Handspring Visor Pro Handheld User Guide

							Chapter 9 Page 231
Owner preferences
The Owner Preferences screen enables you to record a name, company 
name, phone number, or any other information that you want to 
associate with your handheld.
If you use the Security application to turn off and lock your handheld 
with a password, information that you put in the Owner Preferences 
displays the next time you turn on your handheld. See Chapter 1 for 
more information.
To enter the Owner preferences:
nEnter the text that you want to associate with your handheld in the 
Owner Preferences screen. If you enter more text than can fit on 
one screen, a scroll bar automatically appears on the right side of 
the screen.
If you assign a password with the Security application, the 
information in the Owner Preferences screen cannot be changed. In 
this case, an Unlock button appears at the bottom of the screen. 
To unlock the Owner Preferences screen:
1. Tap Unlock.
2. Enter the password that you defined in the Security application.
3. Tap OK. 
						

							Page 232  Setting Preferences for Your Handheld
ShortCuts preferences
The ShortCuts Preferences screen enables you to define abbreviations 
for entering text with Graffiti strokes. This section describes how to 
create, edit, and delete a ShortCut. See Chapter 2 for more information 
on the use of ShortCuts. 
Creating a ShortCut
You can create a ShortCut for any words, letters, or numbers. All 
ShortCuts you create appear on the list in the ShortCut Preferences 
screen. All the ShortCuts are available in any of your handheld 
applications and are backed up on your computer when you perform 
a HotSync operation.
To create a ShortCut:
1. Tap New.
2. On the ShortCut name line, enter the letters you want to use to 
activate the ShortCut.
3. Tap the ShortCut Text area and enter the text that you want to 
appear when you write the ShortCut characters.
Tip:
You may want to add a space (space character) after the 
last word in your ShortCut text. This way, a space 
automatically follows the ShortCut text.
4. Tap OK.
Tip:
To use a ShortCut, draw the ShortCut stroke followed by the 
ShortCut characters. When you draw the ShortCut stroke, the 
ShortCut symbol appears at the insertion point to show that 
you are in ShortCut mode.
Tap New 
						

							Chapter 9 Page 233
Editing a ShortCut
After you create a ShortCut, you can modify it at any time.
To edit a ShortCut:
1. Tap the ShortCut you want to edit.
2. Tap Edit.
3. Make the changes you want and tap OK.
Deleting a ShortCut
If you no longer need a ShortCut, you can delete it from the list of 
ShortCuts.
To delete a ShortCut:
1. Tap the ShortCut you want to delete.
2. Tap Delete.
3. Tap Yes.ShortCut
    
						

							Page 234  Setting Preferences for Your Handheld 
						

							Appendix A Page 235
Appendix A
Maintaining Your Handheld
This chapter provides information on the following:
nProper care of your Visor™ handheld computer
nProlonging battery life
nResetting your handheld
Caring for your handheld
Your handheld is designed to be rugged and reliable and to provide 
years of trouble-free service. Please observe the following general tips 
when using your handheld:
nTake care not to scratch the screen of your handheld. Keep the 
screen clean. When working with your handheld, use the supplied 
stylus or plastic-tipped pens intended for use with a touch-
sensitive screen. Never use an actual pen or pencil or other sharp 
object on the surface of the handheld screen.
nYour handheld is not waterproof and should not be exposed to 
rain or moisture. Under extreme conditions, water may enter the 
circuitry through the front panel buttons. In general, treat your 
handheld as you would a pocket calculator or other small 
electronic instrument.
nThe touch-sensitive screen of your handheld contains a glass 
element. Take care not to drop your handheld or subject it to any 
strong impact. Do not carry your handheld in your back pocket: if 
you sit on it, the glass may break.
nProtect your handheld from temperature extremes. Do not leave 
your handheld on the dashboard of a car on a hot day, and keep it 
away from heaters and other heat sources.
nDo not store or use your handheld in any location that is extremely 
dusty, damp, or wet.
nUse a soft, damp cloth to clean your handheld. If the surface of the 
handheld screen becomes soiled, clean it with a soft cloth 
moistened with a diluted window-cleaning solution. 
						

							Page 236  Maintaining Your Handheld
Battery considerations
Please note the following considerations when using the rechargeable 
battery in your handheld:
nUnder normal conditions, your handheld battery should provide 
four weeks of use between charges. You can conserve battery life 
by changing the Auto-off setting that automatically turns the 
handheld off after a period of inactivity, and by minimizing use of 
the backlight feature. See “General preferences” in Chapter 9 and 
“Using the backlight” in Chapter 1 for more information.
nIf the battery becomes low in the course of normal use, an alert 
appears on the handheld screen describing the low battery 
condition. If this alert appears, place your handheld in the cradle 
to charge the battery.
nIf the battery drains to the point where your handheld does not 
turn on, it stores your data safely for about two weeks. In this case, 
there is enough residual energy in the battery to store the data, but 
not enough to turn on your handheld. If your handheld does not 
turn on when you press the power button, you should charge the 
battery immediately.
nIf you leave a drained battery in your handheld for an extended 
period of time, you can lose all of the stored data. If this happens, 
charge the battery and use the reset button to reset your handheld. 
(See “Resetting your handheld” later in this chapter for details.) 
After you reset your handheld, perform a HotSync operation to 
restore the data from your computer.  
						

							Appendix A Page 237
Resetting your handheld
Under normal circumstances, you will not have to use the reset 
button. On rare occasions, however, your handheld may no longer 
respond to buttons or the screen. In this case, you need to perform a 
reset to get your handheld running again.
Performing a soft reset
A soft reset tells your handheld to stop what it’s doing and start over 
again. All records and entries stored in your handheld are retained 
with a soft reset. After a soft reset, the Welcome screen appears, 
followed by the General Preferences screen (to set time and date). 
To perform a soft reset:
1. Unscrew the tip of the stylus to access the reset tool.
2. Use the reset tool to gently press the reset button inside the hole on 
the back panel of your handheld.
Tip:
You can also use the tip of an unfolded paper clip (or 
similar object without
 a sharp tip). 
 
Reset 
tool 
						

							Page 238  Maintaining Your Handheld
Performing a warm reset
A warm reset bypasses system extensions on your handheld, such as 
HackMaster hacks or system patches. Performing a warm reset 
enables you to uninstall a third-party application that may be causing 
a problem.
To perform a warm reset:
1. Hold down the Page Up button on the front panel of the handheld.
2. While holding down the Page Up button, use the reset tool (or 
similar object without
 a sharp tip) to gently press the reset button.
3. When the system screen appears, release the Page Up button.
Performing a hard reset
With a hard reset, all records and entries stored in your handheld are erased. 
Never perform a hard reset unless a soft reset does not solve your problem.
 
Note: 
You can restore any data previously synchronized with your 
computer during the next HotSync operation.
To perform a hard reset:
1. Hold down the power button on the front panel of the handheld.
2. While holding down the power button, use the reset tool (or 
similar object without
 a sharp tip) to gently press the reset button.
3. When the system screen appears, release the power button.
4. When a message appears on the handheld screen warning that you 
are about to erase all the data stored on your handheld, do one of 
the following:
Press the top scroll button on the front panel of your handheld 
to complete the hard reset and display the Digitizer screen.
Press any other button to perform a soft reset.
Note:
With a hard reset, the current date and time are retained. 
Formats Preferences and other settings are restored to their 
factory default settings.
To restore your data after a hard reset:
1. Open Palm Desktop software.
2. From the HotSync menu, choose Conduit Settings. 
						

							Appendix A Page 239
3. From the User pop-up menu, select your user name.
4. Select an application in the Conduit list.
5. Click Conduit Settings.
6. Select Macintosh overwrites handheld.
Note:
Changing the HotSync setting from the default affects 
only the next
 HotSync operation. Thereafter, the HotSync 
Actions revert to their default settings. To use a new 
setting on an ongoing basis, click Make Default. 
Thereafter, whatever you selected as the default setting is 
used when you perform a HotSync operation.
7. Click OK.
8. Repeat steps 4 through 7 to change conduit settings for other 
applications.
9. Close the Conduit Settings dialog box.
10. Perform a HotSync operation. 
						

							Page 240  Maintaining Your Handheld