GE Logiq P5 User Manual

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-91
Direction 2300002-100 Rev. 2
Buttons
You can assign print buttons P1–P4 to a device or to a dataflow.
NOTE:  You can configure each print key to multiple output devices/
workflows. 
 Figure 16-65. Connectivity Buttons Preset Menu
The Buttons screen has the following sections of information:
1. Buttons – Select the print button.
2. Destinations – Display, add, or remove services for the 
selected print button.
3. Service Parameters – Specify service...

Customizing Your System
16-92 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Buttons (continued)
Table 16-57: Buttons
Preset ParameterDescription
Button Select the print button.
Select destination Select output services to associate to the selected 
button. The system displays the following 
information about the service:NameTypeServer – 
the device for which the service was configured.Dir 
– direction: input, output, or both (I+O). Only output 
services can be associated to the print buttons....

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-93
Direction 2300002-100 Rev. 2
Capture Area Definitions
Video AreaVideo Area example: 
 Figure 16-66. Video Area Capture Area 

Customizing Your System
16-94 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Capture Area Definitions (continued)
Image AreaImage Area example: 
 Figure 16-67. Image Area Capture Area 

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-95
Direction 2300002-100 Rev. 2
Capture Area Definitions (continued)
Whole ScreenWhole Screen example: 
 Figure 16-68. Whole Screen Capture Area 

Customizing Your System
16-96 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Adding a service to a Print key
NOTE:  Only output services that have been configured can be 
associated to a dataflow. To configure a service, See ‘Services 
(Destinations)’ for more information.
1.  In the Button field, select Print1, Print2, Print3, or Print4.
2.  In the Destinations section, select a service from the Select 
destination(s) list (see Figure 16-65).
3.  In the Destinations section, select Add.
The new...

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-97
Direction 2300002-100 Rev. 2
Dataflow
A dataflow is a set of pre-configured services. When you select 
a dataflow, the ultrasound system automatically works according 
to the services associated with the dataflow. The Dataflow tab 
allows you to select and review information about dataflows. You 
can also create, change, and remove dataflows.
NOTE:  You must be logged on as Administrator to use the Dataflow tab.
 Figure 16-69. Connectivity Dataflow...

Customizing Your System
16-98 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Dataflow (continued)
Table 16-58: Dataflow 
Preset ParameterDescription
Name Select the dataflow from the list.
Direct Search Select whether to search through all patients or 
today’s patients only.
Default Select to use this dataflow as the default dataflow 
when you start the system.
Direct Store Select to store data directly to archive (no buffer 
storage).
Hidden Select to 
Select Service Select the services to...

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-99
Direction 2300002-100 Rev. 2
Selecting the default dataflow
1.  In the Dataflow section, in the Name field, select the 
dataflow.
2. Select Default.
When you start the system, it selects the dataflow by 
default.
3.  To have the system store data to the archive (no buffer 
storage), select Direct Store.
NOTE:  When you select the Default check box, it becomes grey and 
cannot be cleared. To change the default dataflow, you must 
select another...

Customizing Your System
16-100 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Defining a service priority (Role)
A dataflow can have many input, output, or I+O services, but 
only one of each type can be primary. For output services, the 
primary service defines the image format and image data 
contents.
1.  In the Dataflow section, in the Name field, select the 
dataflow.
2.  In the Services section, select the service.
3.  In the Selected Service section, in the Role field, select the 
role for...