HP CM8060 User Manual

Uninstall the software
Windows
Follow these steps to uninstall the device by using the Uninstall component on the printing-system CD
for the Windows operating system.
1. Quit all open programs.
2. Insert the printing-system CD into the CD-ROM drive.
NOTE: If the CD-ROM does not star t automatically, right-click Start, click  Explore , and then
browse to and click the SETUP.EXE file  in the root directory of the CD.
3.Click  Modify Installation , and then follow the onscreen prompts.
Macintosh
Follow...

Installer Customization Wizard for Windows
System administrators can use the Installer Customization Wizard to customize a silent, unattended
device installer by pre-setting the in stallation options in a response file.
NOTE:For detailed information about the  Installer Customization Wizard, see the HP Driver
Preconfiguration Support Guide , which is available on the Administrator CD.
Run the Installer Customization Wizard
Start the Installer Custom ization Wizard from the software installation  CD. It...

Language dialog box
NOTE:The customized installer limits all system insta llations of the device to the language that is
selected in the  Language dialog box. Maintenance mode on  systems where installation has been
completed by using the customized installer does not provide options for changing the language. To
change the language on a system that used an Installer Customization Wizard installation, the
customized installation must be uninstalled, and a ne w device must be installed in order to...

define the method for identifying the device to be installed. Select one of the following options to
use the default port name or to specify a different port name.
Select 
IP Address  to make the field available for typing the TCP/IP address for the device.
Only numerals are a llowed in this field. If this option is  selected, you must type at least one
digit in the  IP Address  field to prevent an error message from appearing that prompts you for
a valid IP address.
 Select 
IP Hostname  to make the...

Driver Configuration dialog box
The Driver Configuration  dialog box contains two selectio ns. Complete one of the options.
● Select 
Yes, allow me to c onfigure the drivers  and click Next. Another  Driver Configuration
dialog box appears.
 Click the 
Printing Preferences  tab. Scroll through the list and select the settings for the
custom installation file.
 Click the 
Device Settings  tab. Select the settings for the custom installation file, and then
click  Next. The  Additional Software  dialog...

Click Next to begin the process of copy ing and installing the printing- system software folders and files
to create the custom installer. The  Installing dialog box appears. This dialog box stays on the screen
until the status bar fills.
NOTE: During installation,  several files, including system files, ar e placed at the root of the directory
that appears in the  Location field. Be sure that enough space is available in the directory before
continuing.
Installing dialog box
Click  Cancel  to close the...

4 Configure device settings
This chapter contains information about the following topics:
●
Where to configure settings
●
Configure device settings at the control panel
●
Configure device settings remotely
ENWW 33
 

Where to configure settings
Some device settings must be set up at the device control panel, but other settings must be set up
remotely by using the embedded Web server (EWS)  or HP Web Jetadmin (WJA) software. Perform the
setup at the device before performing the remote se tup procedures. The following table indicates which
settings to configure at the device and which to configure remotely.
Table 4-1   Where to configure settings
Device FeatureSetting to configureSet up at the
control panelSet up...

Device FeatureSetting to configureSet up at the
control panelSet up
remotelyLink for more information
FaxBasic fax settingsXXControl panel setup: Initial fax
setup on page 38
Fax printing scheduleX Time/Scheduling menuon page 129
Default job options for incoming
fax jobsXXControl panel setup: Default Job
Options menu on page 115
Fax send settings XFax send setup on page 52
Internet fax settings XInternet Fax setup on page 53
LAN fax settings XLAN Fax setup on page 52
Import fax speed dials from a...

Device FeatureSetting to configureSet up at the
control panelSet up
remotelyLink for more information
General device settingsDate and timeXXControl panel setup: Time/
Scheduling menu on page 129
Remote setup: 
Set the date and
time on page 100
Sleep delay and sleep scheduleXXControl panel setup: Time/
Scheduling menu on page 129
Remote setup: 
Set up a sleep
schedule on page 102
Enable  Sleep ModeXXControl panel setup:Management menu
on page 131
Remote setup: 
Set up a sleepschedule on page 102
Display...