HP Color LaserJet CM1015 User Manual

C Specifications
This section contains information about MFP specifications.
●
Multifunction peripheral (MFP) specifications
ENWW227
 

Multifunction peripheral (MFP) specifications
Table C-1  Physical Specifications
SpecificationsHP Color LaserJet CM1015 MFPHP Color LaserJet CM1017
MFP
Device weight (without cartridges)19.4 kg (42.75 lb)19.6 kg (43.2 lb)
Device weight, including 4
cartridges22 kg (48.5 lb)22.2 kg (48.9 lb)
Device height, desktop to top of
fully tilted display1525 mm (20.7 in)540 mm (21.3 in)
Device height, desktop to top of
scanner cover with display folded
down490 mm (19.3 in)490 mm (19.3 in)
Device height, desktop to...

Table C-4  Power consumption (average, in watts)1
Product
modelPrinting (Color)2Printing (Black and
White)2Copying2Ready2Power SaveOff
HP Color
LaserJet
CM1015 MFP200 W190 W150 W18 W18 W0 W
HP Color
LaserJet
CM1017 MFP200 W190 W150 W18 W18 W0 W
1Values subject to change, see http://www.hp.com/support/cljCM1015_CM1017  for current information.2Power reported is highest values measured for color and  monochrome printing/copying using all standard voltages.3Default time from Ready Mode to Power Save = 0...

CategorySpecifications
Curl in reamFlat within 5 mm (0.2 inch)
Cut-edge conditionsCut with sharp blades with no visible fray
Fusing compatibilityMust not scorch, melt, offset, or release hazardous emissions
when heated to 210°C (410°F) for 0.1 second
GrainLong Grain
Moisture content4% to 6% by weight
Smoothness 100 to 250 Sheffield
For complete print media specifications for all HP LaserJet Printers, see the HP LaserJet PrinterFamily
Print Media Guide. To download the guide in PDF format, go to...

D Regulatory information
This section contains the following information:
●
Introduction
●
FCC regulations
●
Environmental Product Stewardship program
●
Declaration of conformity
●
Country/region-specific safety statements
ENWW231
 

Introduction
This section contains the following regulatory information:
●
FCC regulations
●
Environmental Product Stewardship program
●
Service and support
●
Declaration of conformity
●
Laser safety statement
●
Canadian DOC statement
●
Korean EMI statement
●
VCCI statement (Japan)
●
Finnish laser statement
232 Appendix D   Regulatory information ENWW
 

FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If this equipment is not installed and used in accordance with the instructions, it can
cause harmful interference to radio communications. However, there is no...

Environmental Product Stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in sleep mode, which saves natural resources and saves money
without affecting the high performance of this...

HP Printing Supplies Returns and Recycling Program Information
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge. In 2004, HP Planet
Partners for LaserJet Supplies was available in 85% of the world market where HP LaserJet supplies
are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most
HP LaserJet print cartridge boxes. Labels and bulk boxes are also available through the Web site:
http://www.hp.com/recycle.
Use the label to...

Disposal of waste equipment by users in private households in the
European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve...