HP 8610 E Owners Manual

Figure B-1  Back view of the printer
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapte r provided for your country/
region.
To set up the printer with a separate fax line
1.Using the phone cord supplied in the box with the printer, conn ect one end to your telephone
wall jack, then connect the oth er end to the port labeled 1-LINE on the back of the printer.
NOTE:You might need to...

Figure B-2  Back view of the printer
1 Telephone wall jack
2 DSL (or ADSL) filter and cord supplied by your DSL provider
3 Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapte r provided for your country/
region.
To set up the printer with DSL
1.Obtain a DSL filter from your DSL provider.
2. Using the phone cord  supplied in the box with the printer, connect one end to the open port on
the DSL filter, and...

NOTE:Some ISDN systems allow you to configure the ports for specific  phone equipment. For
example, you might have assigned  one port for telephone and Group 3 fax and another port for
multiple purposes. If you have p roblems when connected to the f ax/phone port of your ISDN
converter, try using  the port designated for multiple purposes;  it might be labeled "multi-combi"
or something similar.
● If you are using a PBX phone system, set the call waiting tone 
to "off."
NOTE:Many digital...

To set up the printer with a distinctive ring service1.Using the phone cord supplied in the box with the printer, conn ect one end to your telephone
wall jack, then connect the oth er end to the port labeled 1-LINE on the back of the printer.
NOTE:You might need to connect the supplied phone cord to the adapte r provided for your
country/region.
If you do not use the supplied cord to connect from the telepho ne wall jack to the printer, you
might not be able to fax successf ully. This special phone cord...

2Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapte r provided for your country/
region.
3 Telephone (optional)
To set up the printer with a shared voice/fax line
1.Using the phone cord supplied in the box with the printer, conn ect one end to your telephone
wall jack, then connect the oth er end to the port labeled 1-LINE on the back of the printer.
NOTE:You might need to connect the supplied phone cord...

Figure B-5  Back view of the printer
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapte r provided for your country/
region.
To set up the printer with voice mail
1.Using the phone cord supplied in the box with the printer, conn ect one end to your telephone
wall jack, then connect the oth er end to the port labeled 1-LINE on the back of the printer.
You might need to connect the s...

Set up the printer with a computer dial-up modem
If you are using the same phone line for sending faxes and for a computer dial-up modem, follow
these directions for setting up the printer.
Figure B-6   Back view of the printer
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapte r provided for your country/
region.
3 Computer with modem
To set up the printer with a computer dial-up...

If you encounter problems setting up the printer with optional equipment, contact your local service
provider or vendor for further assistance.
Set up the printer with a computer DSL/ADSL modem
If you have a DSL line and use th at phone line to send faxes, follow these instructions to set up your
fax.
1 Telephone wall jack
2 Parallel splitter
3 DSL/ADSL filter
Connect one end of the phone jack that was supplied with the printer to connect to the 1-LINE
port on the back of the printer. Connect the other...

4.Connect the DSL modem to the parallel splitter.
5. Connect the parallel sp litter to the wall jack.
6. Run a fax test.
When the phone rings, the printer automatically answers after the number of rings you set in the
Rings to Answer  setting. The printer begins emi tting fax reception tones to the sending fax machine
and receives the fax.
If you encounter problems setting  up the printer with optional equipment, contact your local service
provider or vendor for further assistance.
Case H: Shared...

1Telephone wall jack
2 Use the phone cord supplied in the box with the printer to con nect to the 1-LINE port.
3 Parallel splitter
4 Computer with modem
5 Telephone
1.Remove the white plug from the  port labeled 2-EXT on the back o f the printer.
2. Find the phone cord that connects from the back of your compute r (your computer dial-up
modem) to a telephone wall jack. D isconnect the cord from the telephone wall jack and plug it
into the port labeled 2-EXT on the back of the printer.
3. Connect a phone...