Honeywell Fusion 3 User Manual

 
Document 900.0803 – 08/16 – Rev 2 
 
FUSION III DVR 
Digital Recording and Transmission System
 
User Guide 
 
 
 
  

 
 
ISSUE DATE  REVISIONS 
1  June 2006  Initial Release 
2  August 2006  Updated for content  

   
FCC COMPLIANCE STATEMENT 
 
INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO 
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF 
THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION 
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A 
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE 
RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH 
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL...

 
NATIONAL POWER DEVIATION STANDARDS 
AUSTRALIA / NEW ZEALAND 
COMPONENTS COMPLY WITH THE RELEVANT PORTIONS OF IEC 60950 OR THE 
APPLICABLE COMPONENT STANDARD OR THE RELEVANT AUSTRALIAN / NEW ZEALAND 
STANDARD. 
AC POWER DISTRIBUTION SYSTEMS CLASSIFIED AS TT OR IT ARE NOT ALLOWED 
INTENDED FOR USE ON A TN SYSTEM. 
-------------------------------------------------------------------- 
Rated   Nominal 
Current of   cross-sectional 
Equipment   area 
(A)   (mm²)...

  GERMANY 
(GESETZ UBER TECHNISCHE ARBEITSMITTEL (GARATESICHERHEITSGESETZ) [LAW OF 
TECHNICAL LABOUR EQUIPMENT {EQUIPMENT SAFETY LAW}], OF 23RD OCTOBER 1992, 
ARTICLE 3, 3RD PARAGRAPH, 2ND SENTENCE, TOGETHER WITH THE ALLGEMEINE 
VERWALTUNGSVORSCHRIFT ZUR URCHFUHRUNG DES ZWEITEN ABSCHRITTS DES 
GERATESICHERHEITSGESETZES [GENERAL ADMINISTRATIVE REGULATION ON THE 
EXECUTION OF THE SECOND SECTION OF THE EQUIPMENT SAFETY LAW], OF 10TH 
JANUARY 1996, ARTICLE 2, THE PARAGRAPH, ITEM 2). 
KOREA 
PLUGS FOR THE...

 
RACK MOUNT INSTRUCTIONS 
A)  Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating 
ambient temperature of the rack environment may be greater than room ambient. Therefore, 
consideration should be given to installing the equipment in an environment compatible with the 
maximum ambient temperature (Tma) specified by the manufacturer. 
  
B)  Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air 
flow required for safe...

   
 
 
EN 50130-4:1996 Notice 
 
 
1.  Uninterrupted Power supply (UPS) 
2.  Maximum lengths of wiring connected to the sensor inputs and control outputs are 30 meters. 
EN 55022 CLASS A Notice 
 
 
WARNING 
This is a class A product. In a domestic environment this product may cause radio interference in 
which case the user may be required to take adequate measures. 
  

   
OPTICAL AND ACOUSTICAL STATEMENTS 
VISIBLE LED STATEMENT 
The LEDs on this DVR unit are classified as “Class 1 LED Product” in accordance with EN 60825-1. 
 
LASER SAFETY STATEMENT FOR A CLASS 1 LASER PRODUCT 
This CD-ROM Storage device has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a residential...

   
IMPORTANT SAFEGUARDS 
1. 
Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and 
follow all the operating and other instruction 
2. 
Power Sources – This product should be operated only from the type of power source indicated 
on the label. If you are not sure of the type of power supply to your home or business, consult 
your product dealer or local power company 
3. 
Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure...

   
15. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified 
service personnel under the following conditions: 
a.  When the power-supply cord or plug is damaged. 
b.  If liquid has been spilled, or objects have fallen into the unit. 
c.  If the unit has been exposed to rain or water. 
d.  If the unit does not operate normally by following the operating instructions. Adjust only 
those controls that are covered by the operating instructions as an improper...