HP Color LaserJet CM1312 User Manual

How do ISteps to perform
Select advanced printing optionsIn any of the sections, click a current setting to activate a drop-
down list so you can change the setting.
Change the number of copies that are printed
NOTE:If the software program that you are using does not
provide a way to print a particular number of copies, you can
change the number of copies in the driver.
Changing this setting affects the number of copies for all print
jobs. After your job has printed, restore this setting to the
original...

70 Chapter 8   Print tasksENWW
 

9 Copy
●Load originals
●
Use copy
●
Copy settings
●
Copy a book (photo card models only)
●
Copy photos
●
Copy mixed-size originals
●
Duplex (two-sided) copy jobs
ENWW71
 

Load originals
Automatic document feeder (ADF models only)
NOTE:The ADF capacity is up to 50 sheets of 80 g/m2 or 20 lb media.
CAUTION:To prevent damage to the product, do not use an original that contains correction tape,
correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals
into the ADF. Use the flatbed glass to scan these items.
1.Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-up
and the first...

3.Adjust the media guides until they are snug against the media without restricting movement.
Flatbed scanner
NOTE:The maximum media size for flatbed scanning is letter. Use the ADF for scanning media larger
than letter.
1.Make sure that the automatic document feeder (ADF) contains no media.
2.Lift the flatbed scanner cover.
3.Place the original document face-down on the flatbed scanner with the upper-left corner of the
document at the corner indicated by the icon on the scanner.
4.Gently close the lid....

Use copy
One-touch copy
1.Load the document into the automatic document feeder (ADF) input tray or onto the flatbed
scanner.
2.Press Start Copy Black or Start Copy Color on the product control panel to start copying.
3.Repeat the process for each copy.
Multiple copies
You can choose to have the default number of copies be any number from 1 to 99.
Change the number of copies for the current job
1.On the product control panel, press Number of copies (HP LaserJet CM1312 mfp), or the Copy
Menu button (HP...

Reduce or enlarge copies
Reduce or enlarge copies for the current job
1.On the product control panel, press Copy Features.
-or-
On products with a graphic display, press Copy Menu.
2.On the product control panel, press Reduce/Enlarge.
-or-
On products with a graphic display, press Size.
3.Select the size to which you would like to reduce or enlarge the copies in this job.
NOTE:If you select Custom: 25 to 400%, type a percentage by using the alphanumeric buttons.
If you select 2 pages per sheet or 4 pages...

●Legal to A4=83%
●A4 to Letter=94%
●Letter to A4=97%
●Full Page=91%
●Fit to page
●2 pages per sheet
●4 pages per sheet
●Custom: 25 to 400%
NOTE:When using the Fit to page setting, copy from the flatbed scanner only.
When using the 2 pages per sheet or 4 pages per sheet setting, copy from the automatic document
feeder only. Also, after selecting the 2 pages per sheet or 4 pages per sheet option, you must select
the page orientation (portrait or landscape).
Change the copy-collation setting
You can set the...

3.Use the arrow buttons to select Default Collation, and then press OK.
4.Use the arrow buttons to select On or Off.
5.Press OK to save the selection.
NOTE:The factory-set default for automatic copy collation is On.
Color copies or black and white copies (Mono)
1.On the product control panel, press Setup, and then press OK.
2.Use the arrow buttons to select Copy setup, and then press OK
3.Use the arrow buttons to select Advanced, and then press OK
4.Use the arrow buttons to select Color Copy, and then...

Adjust the default copy quality
1.On the product control panel, press Setup.
2.Use the arrow buttons to select Copy setup, and then press OK.
3.Use the arrow buttons to select Default Optimize, and then press OK.
4.Use the arrow buttons to select the copy quality, and then press OK to save the selection.
Clean the scanner glass
Dirt, fingerprints, smudges, hair and other marks on the scanner glass slows scanner performance and
affects the accuracy of special features such as fit-to-page and copy. To...