Honeywell Fusion 3 User Manual

SETUP OPTIONS 
5–17 
 
These schedules are created for the general 
installation and have been predefined with basic 
configurations 
All set to Motion – All cameras are set to motion 
recording (24 hours/day, 7 days/week) 
All set to Continuous – All cameras are set to 
continuous recording (24 hours/day, 7 days/week). 
Default Schedule 1 – All cameras are set to: 
! 
8AM-5PM  Continuous recording 
! 
5PM-8AM  Motion recording 
 
1 Pre-Defined Schedules 
Default Schedule 2 – All cameras are set to: 
!...

FUSION III DVR Digital Recording and Transmission System 
5–18 
 
5.6.1  DAY OF THE WEEK 
 The Day of Week is simply the day of the week for which the schedule is being edited. 
If WED is checked, Wednesday’s schedule is being edited.  
 The Single Day Selection button allows selection of multiple days at once.  
By selecting the Single Day Selection button placing multiple checks in the boxes is 
allowed, thereby selecting multiple days simultaneously. 
 
 
 
 Clicking on Single Day Selection will cause...

SETUP OPTIONS 
5–19 
 
 
Steps 1-6:    Schedule cameras 1-4 to record on MOTION from 9:00am-5:59pm 
Monday through Friday. 
 1. Select Sch01 from the Schedule Number drop down list.  
(This should already be selected by default) 
 2. Select the Single Day Selection button, then select Yes. 
  3.  Place a check in the MON, TUE, WED, THU, and FRI days of the week. 
 4. On the Sch01 line on time selector grid, highlight hours 09-17.  
Press Set. 
 5. Press Camera buttons 1-4 until the green Motion buttons...

FUSION III DVR Digital Recording and Transmission System 
5–20 
 
 
Steps 7-11:   Schedule cameras 1-4 to record on CONTINUOUS from  
6:00pm-8:59am Monday through Friday.
 
 7. Select Sch02 from the Schedule Number drop down list. 
 8. On the Sch02 line again, highlight the hours 18-23 (for 6:00pm-midnight) and 
press Set. 
 9. On the Sch02 line on time selector grid, highlight the hours 00-08 (for midnight to 
8:59am) and press Set. 
 10. Press Camera buttons 1-4 until the Maroon Continuous buttons are...

SETUP OPTIONS 
5–21 
 
 
Steps 12-19:  Schedule cameras 1-4 to record on MOTION from  
12:00am-11:59pm Monday through Friday 
 12. Select the Multi-Day Selection button. 
  13.  Place a check in the SAT days of the week box. 
 14. Select Sch03 from the Schedule Number drop down list. 
 15. Select the Single Day Selection button, then select Yes. 
  16.  Place a check in the SAT and SUN days of the week boxes. 
 17. On the Sch03 line on the time selector grid, highlight hours 00-23  
and press the Set...

FUSION III DVR Digital Recording and Transmission System 
5–22 
 
5.6.3 SCHEDULING SENSORS AND RELAYS (BY EXAMPLE) 
  It is easy to add advanced recording functionality using Sensor Inputs and Relay 
Outputs.  
 SENSOR - Sensor Inputs can be programmed to instantly start one or more cameras 
recording when an alarm occurs. These alarm events can also activate Relay Outputs 
as desired.  
 RELAY OUTPUT - Relay Outputs can be set to activate when motion alarms or sensor 
alarms occur. 
  
 
The schedule...

SETUP OPTIONS 
5–23 
 
 
Steps 1-8:    Schedule cameras 1 and 2 to be activated on Sensor # 3 and/or 
Sensor #5 which will then activate Relay Output #7 and #13. 
 1. Select Sch01 from the Schedule Number drop down list.  
(This should already be selected by default.) 
 2. Select the Single Day Selection button, then select Yes. 
  3.  Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT days 
of the week. 
 4. On the Sch01 line (time selector grid), highlight the hours 00-23 and press...

FUSION III DVR Digital Recording and Transmission System 
5–24 
 
 
Steps 9-15:   Schedule camera 3 to record using MOTION.  
When Motion occurs it will activate Relay Output #7 and #10. 
 9. Select Sch02 from the Schedule Number drop down list. 
 10. Select the Single Day Selection button, then select Yes. 
  11.  Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT  
days of the week. 
 12. On the Sch02 line (time selector grid), highlight the hours 00-23 and press Set. 
 13. Press...

SETUP OPTIONS 
5–25 
 
 
Steps 16-22:  Schedule Sensor #6 to activate Relay #8 when an Alarm occurs. 
NOTE - This will not cause any cameras to record. 
 16. Select Sch03 from the Schedule Number drop down list. 
 17. Select the Single Day Selection button, then select Yes. 
  18.  Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT  
days of the week. 
 19. On the Sch03 line (time selector grid), highlight the hours 00-23 and press Set. 
 20. Press Sensor button #6. 
 21. Press Relay...

FUSION III DVR Digital Recording and Transmission System 
5–26 
 
5.6.4  VERIFYING A RECORDING SCHEDULE 
  1.  Select a single day of the week using the selection check box to the left of the 
specified day.  
  2.  Next move down to the schedule grid.  
  3.  Identify the schedule (or schedules) that have specific hours of the day high-lighted 
in light blue color. The horizontal axis of the schedule grid corresponds to the 24 
hours of each day. 
  4.  After verifying that all hours of the selected day...