Honeywell Fusion 3 User Manual

DVR BASICS 
4–7 
 
4.6  RECORDING STATUS INDICATOR 
  
 
 Recording A red light is displayed when the camera is currently being 
recorded to the DVR unit. 
 
 Motion Detection A green light is displayed when a camera (set up for 
motion detection) detects motion 
  Display A square is displayed when the camera is currently not 
being recorded to the DVR unit. 
  
Special 
Recording There are several different types of DVR “Special Recording” situations.  
When this happens, text is displayed on the...

FUSION III DVR Digital Recording and Transmission System 
4–8 
 
4.7 SCREEN DIVISION MENU 
 The Screen Division options allow you to change camera views with 1, 4, 9, or 16 
camera view configurations as well as full screen and rotating options. 
 
 1
st Four Cameras Displays cameras 1-4 in the Video Display Area.  
  2
nd Four Cameras Displays cameras 5-8 in the Video Display Area 
  3
rd Four Cameras Displays cameras 9-12 in the Video Display Area.  
  4
th Four Cameras Displays cameras 13-16 in the...

DVR BASICS 
4–9 
NOTES: 
 
  

 
5–1 
SECTION 5 
SETUP OPTIONS 
5.1 SETUP OVERVIEW 
 The Setup options allow optimization of your DVR unit by adjusting things like camera 
names, recording schedules and more. It is extremely important to setup your DVR 
correctly for several reasons: 
 
• Recording Schedules –Increase the amount of pertinent recorded video that is saved 
on the DVR by optimizing the recording schedule. Optimize the type of recording done 
by adding motion detection to this as well, again increasing the amount of...

FUSION III DVR Digital Recording and Transmission System 
5–2 
 
5.2 CAMERA SETUP 
\] 
 1 Select Camera Selects the current camera to be edited. 
 2 Video Display Displays the live video of the current camera selected. 
 3 Camera Name Ability to specify a name for each camera. (up to 14 
characters for every camera) 
 4 Adjust Default Adjusts the color settings for the selected camera 
back to the system default. 
  5  Adjust All Default Adjusts the color settings for ALL cameras to the 
system default....

SETUP OPTIONS 
5–3 
5.2.1  CONNECTING A NETWORK DEVICE 
 
 1. Select the camera channel you plan 
to add a Network Device to.   
 
2. Check the Use Network Device Box 
 
3. If your Network Device supports PTZ 
check the Enable Network Device 
PTZ Box. 
 
4. Click Setup Network Device and the 
Network Device Properties window 
will appear.  
 
5. Click Setup to begin adding a 
Network Device. 
 
6. Select the Manufacturer and Model of 
camera you are adding then click 
next. 
 
7. Enter the IP Address,...

FUSION III DVR Digital Recording and Transmission System 
5–4 
 
5.3 MOTION 
 
 
1 Select Camera Selects the current camera to be edited. 
 
2 Pre-Alarm Allows record of a section of video just prior to motion 
or sensor activation. 
 
3 Motion Region 
Setup The box displays the video for the selected cameras 
and allows you to create up to 5 motion regions. 
 
 4  Full Screen Pop-Up 
on Sensor When a sensor is activated, the camera is displayed 
full screen.  
 
5 Sensitivity Adjusts the sensitivity...

SETUP OPTIONS 
5–5 
 
7  Full Screen Pop-Up When motion is detected, the camera is displayed full 
screen. 
 
8  Clear Motion Area Clears all motion areas for the selected camera. 
 
9 Post Alarm 
(MOTION) Record video after motion has stopped for a specified 
period of time. This option will only work for camera 
set to record using motion detection. 
 
10 Post Alarm 
(SENSOR) Record video after a sensor event has ceased for a 
specific period of time. This option will only work for 
cameras set to...

FUSION III DVR Digital Recording and Transmission System 
5–6 
 
5.3.3  REGULAR INTERVAL RECORDING 
Motion To enable regular Interval Recording on Motion follow these steps: 
  1.  Setup a camera to record on motion.  
  2.  Place a check in the Regular Interval Recording box.  
  3.  Specify how often to take an image when no motion is occurring. You can go as 
little as 1 image per second.  
  
Sensor To enable regular Interval Recording on a Sensor Event follow these steps: 
  1.  Setup a camera to...