GE Logiq P5 User Manual

System Administration
LOGIQ 5 Basic User Manual 16-121
Direction 2300002-100 Rev. 2
System Admin
The System Admin screen has information about any options 
implemented for the system.
 Figure 16-79. Administrative System Admin Preset Menu 
Table 16-66: System Administration
Preset ParameterDescription
Product The name of the product.
HW Number The hardware number of the product.
SW Option Key The software option key.
New To enter a new software option key, select New and 
then enter the software option...

Customizing Your System
16-122 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2 

LOGIQ 5 Basic User Manual 17-1
Direction 2300002-100 Rev. 2
Chapter 17
Probes and Biopsy
This chapter consists of the information of each probe 
and describes some special concerns, biopsy kits and 
accessories as well as basic procedures for attaching a 
bispsy guide to the different types of probes.  

Probes and Biopsy
17-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Probe Overview
Ergonomics
Probes have been ergonomically designed to:
•  Handle and manipulate with ease
•  Connect to the system with one hand
•  Be lightweight and balanced
•  Have rounded edges and smooth surfaces.
Cables have been designed to:
•  Connect to system with appropriate cable length
•  Stand up to typical wear by cleaning and disinfectant 
agents, contact with approved gel, etc.
Cable handling
Take the following...

Probe Overview
LOGIQ 5 Basic User Manual 17-3
Direction 2300002-100 Rev. 2
Probe orientation
Each probe is provided with an orientation marking (refer to 
Figure 17-1). This mark is used to identify the end of the probe 
corresponding to the side of the image having the orientation 
mark on the display.
 Figure 17-1. Orientation Marking on Probe
1. Orientation Mark
Labeling
Each probe is labeled with the following information:
•  Sellers name and manufacturer
• Operating frequency
•  GE part number
•...

Probes and Biopsy
17-4 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Labeling (continued)
 Figure 17-2. Probe Adapter Label
 Figure 17-3. Probe Handle Labels
GEMS-Am   GEMS-E   GEMS-A
MANUFACTURED
e.g. SEPTEMBER 1993
Also found on 
Probe Connector
E8C
3Cb
*GEMS-E-Am   *GEMS-A   *JAPAN    *GEMS-E 

Probe Overview
LOGIQ 5 Basic User Manual 17-5
Direction 2300002-100 Rev. 2
Labeling (continued)
 Figure 17-4. Probe Connector Labels
 Figure 17-5. Displayed Probe Information
1.  Probe Information Location
3Cb1
32
1
2
3
3Cb5CM7CE8C
GEMS-Am   GEMS-E   GEMS-A
MANUFACTURED
e.g. SEPTEMBER 1993Also found on 
Probe Connector
1 

Probes and Biopsy
17-6 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
LOGIQ 5 Applications
Table 17-1: Probe Indications for Use
Probe 
Application
3C3.5C5CE8C7L10L12L3S8C
Abdomen X X X X X X X
Small Parts X X X X X X X
Periph. Vasc. X X X X
Obstetrics XXXX X
Gynecology XXXX X
Pediatrics X X X X X
Neonatal X X X
Urology XXXX X X
Surgery X
Cardiac
Endocavity
Transcranial
Biopsy XXXX XX X 

Probe Overview
LOGIQ 5 Basic User Manual 17-7
Direction 2300002-100 Rev. 2
LOGIQ 5 Applications (continued)
Table 17-2: Probe Indications for Use (continued)
Probe 
Application
P2DP6D
Abdomen
Small Parts
Periph. Vasc. X
Obstetrics
Gynecology
Pediatrics
Neonatal
Urology 
Surgery
Cardiac X
Endocavity
Transcranial
Biopsy 

Probes and Biopsy
17-8 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
LOGIQ 5 Features
Table 17-3: Probe Features
Probe 
Application
3C3.5C5CE8C7L10L12L3S8C
Coded 
HarmonicsXX XXX X X
B-Flow X
Coded Contrast X
LOGIQ ViewXXXX XXX X X
Virtual Convex X X X
Easy 3D XXXX XXX X X
Advanced 3D  XXXX XXX X X
Anatomical MXXXX XXX X X
M Color Flow X X X
Tru Access XXXX XXX X X
Biopsy XXXX XXX
Non-Imaging 
CW