HP Color LaserJet CM1312 User Manual

Use features in the Macintosh printer driver
Print
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset
1.On the File menu, click Print.
2.Select the driver.
3.Select the print settings.
4.In the Presets box, click Save As..., and type a name for the preset.
5.Click OK.
Use printing presets
1.On the File menu, click Print.
2.Select the driver.
3.In the Presets box, select the printing preset that you want to...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the File menu, click Print.
2.Open the Watermarks menu.
3.Next to Mode, select the type of watermark to use. Select Watermark to print a semi-transparent
message. Select Overlay to print a message that is not transparent.
4.Next to Pages, select whether to print the watermark on all pages or on the first page only.
5.Next to Text, select one of the standard messages, or...

Print on both sides of the page (duplex printing)
Use automatic duplex printing
1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
●For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
2.On the File menu, click Print.
3.Open the Layout pop-up...

Scanning tasks
To scan to a software program, scan an item using the program itself. Any TWAIN-compliant program
can scan an image. If the program is not TWAIN-compliant, save the scanned image to a file then place,
open, or import the file in the software program.
Use page-by-page scanning
1.Lift the flatbed scanner lid and load the original that is to be scanned face-down on the flatbed
scanner with the upper-left corner of the document at the lower-right corner of the glass. Gently
close the lid....

Photo
In HP Director, click the Photo icon to launch the Photosmart Studio software. Use the software to import
photos from a memory card, edit photos, and print photos from the PC.
ENWW Use features in the Macintosh printer driver 43
 

44 Chapter 4   Use the product with Macintosh ENWW
 

5 Connectivity
●Supported network operating systems
●
USB connection
●
Printer sharing disclaimer
●
Supported network protocols (HP LaserJet CM1312 (fax/photo-card model) only)
●
Install the product on a network (HP LaserJet CM1312 (fax/photo-card model) only)
●
Configure the network product (HP LaserJet CM1312 (fax/photo-card model) only)
NOTE:Configuring TCP/IP settings is complicated and should be performed only by experienced
network administrators. BOOTP will require a server to configure specific...

Supported network operating systems
The following operating systems support network printing:
Full software installation
●Windows XP (32-bit)
●Windows Vista (32-bit and 64-bit)
●Mac OS X v10.3, v10.4, and later
Print and scan driver
●Windows XP (64-bit)
●Windows 2000
●Windows 2003 Server (32-bit and
64-bit)
Printer driver only
●Linux (Web only)
●UNIX model scripts (Web only)
USB connection
NOTE:Do not connect the USB cable before installing the software. The installation program will notify
you when the...

Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at 
www.microsoft.com.
Supported network protocols (HP LaserJet CM1312 (fax/
photo-card model) only)
The product supports the TCP/IP network protocol. It is the most widely used and accepted networking
protocol. Many networking services utilize this protocol. This product also supports IPv4 and IPv6. The
following tables...

Service nameDescription
BOOTP (bootstrap protocol)For Automatic IP address assignment. BOOTP server
provides the product with an IP address. Requires
administrator to input the product MAC hardware address on
BOOTP server in order for product to obtain an IP address from
that server.
Auto IP For Automatic IP address assignment. If neither a DHCP
server nor a BOOTP server is present, this service allows the
product to generate a unique IP address.
Install the product on a network (HP LaserJet CM1312...