Honeywell 1250g2 Manual

6 - 61
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Omnidirectional Settings >
GS1 DataBar Omnidirectional On/Off
GS1 DataBar Omnidirectional Redundancy
If you are encountering errors when reading GS1 DataBar Omnidirectional 
bar codes, you may want to adjust the redundancy count.  Redundancy 
adjusts the number of times a bar code is decoded before transmission, 
which may reduce the number of errors.  Note that the higher the redun-
dancy count, the longer it will take to decode the bar code....

6 - 62
GS1 DataBar Limited
< Default All GS1 DataBar Limited Settings >
GS1 DataBar Limited On/Off
GS1 DataBar Limited Redundancy
If you are encountering errors when reading GS1 DataBar Limited bar 
codes, you may want to adjust the redundancy count.  Redundancy adjusts 
the number of times a bar code is decoded before transmission, which may 
reduce the number of errors.  Note that the higher the redundancy count, 
the longer it will take to decode the bar code.  To adjust the redundancy, 
scan the GS1...

6 - 63
GS1 DataBar Expanded
< Default All GS1 DataBar Expanded Settings >
GS1 DataBar Expanded On/Off
GS1 DataBar Expanded Redundancy
If you are encountering errors when reading GS1 DataBar Expanded bar 
codes, you may want to adjust the redundancy count.  Redundancy adjusts 
the number of times a bar code is decoded before transmission, which may 
reduce the number of errors.  Note that the higher the redundancy count, 
the longer it will take to decode the bar code.  To adjust the redundancy, 
scan the...

6 - 64
GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length.  Refer to 
Message Length Description (page 6-2) for additional information.  Mini-
mum and Maximum lengths = 1-80.   Minimum Default = 3, Maximum 
Default = 80.
Trioptic Code
Trioptic Code is used for labeling magnetic storage media.
GS1 Emulation
The scanner can automatically format the output from any GS1 data carrier to 
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar  
symbol.  GS1...

6 - 65
If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are converted 
to EAN13 format.  
Default = GS1 Emulation Off.
Postal Codes
The following lists linear postal codes.  Any combination of linear postal code 
selections can be active at a time.  
China Post (Hong Kong 2 of 5)

GS1 DataBar Emulation GS1-128 Emulation
* GS1 Emulation Off GS1 Code Expansion Off
EAN8 to EAN13 Conversion 

6 - 66
China Post (Hong Kong 2 of 5) On/Off
China Post (Hong Kong 2 of 5) Redundancy
If you are encountering errors when reading China Post (Hong Kong 2 
of 5) bar codes, you may want to adjust the redundancy count.  
Redundancy adjusts the number of times a bar code is decoded 
before transmission, which may reduce the number of errors.  Note 
that the higher the redundancy count, the longer it will take to decode 
the bar code.  To adjust the redundancy, scan the China Post (Hong 
Kong 2 of 5)...

7 - 1
7
Interface Keys
Keyboard Function Relationships
The following Keyboard Function Code, Hex/ASCII Value, and Full ASCII 
“CTRL”+  relationships apply to all terminals that can be used with the scanner.  
Refer to page 2-23 enable Control + ASCII mode.
Function Code HEX/ASCII Value Full ASCII “CTRL” +
NUL 00 @
SOH 01 A
STX 02 B
ETX 03 C
EOT 04 D
ENQ 05 E
ACK 06 F
BEL 07 G
BS 08 H
HT 09 I
LF 0A J
VT 0B K
FF 0C L
CR 0D M
SO 0E N
SI 0F O
DLE 10 P
DC1 11 Q
DC2 12 R
DC3 13 S
DC4 14 T
NAK 15 U
SYN 16 V
ETB...

7 - 2
The last five characters in the Full ASCII “CTRL”+ column  ( [  ] 6 - ), apply to 
US only.  The following chart indicates the equivalents of these five characters 
for different countries.
Note: Not all countries may be supported by your device.
Supported Interface Keys
Country
Codes
United States[\]6-
Belgium [ < ] 6 -
Scandinavia8

7 - 3
CR 0D CR/Enter RETURN
SO 0E Insert Ins Help
SI 0F Escape ESC
DLE 10 F11 F11
DC1 11 Home Home
DC2 12 Print Prnt Scrn
DC3 13 Back Space BACKSPACE
DC4 14 Back Tab LSHIFT TAB
NAK 15 F12 F12
SYN 16 F1 F1
ETB 17 F2 F2
CAN 18 F3 F3
EM 19 F4 F4
SUB 1A F5 F5
ESC 1B F6 F6
FS 1C F7 F7
GS 1D F8 F8
RS 1E F9 F9
US 1F F10 F10
DEL 7F BACKSPACE
ASCIIHEX
IBM AT/XT and 
PS/2 
Compatibles, 
WYSE PC/AT
Supported Keys
Apple Mac/iMac 
Supported Keys 

7 - 4