GE Logiq P5 User Manual

Application Presets
LOGIQ 5 Basic User Manual 16-61
Direction 2300002-100 Rev. 2
User-Defined Application Presets (continued)
5.  To view/edit the parameters for the user-defined preset, 
press Utility --> Imaging. 
If you change the settings for this application, make sure to 
save the changes via Save --> Overwrite (user application). 
 Figure 16-43. Imaging Presets for User-Defined Application
NOTE:  If you select Reload Factory Defaults for the User-Defined 
application that you created, the settings...

Customizing Your System
16-62 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Test Patterns
Overview
There are different test patterns available: Gray Bars, Color 
Bars, Resolution, Text, Monitor Calibration, White, Gray, Red, 
Green and Blue.
Table 16-38: Available Test Patterns 

Test Patterns
LOGIQ 5 Basic User Manual 16-63
Direction 2300002-100 Rev. 2
Brightness Calibration
To calibrate the monitor, 
1.  Select Calibration from the Test Pattern Utility Touch Panel. 
The test pattern consists of a small box inside a larger box. 
NOTE:  Calibrate the monitor in a dim room. 
 Figure 16-44. Brightness Calibration Test Pattern
2.  Press the Brightness/Contrast control on the front of the 
monitor. 
3.  Set the Contrast at 50. 
4.  Set the Brightness at 100. Then slowly decrease the...

Customizing Your System
16-64 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Configuring Connectivity
Overview
You use Connectivity functionality to set up the connection and 
communication protocols for the ultrasound system. This page 
gives an overview of each of the Connectivity functions. Each 
function is described in detail in the following pages.  

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-65
Direction 2300002-100 Rev. 2
Connectivity Functions
To set up your institution’s connectivity, you must login with 
administrator privileges. 
1. TCPIP: allows you to configure the Internet Protocol.
2. Services: allows you to configure a service (for example, 
DICOM services such as printers, worklist, and other 
services such as video print and standard print) from the list 
of supported services. This means that the user can 
configure a device...

Customizing Your System
16-66 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
TCPIP
This configuration category enables users with administrative 
rights to set the TCPIP for the system and connected remote 
archive.
1.  Type the name of the Ultrasound system in the Computer 
Name field. 
2.  In the IP settings section, identify the ultrasound system to 
the rest of the network by one of the following:
•  DO NOT enable DHCP.
•  Type the IP-Address (acquire unique static IP address 
from hospital...

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-67
Direction 2300002-100 Rev. 2
TCPIP (continued)
 Figure 16-45. Connectivity TCPIP Preset Menu  

Customizing Your System
16-68 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
TCPIP (continued)
Table 16-39: Computer Name
Preset ParameterDescription
Computer Name Type the AE Title of the Ultrasound system (no 
spaces in name).
Table 16-40: IP settings
Preset ParameterDescription
Enable DHCP DO NOT select this box to enable dynamic IP 
Address selection.
IP-Address Type the IP Address of the Ultrasound system. 
NOTE: IP stands for Internet Protocol. Every device 
on the network has a unique IP...

Configuring Connectivity
LOGIQ 5 Basic User Manual 16-69
Direction 2300002-100 Rev. 2
Services (Destinations)
The Services screen enables users with administrative rights to 
add and remove destination devices, add and remove services, 
and change service parameters. This means that the user can 
configure a device with the DICOM service(s) that particular 
device supports. 
 Figure 16-46. Connectivity Services Preset Menu
The Services screen has the following sections of information:
1. Destination...

Customizing Your System
16-70 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Services (Destinations) (continued)
2. Services - lists information about services for the 
destination device. You can add services, select from a list 
of currently existing services, and remove services.
3. Service Parameters - lists parameters for the service 
currently selected in the Services section. The name and 
parameters in this section change, depending on what 
service is currently selected. In the above...