GE Vivid 7 User Manual

Presets and System setup
Vivid7/Vivid7 PRO Users Manual407
FC092326-03
Parameter Description
Add measure:
Create or select from the pop-up list a 
measurement to be added to a folder.
Add folder:
Enables the user to create its own folder 
with the desired measurements. The 
folder is displayed the Measurement 
menu.
M&A Categories:
Enables selection of the measurement 
categories to display in the Measurement 
menu. Only checked items will be 
displayed.
• Create Copy: Enables copy of a 
selected...

Presets and System setup
408Vivid7/Vivid7 PRO Users Manual
FC092326-03
Configuration tools:
Deletes selected entry (folder 
or measurement) in the 
Measurement menu. The 
factory entries cannot be 
deleted.
Moves selected measurement 
or folder up or down inside the 
Measurement menu.
Folder:
Displayed when a folder is selected in the 
Measurement Menu.
Shows the entire contents of a selected 
folder.
•  : the items is displayed in the 
Measurement menu.
•  : The item is hidden from the 
Measurement...

Presets and System setup
Vivid7/Vivid7 PRO Users Manual409
FC092326-03
Configuration of the Measurement 
menu
Display of the Measurement categories
1. Press M&A categories in the Configuration window.
The M&A categories are displayed in a pop-up window 
(see page 407).
2. Check the categories to be displayed.
Uncheck the categories to hide.
To copy a Measurement categor y
1. Press M&A categories in the Configuration window.
The M&A categories are displayed in a pop-up window 
(see page 407).
2. Move the...

Presets and System setup
410Vivid7/Vivid7 PRO Users Manual
FC092326-03
Deleting an item in the Measurement menu
Only user created 
items can be delet-
ed.1. Trackball to the entry to delete in the Measurement menu.
2. Press 
SELECT.
3. Press   to delete the item.
Display/hide a folder or a measurement in the 
Measurement menu
The Measurement menu (Folders and Measurements) can be 
configured to display only the entries (folders and 
measurements) of interest.
To hide a folder or a measurement:
1.Uncheck...

Presets and System setup
Vivid7/Vivid7 PRO Users Manual411
FC092326-03
 Figure 12-7: The Add Measurement dialogue window
To add an existing measurement with pre-defined 
parameters
1. Select Use Copy of.
2. Select the measurement in the pop-up menu.
3. Press OK.
To create a measurement with user-defined parameters
1. In the Add measurement dialogue window, select Blank.
2. Press OK.
3. In the Measurement field, enter the measurement name.
4. Select the desired measurement type in the Tool pop-up 
menu....

Presets and System setup
412Vivid7/Vivid7 PRO Users Manual
FC092326-03
 Figure 12-8: The Edit formula dialogue window
5. Create a formula by selecting parameters, operators and 
functions.
Unit: All results are calculated in SI units. If the unit is not 
specified or not one in the table below, the displayed value 
will be in SI units. All conversions to other units must 
include a conversion factor in the formula. If the unit is one 
in the table below, the conversion factor will be included in 
the...

Presets and System setup
Vivid7/Vivid7 PRO Users Manual413
FC092326-03
Velocity m/s
Acceleration
m/s
2
Area
m2
Volume
m3
Volume flow
m3/s
Pressure mmHg
Pressure/time mmHg/s
Mass kg
OtherCalculation SI Alternative unit 

Presets and System setup
414Vivid7/Vivid7 PRO Users Manual
FC092326-03
Repor t
The Report configuration category is divided in three sheets:
• Te m p l a t e s: enables the configuration of the Te m p l a t e  
selection menu
• Diagnostic codes: enables the creation of pre-defined text 
inputs to be used in the Diagnosis information field in the 
Examination list window (see Figure 8-10, page 286).
• Comment texts: enables the creation of pre-defines text 
inputs to be used in the Comment information...

Presets and System setup
Vivid7/Vivid7 PRO Users Manual415
FC092326-03
The Report templates sheet
 Figure 12-9: The Report templates sheet
1. Application selection pop-up menu
2. List of factory and user-defined report templates 
for the selected application
3. List of report templates shown in the Templat e 
selection menu for the selected application
4. Add/remove selected template to/from the 
Template selection menu.5. Move selected template up/down in the Tem plate 
selection menu.
6. Open selected...

Presets and System setup
416Vivid7/Vivid7 PRO Users Manual
FC092326-03
Configuration of the Template selection menu
The configuration of the Template selection menu is done by:
•  Selecting the application specific Template list (left field) 
and the application specific Template selection menu (right 
field).
•  Inserting or removing report templates to/from the Te m p l a t e  
selection menu.
•  Sorting the report templates in the Template selection 
menu.
Procedure
Selecting the application specific...