GE Vivid 7 User Manual

Peripherals
Vivid7/Vivid7 PRO Users Manual387
FC092326-03
7. Press SELECT.
The VCR spools the tape and stops at the given counter 
value.
Additional playback features
When playing back an examination, part of it can be stored on 
the computer’s memory as a cineloop. The cineloop enables 
the user to perform further operations on the stored section 
(see page 62 for further information on cineloop operation).
To store a recorded sequence as a cineloop
1. Press 
FREEZE while playing back a recorded...

Peripherals
388Vivid7/Vivid7 PRO Users Manual
FC092326-03
Printing
The Vivid 7/Vivid 7 PRO ultrasound unit can support a color 
and a black & white thermal video printer. The printer devices 
are controlled from the 
PRINT keys on the control panel (see 
Figure 11-5).
The 
PRINT keys can also be configured to perform alternative 
storage (i.e. storage to DICOM media or secondary capture). 
See page 432 for configuration of the 
PRINT keys.
 Figure 11-5: The printer The printer controls on the Control...

Peripherals
Vivid7/Vivid7 PRO Users Manual389
FC092326-03
Specifications for peripherals
Please refer to the documentation accompanying the 
peripherals. 

Peripherals
390Vivid7/Vivid7 PRO Users Manual
FC092326-03 

Presets and System setup
Vivid7/Vivid7 PRO Users Manual391
FC092326-03
Chapter 12 
Presets and System setup
This chapter includes the following information:
• Introduction  ................................................................................... ..  392
• Starting the Configuration package  ............................................ ..  395
• To open the Configuration package  ......................................... 395
• Overview...

Presets and System setup
392Vivid7/Vivid7 PRO Users Manual
FC092326-03
Introduction
This chapter describes the configuration management package 
of the Vivid 7/Vivid 7 PRO ultrasound unit. The Vivid 7/
Vivid 7 PRO configuration package enables users to customize 
the global configuration for the unit and the application-specific 
settings.
In addition, users with administration rights have access to the 
local archive backup function, local archive restore function and 
creation of users.
The...

Presets and System setup
Vivid7/Vivid7 PRO Users Manual393
FC092326-03
• Templates • Configures the Report 
templates menu by selecting 
and ordering the templates to 
show in the menu.All
•  Diagnostic  codes Create or delete pre-defined text 
input for the referral reasons and 
diagnosis.All
•  Comment  texts Create or delete pre-defined text 
input for the comments.All
Connectivitypage 423
•  Dataflow Create new dataflows or 
configure existing dataflows.Admin
•  Additional outputs Configure the...

Presets and System setup
394Vivid7/Vivid7 PRO Users Manual
FC092326-03
•  Restore Restore local archive and 
system configuration from a 
backup.Admin
•  Users Operator and referring staff 
registration, operators rights 
settings.Admin
ServiceThis sheet is for service staff 
only. Deals with video selection, 
LCD light setting, printer 
definition and keyboard 
configuration.Admin Category and sublevel Description access Refer to 

Presets and System setup
Vivid7/Vivid7 PRO Users Manual395
FC092326-03
Star ting the Configuration package
To access the Configuration package the user has to log on as 
a specific user (see page 449). This ensures user-specific and 
user-defined settings and presets to be used.
The access to the entire configuration package is user 
configuration dependent (see page 449).
To open the Configuration package
1. Press CONFIG on the alphanumeric keyboard.
The Log In window is displayed asking for operator ID...

Presets and System setup
396Vivid7/Vivid7 PRO Users Manual
FC092326-03
Over view
The configuration management package consists of a Setup 
dialogue window divided in different setup categories with 
sublevels (sheets labelled with tab).
The functionality of each configuration category and associated 
sublevels are described on the following pages.
 Figure 12-2: The Setup dialogue window structure
1. Sublevel tabs for the 
selected Setup 
category.
2. Setup categories
3. Selected Setup 
category