GTE Omni Si Database Technical Practices Manual

TL-130400-1001
Table 6.3AEntry Fields for Record Code NC
COL.COL.VALID
NO.NAMEENTRIESCOMMENTS
12-13N-Displayable00-l 5 = numberThis field determines the number assigned to
Class-of-the COS defined in this row.
Service Number-It is recommended not to assign 00 as a
z-, .”station COS. COS 15 is normally reserved for
maintenance and is allowed access to all
features.
14-SExecutiveEX = allowedThis feature allows a third party to break in to
Override 
‘--- = not alloweda two-party connection.
-This feature...

TL-130400-1001Table 6.3AEntry Fields for Record Code NC (Continued)COMMENTS
-- = notallowed
call forwarding automatically to any destination
within the system.
redetermined location when this feature is
ctivated. If the call forwarding variable
eatureis allowed, that feature provides the
tooverride the forwarding condition.
assign this feature to a
-- = not allowedto 
z ztation with a COSmarkedDS.-A hookswitch flash is used to access
system features. For normal applications, this
feature is not required...

TL-130400-1001
Table 6.3AEntry Fields for Record Code NC (Continued)
COL.COL.VALID
NO.NAMEENTRIESCOMMENTS
36-37Universal NightUN = allowedUN allows retrieval of UNA calls at this line.
Answer-- = not allowed-The universal night answer feature is either
s-.-.I .”a bell or light that indicates an incoming call.
38-39Originating OnlyOR = allowedOR allows a line user to make calls only, not
-- = not allowedreceive them.
-Hot line telephones are normally configured
.Ias originating only.
40-41Terminating...

TL-130400-1001COL.NO.Table 
6.3AEntry Fields for Record Code NC (Continued)
COL.VALID
NAMEENTRIESCOMMENTS
50-51ServiceSF = allowedThis field determines whether or not the
Function Phone-- = not allowed
service feature is allowed.
%-- A station marked SF will not be blocked if.I 1the motel room block feature is in effect.
-Room blocking is used in a motel
application. Room blocking prevents rooms
from calling one another directly. Motel
service telephones such as the valet, maid, or
food service...

TL-130400-1001Table 6.3AEntry Fields for Record Code NC (Continued)COMMENTS
-- = notallowedthe user telephone. The feature works much
like an alarm clock.
-- = not allowedappears at a message waiting answer center.
-If a message waiting answer center
telephone answers a call from a station that
has message waiting activated, the message
waiting feature is automatically canceled.
callingnumber di
-This field is only u
forwarded to them.
-Called number display service and calling
number display phone are...

TL-130400-1001COL.NO.Table 
6.3AEntry Fields for Record Code NC (Continued)
COL.VALID
NAME
ENTRIESCOMMENTS
64-65ComputerCA = allowedCA allows computer access.
Access-- = not allowed-This feature interfaces with compatible
equipment and is designed to interface with
%-.”
. .Wavetech. Wavetech is a system used in
credit card checking. It determines whether
or not the card holder is over the credit
amount allowed. A dial tone is sent to the
called station (Wavetech equipment) when the
originating station...

TL-130400-1001Table 6.38N-Displayable Class of Service Conflicts and ViolationsSECOND FEATURE
TM V V V V V
PD
HD
PK
SD
CD
CA
SC
V
VR
R
VR
V
KEY:R=The second feature is required for the first feature to
operate properly. (Example: EX requires HS.)
v=Only one or the other of the two features can be specified
within the same class of service. (Example: EX conflicts with
TM.) 

TL-130400-1001
Table 6.3C Abbreviations
IAF - Administrative Function PhoneIMA - Message Waiting Answer CenterIIAl 
- Attendant Information Calls1 OC - Originating Call Waiting
CA 
- Computer Accessv-OR - Originating Only
CD 
- Catled Number Display
CF 
- Call Forwarding - Fixed
CN 
- Calling Number Display,ServicePD 
- Permit to Receive DID
PK 
- Call Park
SA 
- Special Common Carrier Access
CO 
- Camp-on/Automatic Recall
CV 
- Call Forwarding - Variable
DC 
- Dial Call PickupSC 
- Group Speed Calling...

TL-130400-1001
LINE7.0 This section describes the record codes required to
FEATURESdefine the various system line features. The following record
codes are required:
l Record Code HG defines the station hunt groups.0 Record Code MH defines the station hunt group members.
l Record Code GC defines the system speed calling groups.
l Record Code GS defines the system speed calling numbers.
l Record Code ED defines the system pickup groups.
l Record Code CH defines the “change feature by access
code” feature....

TL-130400-1001Record Code HG:7.1 Record Code HG, Figure 7.1, defines the station hunt group
Hunt Groupdata requirements. The station hunting feature provides for a call
to route to an idle station of a prearranged group of stations. The
group of stations is defined by a pilot number. If the PNA
(Predetermined Night Answer) and ACD (Automatic Call
Distribution) station hunt groups are selected, they must be
assigned here.
__.”The system supports a maximum of 256 hunt groups. Of the total
hunt groups...