover with too much force can break the lid hinges.
4.Press Start Copy Black or Start Copy Color.
Copy photos
ENWWCopy photos 81
 

NOTE:Photographs should be copied from the product flatbed scanner, not from the automatic
document feeder (ADF).
1.Place the photo on the flatbed scanner, picture-side down at the corner indicated by the icon on
the scanner.
2.Gently close the lid.
3.Adjust the copy quality settings on the product as desired for photo printing.
4.Press Start Copy.
82 Chapter 9   CopyENWW
 

Copy mixed-size originals
Use the flatbed scanner when making copies of mixed-size originals. Do not use the ADF.
Duplex (two-sided) copy jobs
Copy two-sided documents manually
Set the multiple-page flatbed copy setting
The multiple-page flatbed copy setting must be set to On before the product will produce two-sided
copies from the flatbed scanner.
1.On the product control panel, press Setup.
2.Use the arrow buttons to select Copy setup, and then press OK.
3.Press OK to select Default Multi-page.
4.Use...

84 Chapter 9   CopyENWW
 

10 Color for Windows
●Manage color
●
Match colors
●
Advanced color use
ENWW85
 

Manage color
Manage color by changing the settings on the Color tab in the printer driver.
Automatic
Setting color options to Automatic typically produces the best possible print quality for color documents.
The Automatic color adjustment option optimizes the neutral-gray color treatment, halftones, and edge
enhancements for each element in a document. For more information, see your printer driver online
Help.
NOTE:Automatic is the default setting and is recommended for printing all color documents....

Setting descriptionSetting options
Neutral Grays
The Neutral Grays setting determines the method for
creating gray colors used in text, graphics, and
photographs.●Black Only generates neutral colors (grays and black) by using
only black toner. This guarantees neutral colors without a color
cast. This setting is best for documents and grayscale viewgraphs.
●4-Color generates neutral colors (grays and black) by combining
all four toner colors. This method produces smoother gradients
and transitions to...

Match colors
For most users, the best method for matching colors is to print sRGB colors.
The process of matching printer output color to your computer screen is complex, because printers and
computer monitors use different methods of producing color. Monitors display colors by using light pixels
that use an RGB (red, green, blue) color process, but printers print colors by using a CMYK (cyan,
magenta, yellow, and black) process.
Several factors can influence your ability to match printed colors to those...