GE Logiq P5 User Manual

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-111
Direction 2300002-100 Rev. 2
Dataflow overview
The dataflow overview displays a three-level structure tree 
showing the following information:
•  A list of the dataflows configured (Level 1)
•  The network devices (Level 2)
•  The services associated to the dataflows (Level 3)
 Figure 16-74. Connectivity Views: Dataflows 

Customizing Your System
16-112 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Network overview 
The network overview displays a three-level structure tree 
showing the following information:
•  The network (Level 1)
•  Connected devices (Level 2)
•  The services configured for each device (Level 3)
 Figure 16-75. Connectivity Views: Network View 

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-113
Direction 2300002-100 Rev. 2
Buttons overview 
The buttons overview displays a three-level structure tree 
showing the following information:
•  The dataflows configured for the print keys (Level 1)
•  The destination device for the print key (Level 2)
•  The services associated to the buttons (Level 3)
 Figure 16-76. Connectivity Views: Add.Outp.View–Buttons 

Customizing Your System
16-114 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Viewing device or service properties
To display the properties information for a device or service:
1.  If necessary, select the + on the structure tree to expand the 
level.
2. Move the Trackball to the device or service.
3. Press Set to highlight the device or service.
The system displays information related to the device or 
service in the Properties section.
Verifying that a device is connected to the network
To...

M and A
LOGIQ 5 Basic User Manual 16-115
Direction 2300002-100 Rev. 2
M and A
Please refer to Chapter 7, General Measurements and 
Calculations for more information on setting up M&A Presets.  

Customizing Your System
16-116 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
System Administration
Overview
The Admin screen has the following three sections:
• Users – allows you to define user IDs, specify operator’s 
registration, operator’s rights, and registration of staff 
related to an examination (for example, referral doctors and 
sonographers).
• Logon – defines logon procedures.
• System Administration – lists all the options implemented 
in the system. 

System Administration
LOGIQ 5 Basic User Manual 16-117
Direction 2300002-100 Rev. 2
Users
The Users screen allows you to define user IDs. It also allows 
you to specify operators registration, operator’s rights setting, 
and registration of staff related to an examination (for example, 
referring and interpreting physicians).
 Figure 16-77. Administrative Users Preset Menu  

Customizing Your System
16-118 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Users (continued)
Table 16-63: User List 
Preset ParameterDescription
User List Lists the user ID for operators and other staff 
defined in the system. You can choose to display all 
user IDs, or only those for one of the following 
specific groups:Oper – operatorRef – referring 
physicianDiag – diagnostic physician
Table 16-64: Identity 
Preset ParameterDescription
Id The operator’s user ID.
Password The operator’s...

System Administration
LOGIQ 5 Basic User Manual 16-119
Direction 2300002-100 Rev. 2
Creating a user
1. Select New.
2.  Type the user ID and password.
3.  Type the user’s full name.
4.  Select the user’s group or groups.
5.  If the user needs full configuration and advanced operations 
access, select Admin.
Changing a user configuration
1. Move the Trackball to a user ID in the User List.
2. Press Set.
3.  Make the desired changes.
Deleting a user
1. Move the Trackball to a user ID in the User List.
2....

Customizing Your System
16-120 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Logon
The Logon section defines log on procedures.
 Figure 16-78. Administrative Logon Preset Menu 
Table 16-65: Logon
Preset ParameterDescription
Auto Logon Defines logon procedures:
• When cleared, to log on the user must select a 
user ID and enter a password.
• When selected, the system is started 
automatically, using the last user logon.
Common Network 
LoginDefine the user ID and password used to access 
the...