Honda Pilot Owners Manual

							380
Features
HomeLink® Universal Transceiver*
The HomeLink ® Universal Transceiver can be pr ogrammed to operate up to three 
remote controlled devices around your home, such as garage doors, lighting, or 
home security systems.
Refer to the safety information that came wi th your garage door opener to test that 
the safety features are functioning properly. If you do not have the safety 
information, contact the manufacturer.
Before programming HomeLink, make sure that people and objects are out of the 
way of the garage or gate to prevent potential injury or damage.
When programming a garage door opener, park  just outside the garage door’s path.
■Important Safety Precautions
1HomeLink ® Universal Transceiver*
Before programming HomeLi nk to operate a garage 
door opener, confirm that the opener has an external 
entrapment protection system, such as an “electronic 
eye,” or other safety and reverse stop features. If it 
does not, HomeLink may not  be able to operate it.
* Not available on all models
16 PILOT-31TG76000.book  380 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							381
uuHomeLink ® Universal Transceiver*u Training HomeLink
Continued
Features
Training HomeLink
If it is necessary to er ase a previously entered 
learned code:
• Press and hold the two outside buttons for 
about 20 seconds, until the red indicator 
blinks. Release the bu ttons, and proceed to 
step 1.
• If you are training the second or third 
button, go directly to step 1.
The instructions on the next page should  work for most gate or garage openers, but 
may not work for all.  For detailed instru ctions about your specific remote opener, 
visit  http://www.homelink.com or call (800)355-3515.
Red Indicator
Models without panoramic glass 
roof
Red Indicator
Models with panoramic glass roof
16 PILOT-31TG76000.book  381 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							uuHomeLink ® Universal Transceiver*u Training HomeLink
382
Features
■Training a Button1Training HomeLink
Retraining a Button
If you want to retrain  a programmed button for a 
new device, you do not ha ve to erase all button 
memory. You can replace the existing memory code 
using this procedure:
1. Press and hold the desired HomeLink button 
until the HomeLink indi cator begins to blink.
2.
Quickly release the Home Link button and follow 
steps 1 - 3 under “Training a Button.” You do not 
need to press and rele ase the HomeLink button 
again in step 2.
Indicator remains on 
for about 25 secs.
Standard transmitter
Indicator remains on for 
about 25 secs.
Rolling code transmitter
Erasing Codes
To erase all the codes, press and hold the two outside 
buttons until the HomeLink i ndicator begins to blink 
(about 10 to 20 secs). You should erase all codes 
before selling the vehicle.
If you have any problems, see the device’s 
instructions, visit  www.homelink.com , or call 
HomeLink at (800) 355-3515.
HomeLink®  is a registered tra demark of Gentex 
Corporation.4.
3.
2.
5.A.
B.
1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the 
HomeLink button you want to program.
Press and release the desi red HomeLink button. Hold  the button on the remote 
transmitter. Does the HomeLink indicato r (LED) change from slowly blinking to 
constantly on or rapidly blinking? The pr ocess should take less than 60 seconds.
Press and hold the 
programmed HomeLink 
button for about a sec.
Does the device (garage 
door opener) work? Press and release the Ho
meLink button. Press 
and release the button on the remote every 2 
secs.
Does the HomeLink indicator (LED) change from 
slowly blinking to  constantly on or rapidly 
blinking? The process should  take less than 60 
seconds.
Training 
Complete Press and hold the HomeLink button again.
Press and hold the HomeLink 
button again.
The remote-controlled device 
should operate.
Training Complete The remote has a ro
lling code. Press the 
“learn” button on the remote-controlled 
device (e.g. garage door opener).
Within 30 secs, press and hold the 
programmed HomeLink button for 2 secs.
HomeLink indicator  rapidly blinks.HomeLink LED is 
constantly  on.
YESNO
YES
YESNONO
16 PILOT-31TG76000.book  382 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							383Continued
Features
Bluetooth® HandsFreeLink ®
Bluetooth® HandsFreeLink ® (HFL) allows you to place  and receive phone calls using 
your vehicle’s audio system, without handling your cell phone.
Using HFL
 (Pick-up) button:  Press to go directly to the  Phone screen or to answer an 
incoming call.  (Hang-up/Back) button:  Press to end a call or to cancel a command.
 (Talk) button:  Press to call a number wi th a stored voice tag.
 (Phone) button:  Press to go directly to the  Phone screen.
Selector knob:  Rotate   to select an item on the screen, then press  .
■HFL Buttons
1Using HFL
To use HFL, you need a  Bluetooth-compatible cell 
phone. For a list of compatible phones, pairing 
procedures, and special  feature capabilities:
•U.S.: Visit www.handsfreelink.honda.com , or call 
1-888-528 -7876.
•Canada: Visit  www.handsfreelink.ca , or call 1-888-
528 -7876.
Voice control tips
•Aim the vents away from the ceiling and close the 
windows, as noise coming fr om them may interfere 
with the microphone.
•Press and release the   button when you want to 
call a number using a st ored voice tag. Speak 
clearly and naturally after a beep.
•If the microphone picks up vo ices other than yours, 
the command may be misinterpreted.
•To change the volume level, use the audio system's 
volume knob or the remote audio controls on the 
steering wheel.
State or local laws may pr ohibit the operation of 
handheld electronic devi ces while operating a 
vehicle.
If you receive a call while  using the audio system, the 
system resumes its operati on after ending the call.
Up to 20 speed dial entries can be stored. If there is 
no entry in the system, Speed Dial is disabled. 2 Speed Dial P. 398
Up to 20 call histories can be  stored. If there is no call 
history, Call History is disabled.
Models with color audio system
Microphone
 (Talk) Button
 (Hang-up/Back) Button
 (Pick-up) Button
Selector Knob  (Phone) Button
Volume up
Volume down
16 PILOT-31TG76000.book  383 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							uuBluetooth ® HandsFreeLink ®u Using HFL
384
Features
The audio/information screen notifies you 
when there is an incoming call.
Certain manual functions are disabled or inoperable while the ve hicle is in motion. 
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed  dial entries can be called using voice commands while 
the vehicle is in motion.
2 Speed Dial P. 398
■HFL Status Display1Using HFL
Bluetooth ® Wireless Technology
The  Bluetooth ® word mark and logos are registered 
trademarks owned by  Bluetooth SIG, Inc., and any 
use of such marks by Honda Motor Co., Ltd., is under 
license. Other trademarks and trade names are those 
of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt the audio 
s y s te m  wh e n  it  is  p la y i n g .  It  wi ll  re s u m e w h en  t h e c a l l 
is ended.
HFL Mode
Battery Level Status
Signal Strength
Bluetooth  Indicator
Appears when your 
phone is connected 
to HFL.
Roaming Status
Caller's Name
■Limitations for Manual Operation
1HFL Status Display
The information that appears on the audio/
information screen vari es between phone models.
You can change the system language. 2 Customized Features  P. 344
16 PILOT-31TG76000.book  384 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							385
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
HFL Menus
The power mode must be in ACCESSO RY or ON to use the system.1HFL Menus
To use HFL, you must first pair your  Bluetooth-
compatible cell phone to th e system while the vehicle 
is parked.
Some functions are li mited while driving. 
 or 
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
*1 : Appears only when a phone is connected to HFL.
PhoneSpeed Dial*1Add New
Select a phone number from the call history to 
store as a speed dial number.
Call History
PhonebookSelect a phone number from the phonebook to 
store as a speed dial number.
Phone Number
Enter a phone number to store as a speed dial 
number.
Dialed Calls
Received Calls
Missed Calls
Phonebook*1
Dial*1
Call History*1
Display the paired phone’s phonebook.
Enter a phone number to dial. (Existing entry list)
16 PILOT-31TG76000.book  385 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							386
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
*1 : Appears only when a phone is connected to HFL.
Redial the last number dialed in the phone’s history.
Add New Device
Connect a Phone
Connect an Audio Device
Bluetooth SetupPhone Setup
Redial*1
Pair a phone to the system.
Connect a phone to the system.
Change a pairing code.
Disconnect All Devices
Delete Device
Pass-key
Disconnect a paired device from the system.
Delete a previously paired device. Connect a 
Bluetooth® Audio device to the 
system.
16 PILOT-31TG76000.book  386 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							387
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
*1 : Appears only when a phone is connected to HFL.
Call History
Phonebook
Phone Number
Speed Dial*1
Select a phone number from the phonebook 
to store as a speed dial number. Select a phone number from the call history 
to store as a speed dial number.
Create a voice tag for a speed dial number.
Change Speed Dial
Delete Speed Dial
Store Voice Tag
Enter a phone number to store as a speed dial 
number.
Delete a previously stored speed dial number.
Change Voice Tag
Delete Voice Tag
Change a previously stored speed dial 
number.
Change a voice tag for a speed dial number.
Delete a voice tag for a speed dial number.
Add New
Existing entry list
16 PILOT-31TG76000.book  387 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							388
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
Fixed
Mobile Phone
System Clear
Ringtone
Select the ring tone stored in the connected 
cell phone.
Name Priority
Number Priority
Caller ID InfoPrioritize the caller’s name as the caller ID.
Clear the system of all paired phones, phonebook entries, 
and security codes. Prioritize the caller’s phone number as the 
caller ID.
Select the ring tone stored in HFL.
16 PILOT-31TG76000.book  388 ページ  ２０１６年１０月１９日　水曜日　午後５時４分 
						

							Continued389
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To pair a cell phone (when there is no 
phone paired to the system)
1. Press the   button or the   button.
2. Rotate   to select  Yes, then press  .
3. Make sure your phone is in search or 
discoverable mode, then press  .
u HFL automatically searches for a 
Bluetooth ® device.
4. When your phone appears on the list, select 
it by pressing  .
u If your phone does not appear, select 
Phone Not Found?  and search for 
Bluetooth ® devices using your phone. 
From your phone, select 
HandsFreeLink .
5. The system gives you a pairing code on the 
audio/information screen.
u Confirm if the pairing code on the screen 
and your phone match.
This may vary by phone.
6. A notification appears on the screen if 
pairing is successful.
■Phone Setup1Phone Setup
Your  Bluetooth -compatible phone must  be paired to 
HFL before you can make and receive hands-free 
calls.
Phone Pairing Tips:
•You cannot pair your phone  while the vehicle is 
moving.
•Up to six phones can be paired.•Your phone’s battery may dr ain faster when it is 
connected to HFL.
•If your phone is not ready for pairing or not found 
by the system within three minutes, the system will 
time out and return to idle.
Once you have paired a phone, you can see it 
displayed on the screen with one or two icons on the 
right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is compatible with Bluetooth ® Audio.
16 PILOT-31TG76000.book  389 ページ  ２０１６年１０月１９日　水曜日　午後５時４分