HP Color LaserJet CM1015 User Manual

2.Carefully grasp the jammed paper by both corners and pull slowly to remove the paper.
3.Close the front door.
ENWW Clear paper jams 197
 

Clear jams from tray output area
CAUTIONJams in these areas might result in loose toner on the page. If toner gets on clothes
or hands, wash them in cold water. (Hot water sets the toner into the fabric.)
1. Carefully grasp the jammed paper by both corners and pull slowly to remove the paper from the
top bin.
2.Open and close the front door.
198 Chapter 14   Problem solving ENWW
 

Clear jams from the back of the MFP
1.Open the back cover.
2.Remove any jammed paper.
ENWW Clear paper jams 199
 

3.Close the back cover.
Clear jams from tray 2 or optional tray 3
NOTE Before attempting to clear jams from tray 2 or optional tray 3, remove any jams inside
the MFP.
1. Pull tray 2 or optional tray 3 out of the MFP.
2.Carefully grasp the jammed paper by both corners and pull slowly to remove the paper.
200 Chapter 14   Problem solving ENWW
 

3.Slide the tray into the MFP.
4.Open and close the front door.
ENWW Clear paper jams 201
 

Additional problem solving tools
The section describes the tools that can help solve problems with the MFP.
Device pages and reports
This section describes the pages and reports that help diagnose and solve MFP problems.
Demo page
To verify that the MFP is functioning properly, print a Demo page. For more information about the Demo
page, see 
Demo page.
Configuration page
The Configuration page lists the current settings and properties of the MFP. Use this page to check for
color plane registration and...

To restore the factory-set defaults
1.Press Menu.
2.Press the navigation arrows to select Service, then press OK.
3.Press the navigation arrows to select Restore defaults, then press OK.
The MFP automatically restarts.
Clean the paper path
The MFP features a special cleaning mode to clean the paper path.
NOTEIf you have access to HP ToolboxFX, HP recommends cleaning the paper path by
using HP ToolboxFX.
To clean the paper path
1.Press Menu.
2.Press the navigation arrows to select Service, then press OK....

204 Chapter 14   Problem solving ENWW
 

15 Work with memory
This section provides information about the following topics:
●
MFP memory
●
Install memory DIMMs
●
Check DIMM installation
●
Enable memory
ENWW205
 

MFP memory
The HP Color LaserJet CM1015/CM1017 MFP has one dual inline memory module (DIMM) slot for
upgrading the MFP capabilities with the following options:
●More MFP memory. DIMMs are available in 64 MB, 128 MB, and 256 MB for a maximum of 354 MB.
●DIMM-based macros, and patterns
Consider adding more memory to the MFP if print jobs often include complex graphics or HP PostScript
Level 3 documents, or use many downloaded fonts. Additional memory also allows the MFP to print
multiple, collated copies...