GTE Omni Si Database Technical Practices Manual

SW 5210TL-130400-1001
Table 5.4Entry Fields for Record Code SA
COL.VALID
NAME
ENTRIESCOMMENTS
Time Between000-254 = time in
AuthorizationThis field determines the selected elapsed
seconds
Number and orseconds required between sending the
Digitsauthorization number and the digits.
015 = suggested
value
Bypass ToilY = required
Restriction 
‘,N = not requiredThis field determines whether or not a bypass
of toll restriction is allowed when the final
Check on Final
Directory
Numberdirectory number is entered. 

TL-130400-1001
Record Code I1 :5.5 Record Code 11, Figure 5.5, defines the valid international
Internationalcountry codes for MERS (Most Economical Route Selection)
Cohlntry CodeIDDD (International Direct Distant Dialing) processing.
,---------7-----7---------------------------------------------------------~-~III
I
I1I; F -S N; R Cl V,-:CgiM.$..“I E 0, A 0 ,,c D L u
0 E’ I N ’IRrD; D T ;RIC’l
I.101IDIIIElII I
I
I
I
E II ’II I
I ,,I II
I...

--TL-130400-1001
CLASS OF SERVICE
6.0 This section describes the record codes required to define
the system classes of service. The following record codes are
required:
l Record Code DC defines the trunk groups allowed for the
various classes of service.
l Record Code DD defines the system features allowed for the
various classes of service.SVR 5210l Record Code NC defines additional system features allowed
for the various classes of service. 

TL-130400-1001
Record Code DC:6.1 Record Code DC, Figure 6.1, allows system users accessDisplayableto the various trunk groups (00-63) within the system. Sixteen
Class of Servicedifferent displayable classes of service are possible.
-..A COS provide access to certain trunk features or allows certain
types of calls to be made. The classes of service assigned in
the system are defined by three different record codes: DC, DD,
and NC. Record Code NC defines the n-displayable classes of
service. Record Codes...

TL-130400-1001
COL.
NO.Table 6.1Entry Fields for Record Code DC
COL.VALID
NAME
ENTRIESCOMMENTS
12-13Displayable00-l 5 = numberThis field determines the number used to refer
Class of Service
to this displayable class of service.
%--It is recommended to use 00 as a default for./ .”trunks.
-The displayable class-of-service number
must be unique across the DC forms.
NOTE: COS 15 is normally reserved as the
COS for maintenance and is allowed access
to all trunk groups.
14-77Trunk GroupY = selectedThis field...

Record Code DD:6.2 Record Code DD, Figure 6.2, allows access to certainDisplayablesystem features. This record code is a continuation of record
Class Of Servicecode DC.
#----------ll----II  ’I,  NIIIFII  xII.-II
I1 I1 I1 I1 I1 I1 I1 I1 I1 I1 l2l2l2l2l2l212l2l212l3l~7~8~9,0,11213,41516171819,0,1,2,3,415,6171819,0,c-+-+-+-u-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
lOl3lOl~I~IOlOI I I I I I 1 I I I I I I I I I I IL-L-L-I-L-I-~-~-~-~-~-~-~-~-~-~-~-*-~-*-*-~-I-.L--L
-+-T-+-T-T-T-T-T-T-T-T-T-t-T-1...

TL-130400-1001
Table 6.2Entry Fields for Record Code DD
COL.COL.VALID
NO.NAME
ENTRIESCOMMENTS
12-13Displayable00-l 5 = numberThis field determines the number given to
Class of Serviceeach of the 16 possible displayable 
COSsNOTE: COS 15 is normally reserved for
_-maintenance and is allowed access to all.”features.
14-15Toll AccessTA = allowedIf toll restriction is in effect for the trunk group
-- = not allowedaccessed, this field determines whether or not
.
the toll restriction can be overridden.
-An...

TL-130400-1001
Table 6.2Entry Fields for Record Code DD (Continued)COMMENTS
PC allows access to the progressive
conference feature.
-For this feature to work, the system must
have an(FB-51279) eight-party conference
-If this field is marked PC, then Record Code
NC, columns 30-31, must be marked HS for
proper operation of the feature.
-If this fieldis marked TA
thenRecord Code
have an FB-17210 card.
-If this field is marked TA, then Record Code
NC, columns 40-41, must be dashed.
-- = not allowed-If this...

COL.NO.
34-35
36-37
38-39
40-41
42-43
44-45
46-47TL-130400-1001
Table 6.2Entry Fields for Record Code DD (Continued)
COL.NAME
Release LinkTrunks Access
*-.”Modem Access
MERS On
Network
CO Line
MERSO+ 
or-Toll Restriction
MERS
Executive
Bypass
International
Direct Distant
Dialing AccessVALID
ENTRIES
RL = allowed-- = not allowed
MD = allowed-- = not allowed
MN = allowed-- = not allowed
CL = allowed-- = not allowed
TR=O+ 
or-restriction
--Z”Orestriction
EB = searches all
routes-- = call is
placed into...

TL-130400-1001Record Code NC:6.3 Record Code NC, Figure 6.3, defines the n-displayable
N-DisplayableCOS used to allow or restrict station access to the system
Class of Servicefeatures. If remote access authorization codes are used, make
sure that Record Codes DC and DD have a field that meets the
requirements of that code. Since a class of service is assigned
on a line basis not a station basis, the term line user is used as
opposed to station user when defining class-of-service
features....