GTE Omni Si Database Technical Practices Manual

TL-130400-1001Table 7.1Entry Field for Record Code HG
COL.COL.VALID
NO.NAMEENTRIESCOMMENTS
12-15Hunt Group Pilot 0000-9999This field assigns the pilot number that is used
Number
;00)-(999) =to access the hunt group.
-When a pilot number is dialed, the hunt
x-.”numberbegins for stations assigned on Record Code
A three-digitMH. When the normally assigned directory
number must havenumber of a station in a hunt group is dialed,
a blank before it.hunting occurs only for hunt group types
TMMP and CRMP.
....

TL-130400-1001Record Code MH:7.2 Record Code MH, Figure 7.2, defines the station member
Hunt Groupdirectory numbers for the various hunt group pilot numbers.
MembersThe order for call attempts to the hunt group members is also
defined on this record code. This record code is used in
conjunction with Record Code HG.
-T-T-T-t-T-T-T-t-T-T-T-T-T-T-T-T-T-T-T-T-~-~-~-~-~-,I1 I1 I1 I1 II It I1 I1 I1 I1...

COL.NO.
12-15
16-18I Hunt Sequence
I Number
19-22I Member
I
Directory
I Number
IHunt Group Pilot
INumber
s-.”
SVR 5210TL-130400-1001
Table 7.2Entry Fields for Record Code MH
COL.NAMEVALID
ENTRIES
0000-9999 =number
or
(000)(999) =
number
A three-digit
number must have
a blank before it.
000-255 = number
0000-9999 =number
goo)-(999) =number
A three-digit
number must have
a blank before it.COMMENTS
This field assigns the pilot number of the hunt
group.-Use phantom numbers for the pilot numbers;
this saves...

TL-130400-1001Record Code GC:
Group Speed7.3 Record Code GC, Figure 7.3, defines the speed calling
Callinggroups used by the system’. The directory numbers that make up
this group or groups are listed on Record Code GS. This record
code allows access to portions of or all of the system’s group
speed calling list. This release allows 
up to a 1000 teleohonenumbers in the group speed calling list. .
,-----e-e---- ---,-----------~-----------------------------------------------I...

LTL-130400-1001
Table 7.3Entry Fields for Record Code GC
COL.COL.VALID
NO.NAME
ENTRIESCOMMENTS
12-13Group Number01-48 = numberThis field determines the group number for the
list.-This number is used on Record Code LD
when assigning the speed call list to users.
14-16Group Speed000-999 = number
Calling ListColumns 14-l 9 determine the range of
Entri-esentries in the group speed calling list that a
(first entry) 
‘-station user is allowed to access. Columns
14-16 are used to list the first entry, and...

TL-130400-1001Record Code GS:
Group Speed7.4 Record Code GS, Figure 7.4, defines the speed call
Calling Listnumbers that make up the group speed calling list. The list can
contain a maximum of 1,000 different numbers.
Numbersr---------,--e--
I~----^-----------------------------,-----------------------~-~
ITI
IxI
II 
-I1I
I
I
I5II
II
II
II
%aIIII
I
I Mt:CALLINGII
IIICl
I
101IIIIDIII!GIIIEIII1II I
I’ RI
II III I
I
I
II
III II
I
IIII
IIII III I
iI
I
III
I:-;-;-;-T-T-T-~-T-~-~-~-~-~-~-~II I
II1II III1 I1 I1...

TL-130400-1001Table 7.4Entry Fields for Record Code GSCOMMENTS
000-999 = numberThis fielddetermines thegroupspeedcalling
-These digits should be filled in from left to
right with no imbedded dashes.
-This number must be unique across this
record code.
-This number must be listed on Record Code
should these restrictions be in effect.
accesscheck
BT = bypass both
access checksSVR 5210
8187D-l 37 

TL-130400-1001
Record Code ED:Extended Dial Call7.5 Record Code ED, Figure 7.5, assigns pickup groups to
Pickup 
Numb&sextended dial call pickup groups. The pickup groups that make
up the extended dial call pickup groups are set up on this record
code. Because the pickup groups are created on this record
code, they are not redefined on Record Code LD. If a user is a
member of an extended dial call pickup group, Record Code LD
only lists the extended dial call pickup group to which the user
belongs, not...

TL-130400-1001Table 7.5Entry Fields for Record Code EDCOMMENTS
Table Numbers
dial call pickup group to which that line
call pickup groups, each containing a
maximum of 5 pickup groups.
-There is no limitation to the number of
stations that make up a pickup group.
-The table number must be unique across
This field determines the pickup groups that
make up the primary extended dial call pickup
group. All members of this extended dial call
make up the 2nd extended dial callpickup
group.All members of this...

TL-130400-1001Record Code CH:7.6 Record Code Cl-l, Figure 7.6, determines the feature or
Change Feature
by Access Codedestination that will be temporarily changed by the use of an
access code. The line always diverts to the alternate destination
whenever that route is accessed. What the feature or destination
is temporarily changed to is also defined. The access code
used to indicate this feature is set up on Record Code AC under
code type numbers 50 (change/restore feature by access code)
and 51...