Honeywell Fusion 3 User Manual

SETUP OPTIONS 
5–7 
 
5.4 GENERAL SETUP 
 
 
1 Voice Warning Provides an audible warning (.wav sound clip) when 
motion or sensors are activated. 
 
2 Hide Network 
Connectivity  Enables/Disables display of the Network Connectivity 
on the Main Display Screen. 
 
3 Display Relay 
Output Status Bar Enables/Disables display of the Relay Output Status 
Bar on the Main Display Screen. 
 
4 Display Sensor 
Status Bar Enables/Disables display of the Alarm Status Bar on 
the Main Display Screen 
 
5 Display...

FUSION III DVR Digital Recording and Transmission System 
5–8 
 
10 Volume Opens the Volume playback control panel. 
 
11 Video Loss Alarm These options allow video loss to be designated as an 
alarm. 
 
12 Intensive Recording Allows you to enable Intensive Recording on sensor 
or motion. 
 
5.4.1 VOICE WARNING 
  The DVR unit can be set to play a sound file when either a Motion or Sensor event 
occurs. This file can be a custom created sound file that is unique to your application. 
The selected WAV...

SETUP OPTIONS 
5–9 
 
5.4.2  INTENSIVE RECORDING OVERVIEW 
  The Intensive Recording Option allows increasing of the Pictures Per Second and the 
resolution of any camera recording using sensor activation.  
 
 
1 Enable Intensive 
Recording Sensor Enables intensive recording on sensor events. 
 
 2 Enable Intensive 
Recording Motion Enables intensive recording on motion events. 
 
5.4.3  HOW TO USE INTENSIVE RECORDING 
  The Intensive Recording option is set up as an ‘All or Nothing’. This means that...

FUSION III DVR Digital Recording and Transmission System 
5–10 
 
5.4.4  VIDEO LOSS ALARM 
  The DVR supports a Video Loss Alarm function which allows an Alarm Event to occur 
when a camera loses its signal. The lost signal can be due to Power failure to the 
camera, the camera cable being cut or unplugged, or the camera being damaged in 
some way. 
  In order to use Video Signal Loss detection, cameras must either be ENABLED or 
DISABLED. This is because the DVR needs to know which cameras it should...

SETUP OPTIONS 
5–11 
 
5.4.5 AUDIO RECORDING 
  The DVR is capable of recording up to 16 channels of audio depending on the model 
purchased. 
 
Audio Features:
 
•  8000Hz playback in Live Mode 
•  Audio input level should be 1Vp-p 
•  Up to 48000Hz playback in search mode 
• Mono Sampling 
•  Line-In type (Requires amplification) 
 
 
 
Data Size (per channel):
 
•  1 Second:  1,625 bytes 
•  1 Minute:  97,500 bytes 
•  10 Minutes:  975,000 bytes 
•  1 Hour:  5,850,000 bytes 
• 1 Day: 140,400,000 bytes...

FUSION III DVR Digital Recording and Transmission System 
5–12 
 
5.5 FRAME SETUP 
  The Frame Setup menu gives the user the option to adjust both the resolution and the 
number of images per second each camera will record. When setting up the FPS 
sliders, the BLUE slider represents the frames in which the DVR will capture the 
incoming video at while the RED slider represents the frame rate that will be recorded. 
 This option is beneficial when higher frame rates are desired remotely. The Server will...

SETUP OPTIONS 
5–13 
 
 
1 Set Default Selecting this option resets all camera frames and 
resolutions to the default settings. 
 
2 Camera Number The cameras are given different numbers to 
distinguish them when viewing the frame status. 
Adjust the recorded frames per second by sliding the 
bar to the left and right. 
 
3  Number of Frames Displays the number of frames that are selected for 
each camera. 
 
4 Frame Select Adjusts the frames for each camera. 
 
5 Resolution Displays the available...

FUSION III DVR Digital Recording and Transmission System 
5–14 
5.5.2  FRAME SETUP (LOW-END) 
 
  

SETUP OPTIONS 
5–15 
 
 
   
 
1 Set Default Selecting this option resets all camera frames and 
resolutions to the default settings. 
 
2 Camera Number The cameras are given different numbers to 
distinguish them when viewing the frame status. 
Adjust the recorded frames per second by sliding the 
bar to the left and right. 
 
3  Number of Frames Displays the number of frames that are selected for 
each camera. 
 
4 Frame Select Adjusts the frames for each camera. 
 
5 Quality Affects the quality of the...

FUSION III DVR Digital Recording and Transmission System 
5–16 
 
5.6 RECORDING SCHEDULE 
  Creating a customized Schedule is important to maximize the efficiency of the DVR. 
This DVR offers numerous options to allow for a wide variety of different needs and 
requirements. 
 
 
    5 
   7 
4   3     2    1    8   6