Handspring Visor Pro Handheld User Guide

							Chapter 6 Page 141
2. Review or edit the text in the memo. 
3. Tap Done.
Memo Pad menus
Memo Pad menus are shown here for your reference, and Memo Pad 
features that are not explained elsewhere in this guide are described 
here.
See “Using menus” in Chapter 1 for information about choosing menu 
commands.
The Record and Options menus differ depending on whether you’re 
displaying the Memo list or an individual memo.
Record menus
Options menus
Preferences 
Displays the Memo Preferences dialog box, 
where you define the sort order for memos. 
About Memo Pad
Shows version information for Memo Pad.
Tap a 
memo to 
review its 
contents
Memo list
Memo screen
Memo listMemo screen 
						

							Page 142  Application Specific Tasks
Calculator
Calculator includes two operating modes: Basic and Advanced. In 
Basic mode you can perform simple mathematical calculations. In 
Advanced mode you can access scientific functions and perform 
sophisticated math calculations. This section explains how to select 
the operating mode and use the buttons and menu options available 
in each mode.
Selecting the Calculator mode
The Change Mode dialog enables you to choose whether you want to 
work in Basic Calculator mode or Advanced Calculator mode. You 
can change modes at any time.
To select the Calculator mode:
1. Tap the Calculator icon   next to the Graffiti® writing area.
2. Tap the Menu icon  .
3. Tap Options, and then tap Change Mode.
4. Tap Basic or Advanced as the mode.
5. Tap OK.
Using the Basic Calculator buttons
The Basic Calculator includes the following buttons.
Clears the last number you entered. Use this button if 
you make a mistake while entering a number in the 
middle of a calculation. This button enables you to re-
enter the number without starting the calculation over.
Clears the entire calculation and enables you to begin a 
fresh calculation.
Toggles the current number between a negative and 
positive value. If you want to enter a negative number, 
enter the number first and then press
 the +/- button.
Places the current number in memory. Each new 
number you enter with the M+ button is added to the total
 
already stored in memory. You can add either a 
calculated value or a number you enter by pressing the 
number buttons. Pressing this button has no effect on 
the current calculation (or series of calculations); it 
merely places the value into memory until it is recalled. 
						

							Chapter 6 Page 143
Displaying Recent Calculations
The Basic Calculator’s Recent Calculations command enables you to 
review the last series of calculations and is particularly useful for 
confirming a series of “chain” calculations.
To display recent calculations:
1. Tap the Menu icon  .
2. Tap Options, and then tap Recent Calculations.
3. After you finish reviewing the calculations, tap OK.
Using the Advanced Calculator mode
The Advanced Calculator screen consists of three regions. Each region 
performs a different function to help you perform a variety of 
calculations.Recalls the stored value from memory and inserts it in 
the current calculation.
Clears any value that is stored in the Calculator 
memory.
Primary buttons 
available in all views
View specific buttons 
change with view
Tap here 
to change 
views 
						

							Page 144  Application Specific Tasks
Using the Advanced Calculator buttons
In addition to most of the Basic Calculator buttons, the Primary 
buttons are available in all the Advanced Calculator views. The 
remaining buttons are available only in specific views. The 
information that follows provides an overview of the Advanced 
Calculator functions. For more detailed information and instructions, 
visit the website: www.radiks.net/~rhuebner/parendoc.html
Primary buttons
Math buttons
Clears the entire calculation and enables you to begin a 
fresh calculation.
Clears the last digit you entered. Use this button if you 
make a mistake while entering a number in the middle 
of a calculation. This button enables you to re-enter the 
number without starting the calculation over.
Enters an exponent symbol in the calculation.
Opens the Constants dialog box where you can select a 
constant to include in the calculation. 
Opens the Store in which memory dialog box where you 
can select the memory bank in which you want to store 
the current value. Advanced Calculator has ten memory 
banks.
Opens the Recall which memory dialog box where you 
can select the memory bank from which you want to 
recall a value.
Squares the current value.
Calculates the value of x
 raised to the y power. 
Calculates the value of a common (base 10) 
antilogarithm.
Calculates the value of a natural (base e) antilogarithm.
Calculates the reciprocal of the current number.
Displays the integer portion of a decimal value. 
						

							Chapter 6 Page 145
Trigonometry buttons
Calculates the square root of the current number.
Calculates the inverse of x
 to the y
 power.
Calculates the common (base 10) logarithm.
Calculates the natural (base e) logarithm.
Displays the remainder of x/y
. 
Displays the decimal portion of a decimal value.
Calculates the sine of the current number.
Calculates the cosine of the current number.
Calculates the tangent of the current number.
Calculates the hyperbolic sine of the current number.
Calculates the hyperbolic cosine of the current number.
Calculates the hyperbolic tangent of the current number.
Calculates the arc (inverse) sine of the current number.
Calculates the arc (inverse) cosine of the current 
number.
Calculates the arc (inverse) tangent of the current 
number.
Calculates the arc (inverse) hyperbolic sine of the 
current number.
Calculates the arc (inverse) hyperbolic cosine of the 
current number.
Calculates the arc (inverse) hyperbolic tangent of the 
current number. 
						

							Page 146  Application Specific Tasks
Finance buttons
Finance buttons enable you to find an unknown variable value based 
on a group of known variable values.
For example, to calculate the monthly payment for a 30-year home 
loan of  $100,000 with an annual interest rate of 8%, you would enter 
the following variables:
nPayments/year = 12
nN = 360 (30 years x 12 months)
nAPR = 8
nPV = 100,000
nFV = 0
Using these variables, the answer would be -733.76 per month.
To solve this exmaple:
1. Enter a value and then tap the corresponding variable button. 
Repeat this process until you’ve entered the following four 
variables: 
nN = 360 (30 years x 12 months)
nAPR = 8
nPV = 100,000
nFV = 0
2. Enter 12 and tap the P/Yr button to enter the number of payments 
per year.
3. Tap Edit.
4. Tap the Pmt line and erase all values on the line including zero.
5. Tap Solve.
6. Tap Done.
You can use a similar process to solve other financial equations by 
entering four of the variables to find the value of the fifth variable. 
						

							Chapter 6 Page 147
Stores the current number as the total number of 
payments over the life of the loan.
Stores the current number as the annual percentage rate 
of interest.
Stores the current number as the number of payments 
per year.
Stores the current number as the initial loan amount.
Stores the current number as the payment amount.
Stores the current number as the compounded loan 
amount including interest.
Opens the Time Value of Money dialog box where you 
can modify values and solve the equation.
Stores the remaining balance, interest, and principal 
(amortization) based on the supplied values.
Calculates a given percentage of a value. To use this 
button, enter a value, tap this button, enter the percent, 
and then tap the equal sign button. 
Calculates the change in a value by a given percentage. 
To use this button, enter a value, tap this button, enter 
the percent, and then tap the equal sign button.
Calculates the percentage of one number relative to 
another number. To use this button, enter the first 
number, tap this button, enter the second number, and 
then tap the equal sign button.
Calculates the percentage required to get to one value 
from another value. To use this button, enter the result 
number, tap this button, enter the starting number, and 
then tap the equal sign button. 
						

							Page 148  Application Specific Tasks
Logic buttons
Statistics buttons
Shifts the value to the left and fills the new places with 
zeros.
Enters D in a hexadecimal calculation.
Enters E in a hexadecimal calculation.
Enters F in a hexadecimal calculation.
Calculates bit-by-bit commonalities between two 
arguments.
Calculates bit-by-bit unique occurrences in two 
arguments.
Shifts the sign bit to the right in signed mode.
Enters A in a hexadecimal calculation.
Enters B in a hexadecimal calculation.
Enters C in a hexadecimal calculation.
Calculates the inverse of each bit of the argument.
Calculates the exclusive OR between two arguments.
Adds the current value to the end of the statistics 
memory list. You can store up to 200 values.
Calculates the mean of the values in the statistics 
memory list.
Calculates the standard deviation based on a population 
of n
.
Calculates the standard deviation based on a population 
of n-1
.
Calculates the sum of the values in the statistics memory 
list. 
						

							Chapter 6 Page 149
Weight/Temp buttons
Calculates the square of the sum of the values in the 
statistics memory list.
Opens the Statistical Data dialog box where you can 
view, edit, delete, and clear values in the statistics 
memory list.
Displays the number of values in the statistics memory 
list.
Calculates the factorial of any integral from 0 to 170.
Generates a random number between 0 and 32767 and 
then divides this number by 32768 to generate a random 
fraction between 0 and .99997.
Returns the number of combinations of n
 items taken m
 
at a time.
Returns the number of permutations of n
 items taken m
 
at a time.
Indicates the current value is entered in ounces. When 
you tap this button after tapping another unit of 
measure, it converts the value to ounces.
Indicates the current value is entered in pounds. When 
you tap this button after tapping another unit of 
measure, it converts the value to pounds.
Indicates the current value is entered in US tons. When 
you tap this button after tapping another unit of 
measure, it converts the value to US tons.
Indicates the current value is entered in UK tons. When 
you tap this button after tapping another unit of 
measure, it converts the value to UK tons.
Indicates the current value is entered in milligrams. 
When you tap this button after tapping another unit of 
measure, it converts the value to milligrams.
Indicates the current value is entered in grams. When 
you tap this button after tapping another unit of 
measure, it converts the value to grams. 
						

							Page 150  Application Specific Tasks
Length buttons
Indicates the current value is entered in kilograms. 
When you tap this button after tapping another unit of 
measure, it converts the value to kilograms.
Indicates the current value is entered in metric tons. 
When you tap this button after tapping another unit of 
measure, it converts the value to metric tons.
Indicates the current value is entered in degrees 
Fahrenheit. When you tap this button after tapping 
another unit of measure, it converts the value to degrees 
Fahrenheit.
Indicates the current value is entered in degrees Kelvin. 
When you tap this button after tapping another unit of 
measure, it converts the value to degrees Kelvin.
Indicates the current value is entered in degrees Celsius. 
When you tap this button after tapping another unit of 
measure, it converts the value to degrees Celsius.
Indicates the current value is entered in inches. When 
you tap this button after tapping another unit of 
measure, it converts the value to inches.
Indicates the current value is entered in feet. When you 
tap this button after tapping another unit of measure, it 
converts the value to feet.
Indicates the current value is entered in yards. When 
you tap this button after tapping another unit of 
measure, it converts the value to yards.
Indicates the current value is entered in miles. When you 
tap this button after tapping another unit of measure, it 
converts the value to miles.
Indicates the current value is entered in nautical miles. 
When you tap this button after tapping another unit of 
measure, it converts the value to nautical miles.
Indicates the current value is entered in millimeters. 
When you tap this button after tapping another unit of 
measure, it converts the value to millimeters.