Home > Honda > Automobile > Honda Pilot Owners Manual

Honda Pilot Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Honda Pilot Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 328 Honda manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 661
    							100
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Instrument Panel
    MessageConditionExplanation
    ●Appears when the steering wheel is locked.●Move the steering wheel left and right while pressing 
    the  ENGINE START/STOP  button.
    ●Appears when the power mode is in ACCESSORY.
    —
    ●Appears after the driver’s  door is opened when the 
    power mode is in ACCESSORY.●Press the  ENGINE START/STOP  button twice with your 
    foot off the brake pedal to change the power mode to 
    VEHICLE OFF (LOCK).
    ●Appears when you close the door with the power mode 
    is in ON without the smart entry remote inside the 
    vehicle.●Disappears when you bring the smart entry remote back 
    inside the vehicle and close the door.
    2 Smart Entry Remote Reminder  P. 153
    ●Appears when the smart entry remote battery becomes 
    weak.●Replace the battery as soon as possible.
    2Replacing the Button Battery  P. 598
    Canadian models
    16 PILOT-31TG76000.book  100 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							101
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Continued
    Instrument Panel
    MessageConditionExplanation
    ●Appears if the smart entry remote battery is too weak to 
    start the engine or the key is not within operating range 
    to start the engine.
    The beeper sounds six times.●Bring the smart entry remote in front of the  ENGINE 
    START/STOP  button.
    2If the Smart Entry Remote Battery is Weak  P. 618
    ●Appears three seconds after the To Start, Hold 
    Remote Near Start Button , then To Start Engine  
    messages appeared sequentially.●Unless you bring the smart entry remote in front of the 
    ENGINE START/STOP  button, this message does not 
    appear.
    2 If the Smart Entry Remote Battery is Weak  P. 618
    ●Appears if there is a problem with the cooling system.●Drive slowly to prevent overheating and have your 
    vehicle checked by a dealer as soon as possible.
    ●Appears when there is a problem with the headlights*.●Appears while driving - The low beam headlights 
    may not be on. When conditions allow you to drive 
    safety, have your vehicle chec ked by a dealer as soon as 
    possible.
    ●Appears if there is a problem with the parking sensor 
    system*.
    ●Check if the area around the sensor(s) is covered with 
    mud, ice, snow, etc.  If the indicator(s) stays on or the 
    beeper does not stop even after you clean the area, 
    have the system checked by a dealer.
    * Not available on all models
    16 PILOT-31TG76000.book  101 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							102
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Instrument Panel
    MessageConditionExplanation
    ●Appears when pressing the Intelligent Traction 
    Management button.
    2 Intelligent Traction Management* P. 486
    AWD models
    2WD models
    * Not available on all models
    16 PILOT-31TG76000.book  102 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							103
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Continued
    Instrument Panel
    MessageConditionExplanation
    ●Flashes when the system sens es a likely collision with a 
    vehicle in front of you.●Take the appropriate means to  prevent a collision (apply 
    the brakes, change lanes, etc.)
    2 Collision Mitigation Braking SystemTM (CMBSTM)* 
    P. 533
    2 Adaptive Cruise Control (ACC)
    * P. 493
    MessageConditionExplanation
    ●Appears when ACC has been automatically canceled.●You can resume the set speed after the condition that 
    caused ACC to cancel improves. Press the  RES/+/SET/–  
    button.
    2 Adaptive Cruise Control (ACC)* P. 493
    Models with CMBS or ACC
    Models with ACC
    * Not available on all models
    16 PILOT-31TG76000.book  103 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							104
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Instrument Panel
    MessageConditionExplanation
    ●Appears when the transmission system temperature is 
    too high. The vehicle does not operate properly.●Stop in a safe place in (P.●Let the engine idle until the message disappears.
    ●Appears when you set the power mode to ACCESSORY 
    or ON.2 Starting the Engine  P. 463
    ●Appears when the engine does not restart automatically 
    due to the following reason:
    ●The hood is open.●There is a problem in the syst em that disables Auto Idle-
    stop.
    ●Follow the normal procedure to start the engine.
    2 Starting the Engine  P. 463
    ●Appears when you attempt to change to another gear 
    position with the transmission in 
    (P and the engine 
    OFF.
    ●To select another gear position while in (P the engine 
    must be ON.
    ●Appears when you try to chan ge the gear position after 
    the position has automatically been changed to 
    (P with 
    the driver’s door open and  the driver’s seat belt 
    unfastened.
    ●Press the park button If you leave the vehicle.
    Automatic transmission models with electronic gear selector
    16 PILOT-31TG76000.book  104 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							105
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Continued
    Instrument Panel
    MessageConditionExplanation
    ●Appears when you change to (N, then press and hold 
    (N again for  two seconds.
    ●The gear position remains in (N for 15 minutes, then 
    automatically switches to 
    (P.
    2 If you want to keep the transmission in (N 
    position [car wash mode] P. 477
    ●Appears when the vehicle is stopped with the driver’s 
    seat belt unfastened and there is a chance that the 
    vehicle may roll unintentionally.●Press the (P button before release the brake pedal 
    when idling, parking or exiting the vehicle.
    2 Shift Operation  P. 475
    ●Appears when the engine stops without the 
    transmission in 
    (P, and does not restart automatically.●Appears if you open the hood while Auto Idle-stop 
    activates.
    ●If you want to set the power mode to ON, change the 
    gear position to 
    (P.●If you want to start the engine, follow the normal 
    procedure.
    2Starting the Engine  P. 463
    Automatic transmission models with electronic gear selector
    16 PILOT-31TG76000.book  105 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							106
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Instrument Panel
    MessageConditionExplanation
    ●Appears when you try to ch ange the gear position 
    without depressing the brake pedal.●Depress the brake pedal, then select a shift button.
    ●Appears when you try to ch ange the gear position 
    without releasing your foot off the accelerator pedal.●Release your foot off the accelerator pedal, then select a 
    shift button.
    ●Appears when the (P button is pressed while the 
    vehicle is moving.
    ●Appears if you change the gear position to (R while the 
    vehicle is moving forward, or to 
    (D while the vehicle is 
    reversing.
    ●Make sure that the vehicle comes to a stop before 
    operating the select button.
    ●Appears when you set the po wer mode to ON without 
    fastening the driver’s seat belt.
    ●Appears when you change  the gear position after (P 
    has been automatically select ed with the driver’s door 
    open, the driver’s seat belt  unfastened, then the brake 
    pedal is released.
    ●Fasten the seat belt properly before you start to drive.
    2 Shift Operation  P. 475
    ●Appears when you press the (P button but it is not 
    engaged due to low ATF temperature.●Depress the brake pedal until this message disappear.
    Automatic transmission models with electronic gear selector
    16 PILOT-31TG76000.book  106 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							107
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Continued
    Instrument Panel
    MessageConditionExplanation
    ●Appears when you unlock an d open the driver’s door 
    while the engine is running  by the smart entry remote.
    2Remote Engine Start* P. 465
    * Not available on all models
    16 PILOT-31TG76000.book  107 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							108
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Instrument Panel
    MessageConditionExplanation
    ●Appears when the vehicle is driving out of a detected 
    lane. Rapid vibrations on the steering wheel.
    ●Appears when the vehicle is driving out of a detected 
    lane.
    ●Keep the vehicle within the lane you are driving.●The color of either line chan ges from white to amber as 
    the vehicle gets closer to th at side of the lane line.
    2Lane Keeping Assist System (LKAS)* P. 509
    ●Rapid vibrations on the steering wheel when the vehicle 
    is drifting out of a detected lane.
    ●Rapid vibrations on the steering wheel with steering 
    assist when the vehicle is drifting out of a detected lane.
    ●Keep the vehicle within the lane you are driving.●The color of either line chan ges from white to amber as 
    the vehicle gets closer to th at side of the lane line.
    2Road Departure Mitigation (RDM) System* P. 504
    ●Blinks when you fail to steer the vehicle. The beeper 
    sounds simultaneously if selected by customization.●Operate the steering wheel  to resume the LKAS.
    Models with LKAS
    Lane Keeping Assist System (LKAS)
    Road Departure Mitigation (RDM) System
    When you selected Warning Only
    When you selected Normal or Wide
    * Not available on all models
    16 PILOT-31TG76000.book  108 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    							109
    uuIndicators uMulti-Information Display (MID) Warning and Information Messages
    Continued
    Instrument Panel
    MessageConditionExplanation
    ●Appears when the LKAS is  in operation, or the LKAS 
    button is pressed, but there is a problem with a system 
    related to the LKAS. The LKAS cancels automatically. 
    The beeper sounds simultaneously if selected by 
    customization.●If any other system indicators come on, such as the 
    VSA ®, ABS and brake system, take appropriate action.
    2Indicators  P. 78
    ●Appears when the LKAS is  in operation, or the LKAS 
    button is pressed, but there the temperature inside the 
    LKAS camera is too high. The LKAS cancels 
    automatically. The beeper  sounds simultaneously if 
    selected by customization.●Use the climate control system to cool down the 
    camera.
    ●Goes off  - The camera has been cooled down. Pressing 
    the LKAS button can resume the system.
    2 Front Sensor Camera* P. 491
    ●Appears when the area around  the camera is blocked 
    by dirt, mud, etc. Stop your vehicle in a safe place, and 
    wipe it off with a soft cloth.
    ●May appear when driving in bad weather (rain, snow, 
    fog, etc.)
    ●Have your vehicle checked by  a dealer if the indicator 
    and message come back on after you cleaned the area 
    around the camera.
    Models with LKAS
    * Not available on all models
    16 PILOT-31TG76000.book  109 ページ  2016年10月19日 水曜日 午後5時4分 
    						
    All Honda manuals Comments (0)

    Related Manuals for Honda Pilot Owners Manual