GTE Omni Scbs Installation And Maintenance Manual

Review Exercise - Savim and 
ading the Office Depeident 
Base (2,12) (Continued) 
8. THE SYSTEM AUTOMATICALLY INITIATES A 
FOLLOWING THE LOADING 
OF THE ODDB TAPE. 
9. IF THE ODDB TAPE VOLUME SERIAL NUMBER IS NOT CORRECT, THE PMP SCREEN WILL 
DISPLAY: 
10. WHAT IS INDICATED IF THE MESSAGE “BAD TAPE/SF VER,XXX” IS DISPLAYED ON THE PMP 
SCREEN? 
11. WHAT ADDITIONAL EQUIPMENT IS REQUIRED TO SAVE AND LOAD THE ODDB USING A 
FLOPPY DISKETTE? 
12. WHAT PROCEDURE MUST BE PERFORMED BEFORE A NEW FLOPPY DISKETTE...

Review Exercise 
- Saw& and 
Loading the Office D 
ase 
(2.112) (Con 
15. MATCH EACH OF THE FOLLOWING CMC COMMANDS WITH ITS CORRECT DEFINITION: 
CMC-902 A. LOAD ODDB TO SYSTEM MEMORY FROM TAPE OR FLOPPY DISKETTE. 
CMC-903 B. SAVE ODDB FROM SYSTEM MEMORY TO TAPE OR FLOPPY DISKETTE. 
2.227  

BASE ADMINISTR 
Implementation Forms 
2.228  

2.13 Enablinq Obiective 
GIVEN 0 
0 
0 
0 
0 
0 
ACTION: . 
CRITERIA: . 
0 
GTE OMNI SBCS 
GTE OMNI SBCS PERIPHERALS 
PORTABLE MAINTENANCE PANEL 
GTE OMNI SBCS COURSE AND SITE DOCUMENTATION PACKAGE 
LABORATORY ACTIVITY-COMPLETING AND USING OMNI SBCS IMPLE- 
MENTATION FORMS PACKAGE 
REVIEW EXERCISE 
INTERPRET AND USE OMNI SBCS IMPLEMENTATION FORMS PACKAGE AS 
ESSENTIAL TOOL FOR SYSTEM CONFIGURATION AND DATA BASE 
ADMINISTRATION. 
COMPLETE REVIEW EXERCISE 
DEMONSTRATION OF ABOVE TASKS IN ACCORDANCE WITH...

Laboratory Actiwity - Implementation 
GE’ 
OMNL7 SBCS 
PERFORM THE PROGRAMMING TASKS DESIGNATED BY THE COMPLETED SAMPLE IMPLEMENTATION FORMS 
ATTACHED TO THE WORK ORDER BELOW. COMPLETE THE REVIEW EXERCISE QUESTIONS PERTAINING 
TO THE IMPLEMENTATION FORMS PACKAGE UPON COMPLETION OF THIS LABORATORY ACTIVITY. 
WORK ORDER # 2.13 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 
LOCATION: RESTON. VIRGINIA WORK ORDER # 2.13 
ORIGINATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
l Reestablish the default standard...

Review Exercise - Implementation 
s Package (2.13) 
INSTRUCTIONS: THE FOLLOWlNG EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL 
IN THE BLANK, OR MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E., STUDENT 
WORKBOOK, NOTES, AND GTEP MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO 
INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN COMPLETED. 
1. THE IMPLEMENTATION FORMS PACKAGE PROVIDES: 
. 
A. INFORMATION USED TO DETERMINE HARDWARE AND SOFTWARE FAULTS. 
B. A PERMANENT RECORD OF...

Review Exercise - Implementation 
s Package (2.13) (Continued) 
6. 
7. 
8. 
9. THE IMPLEMENTATION FORM IS USED WHEN PROGRAMMING COMMON 
CARRIER ACCESS CODES FOR LEAST COST ROUTING IN AREAS WITH EQUAL ACCESS. 
WHAT CMC COMMAND AND PARAMETER SETTINGS ARE REQUIRED WHEN PROGRAMMING 
THE AUTOMATIC INTERCOM FEATURE USING THE BLF/DSS FEATURE ASSIGNMENT FORM? 
NAME TWO TYPES OF IMFORMATION REQUIRED FOR STATION INSTALLATION ON THE 
SINGLE LINE STATION DETAIL FORM THAT ARE NOT RELATED TO DATA BASE 
PROGRAMMING....

Student Notes 
GE 
OMNl’S.!ES 
2.233  

DULE Ill 
TENANCE  

Table of Contimts 
Page 
MAINTENANCE OVERVIEW 
. MAINTENANCE OVERVIEW (OBJECTIVES) ........ 
. 
MAJOR MAINTENANCE FUNCTIONS .............. 
. MAINTENANCE TOOLS .......................... 
. REMOTE MAINTENANCE ......................... 
* PREVENTIVE MAINTENANCE ..................... 
. VISUAL INDICATORS OF SYSTEM STATUS ........ 
. CPM LED LAMPS ................................ 
. REMOTE ALARM STATES ........................ 
. INSTRUMENT ALARM BUTTON ................... 
. VISUAL ALARMS SCHEMATIC...