HP C4280 User Manual

If you need to contact HP support, do the following before you call:
1.Make sure that:
a. The HP All-in-One is plugged in and turned on.
b . The specified print cartridges are installed correctly.
c . The recommended paper is properly loaded in the input tray.
2. Reset the HP All-in-One:
a. Turn off the HP All-in-One by pressing the  On button.
b . Unplug the power cord from the back of the HP All-in-One.
c . Plug the power cord back  into the HP All-in-One.
d . Turn on the HP All-in-One by pressing the...

•Messages that appear when the situation occurs
• Answers to these questions:
• Has this situation happened before?
• Can you re-create it?
• Did you add any new hardware or software to your computer at about the time that this
situation began?
• Did anything else occur prior to this situat ion (such as a thunderstorm, HP All-in-One was
moved, etc.)?
After the phone support period
After the phone support period, help is available from  HP at an additional cost. Help may also be
available at the HP...

Call HP Korea customer support
Prepare the HP All-in-One for shipment
If after contacting HP Customer Support or returning to the point of purchase you are requested to
send the HP All-in-One in for service, make sure you remove and keep the following items before
returning your device:
• The print cartridges
• The power cord, USB cable, and any other  cable connected to the HP All-in-One
• Any paper loaded in the input tray
• Any originals loaded in the HP All-in-One
To remove print cartridges before...

To pack the HP All-in-One
1.If available, pack the HP All-in-One for shipment  by using the original packing materials or the
packaging materials that came with your exchange device.
If you do not have the original packaging ma terials, please use other adequate packaging
materials. Shipping damage caused by improp er packaging and/or improper transportation is
not covered under the warranty.
2. Place the return shipping label on the outside of the box.
3. Include the following items in the box:
• A...

Chapter 14
142 HP warranty and support
HP warranty and support
 

15 Technical information
Environmental standards and international regulatory information for the HP All-in-One are provided
in this section.
This section contains  the following topics:
•
Environmental product stewardship program
•
Regulatory notices
Environmental product stewardship program
Hewlett-Packard is committed to providing qua lity products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while...

Energy consumption
This product is designed to reduce power consumption and save natural resources without
compromising product performance. It has been desi gned to reduce total energy consumption both
during operation and when the device is not active . Specific information on power consumption may
be found in the product specifications.
Chapter 15
144 Technical information
Technical information
 

Disposal of Waste Equipment by Users in Private Households in the European
Union
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this produ\σct must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of ywaste equipment by handing it over to a designated collection point for \σthe recycling of waste electrical and electronic equipment. The separate collection and...

Regulatory notices
The HP All-in-One meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
Regulatory model identification number
•
FCC statement
•
Notice to users in Australia
•
Notice to users in Korea
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about power cord
•
Geräuschemission
•
Declaration of conformity (European Economic Area)
•
HP Photosmart C4200 All-in-One series declaration of...

Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about power cord
Geräuschemission
Declaration of conformity (European Economic Area)
The Declaration of Conformity in this document complies with ISO/IEC Guide 22 and EN 45014. It
identifies the product, manufacturer’s name and addr ess, and applicable specifications recognized
in the European community.
Regulatory notices 147
Technical information