HP CM8060 User Manual

Back view (right side)
1Master power switch
2 Power connection
WARNING!Do not use the master power switch or unp lug the device unless you have already turned
the device off by using the on/off button on the contro l panel. If you use the master power switch to turn
off the device, wait for the amber LED to turn dark before you turn the switch on again.
Back view (left side)
The following figure shows the interface ports for the device.
1 Boot Codes LCD monitor (for service use only)
ENWW Product...

2Host USB (for connecting an accessory to the device)
3Fax (RJ-11) (covered with label)
4Embedded LAN (RJ-45) (no telecommunication connections)
5CAN Interface (Finisher)
6Engine Interface (PCI Express)
7Scanner Interface
8EIO Slot
9FIH (Foreign Interface Harness)
10Device USB (for connecting the device to a computer)
11Status LEDs for (service use only)
12 Engine Power Control (Serial)
Single output bin
1 Single output bin
8 Chapter 1   IntroductionENWW
 

Optional finishers
By default, when an optional finisher is installed, all copy jobs are sent to Output Bin 1, print jobs are
sent to Output Bin 2, and fax jobs are sent to Ou tput Bin 3. The system administrator can change these
default settings.
Optional HP 4-Bin Job Separator
1Output Bin 1 (Copy jobs)
2Output Bin 2 (Print jobs)
3Output Bin 3 (Fax jobs)
4 Output Bin 4
ENWW Product walkaround 9
 

Optional HP Multifunction Finisher
1Output Bin 1 (Copy jobs)
2Output Bin 2 (Print jobs)
3Output Bin 3 (Fax jobs)
4Output Bin 4
5Output Bin 5 (all stapled jobs are delivered to Output Bin 5)
6Stapler 2
7 Stapler 1
10 Chapter 1   Introduction ENWW
 

Turn the device on and off
To turn the device on and off, press the on/off button on the device control panel.
WARNING!Do not use the master power switch or unp lug the device unless you have already turned
the device off by using the on/off button on the control panel.
ENWW Turn the device on and off 11
 

Use the control panel
The control panel has a full-color VGA touchscreen that provides easy access to all device functions.
Use the buttons and numeric keypad to control jobs an d the device status. The LED lights indicate overall
device status.
Control-panel layout
1On/off buttonTurn the device on and off.
2TouchscreenSelect and use all device features.
3Numeric keypadSpecify the quantity for copies and other numeric information.
4Interrupt  buttonPause the device so you can insert a  new job into the...

Home screen
The Home screen provides access to the device features, and it indicates the current status of the
device.
NOTE: Depending on how the system administrator ha s configured the device, the features that
appear on the Home screen can vary. To use  some features, you might need to sign in.
HP CM8060 Color MFP with Edgeline Technology
1342
5
678
1Device status lineProvides information about the overall device status. Various buttons appear in
this area, depending on the current status. For a...

6Sign In or Sign OutYou might be required to sign in to use features for which the system
administrator has controlled access. T hese features have a lock symbol (
)
next to them. Depending on your permissions, if you have signed in, you still
might not have access to some features.
NOTE: The lock symbol appears after you have signed in. The device
administrator can access all of the dev ice features, except the Service menu.
Touch  Sign In  to open a virtual keyboard so you can type your user name and...

Buttons on the touchscreen
Various buttons can appear on the touchscreen.
Home button. Touch this button to go to the Home screen from any other screen.
Start button. Touch this button to begin the action for the feature that you are using. 
NOTE: The name of this button changes for each feature. For example, in the  Copy feature, the button
is named  Start Copy .
Information button . This button appears when two or more settings are in conflict. Touch the button to
learn how to resolve the conflict....

16 Chapter 1   IntroductionENWW